What are the requirements for undergraduate graduation?

Ⅰ What are the conditions for undergraduate graduates to obtain graduation certificates and degree certificates

On the basis of passing all grades, degree certificates have higher requirements. Most schools in our country require a grade point of 2.0 or above (usually a weighted average score of 70) to be awarded a bachelor's degree, otherwise you can only get a diploma. Some schools have special requirements. For example, if someone cheats on an exam, they will only receive a diploma when they graduate, but not a bachelor's degree.

Graduation certificate, the holder of the certificate has systematically studied certain scientific and cultural knowledge in a certain level of school.

(1) What are the requirements for undergraduate graduation? Extended reading

Degree certificates are divided into four categories: doctoral degree certificate, master's degree certificate, bachelor's degree certificate and professional degree certificate Category, among which, the bachelor's degree certificates are printed with the words "undergraduate graduates of general higher education", "undergraduate graduates of adult higher education" and "undergraduate graduates studying in China" according to the degree recipients.

Professional degree certificates are divided into three types: doctoral degree certificates, master's degree certificates and bachelor's degree certificates according to the degree level awarded. The words "Professional Degree Certificate" are printed above the bottom edge of the degree certificate plate.

1. Doctorate degree certificate: The A4 paper is printed with lace around the edge, the shading is set off by the anti-counterfeiting pattern watermark, the national emblem of the Republic of China is printed on the upper part, and the words "Doctorate degree certificate" are printed below; The center of the page is pink, and is printed with relevant information about the award of a doctorate degree; there is a space on the right side for photos of degree recipients.

2. Master's degree certificate: The A4 paper is printed with lace around the edge, the shading is set off by the anti-counterfeiting pattern watermark, the national emblem of the Republic of China is printed on the upper part, and the words "Master's degree certificate" are printed below; The center of the page is light blue, and is printed with information about the awarding of a master's degree; there is space on the right side for photos of degree recipients.

3. Bachelor's degree certificate: The A4 paper is printed with lace around the edge, the shading is set off by the anti-counterfeiting pattern watermark, the national emblem of the Republic of China is printed on the upper part, and the words "Bachelor's degree certificate" are printed below; The center of the page is light green, and is printed with relevant information about the awarding of bachelor's degrees; there is a space on the right side for photos of degree recipients.

Above the bottom edge of the page, the words "undergraduate graduates of general higher education", "undergraduate graduates of adult higher education" and "undergraduate graduates studying in China" are printed according to the different degree recipients.

4. Professional degree certificate: The center of the page is printed with the relevant content of awarding a professional degree. The words "Professional Degree Certificate" are printed on the top of the bottom edge of the page. Other corresponding doctorate, master's and bachelor's degree certificates are as mentioned above. The format is the same.

The production process of diplomas differs depending on the nature and level of different grades. Among them, the highest-grade university diplomas and postgraduate diplomas. Since 2008, university graduation certificates across the country have adopted the style of combining the top and bottom. This style makes the certificate authoritative. Whether it is the design of the shading, The anti-counterfeiting query of certificates has reached a very high level.

Graduation certificate cover material: artificial leather, imitation leather, special paper, varnished cloth.

Graduation certificate cover technology: heat sealing, hot stamping, cutting, etc.

Ⅱ For undergraduate graduates, what are the requirements for applying to be an intermediate engineer and what are the exams?

Application conditions

⒈Assistant level:

⑴ Graduated from a university and engaged in professional and technical work for more than one year.

⑵Graduate from a college and have been engaged in professional and technical work for more than two years.

⑶ Graduated from technical secondary school and engaged in professional and technical work for more than three years.

⑷Graduate from high school and have been engaged in professional and technical work for more than seven years.

⑸ Personnel with junior high school education or below, who have been engaged in professional and technical work for more than ten years, and should also have officer-level positions.

⒉Intermediate level:

⑴Graduate from a university, have been engaged in professional and technical work for more than five years, and have served as an assistant for more than four years.

⑵ Graduated from a college, engaged in professional and technical work for more than six years, and served as an assistant for more than four years.

⑶ Graduated from technical secondary school (high school), engaged in professional and technical work for more than ten years, and served as an assistant for more than four years.

⑷ Personnel with junior high school education or below must have been engaged in professional and technical work for more than fifteen years and have served as assistants for more than four years.

⒊Senior:

⑴Graduate from a university, have been engaged in professional work for more than ten years, and have held intermediate positions for more than five years.

⑵College graduates, engaged in professional and technical work for more than fifteen years, and held intermediate positions for more than five years.

⑶ Graduated from technical secondary school or high school, engaged in professional and technical work for more than 20 years, and held intermediate positions for more than five years.

Apply for exceptions

In order to select talents in an eclectic way, those who have real talents, outstanding achievements, and outstanding contributions can apply for high-level, high-level, and high-level qualifications regardless of academic qualifications and qualifications. Qualifications for mid-level positions.

Applicants who apply for senior positions must meet two of the following conditions:

1. Subject leaders who have been commended by the ministry and provincial level; people who have made outstanding contributions at or above the prefectural and municipal levels , young experts; township entrepreneurs or outstanding factory directors and managers who have won national and provincial awards.

2. Main projects that have won the third prize or above of the National Science and Technology Progress Award; the second prize or above of the province or ministry; the first prize or above of the prefecture-level city (including the Invention Award, Achievement Award, Natural Science Award, and Spark Award) Completers; main production technology leaders who have won national gold or silver product awards or provincial or ministerial famous brand product awards or outstanding engineering awards; main production technology leaders who have created national or provincial new product awards.

3. Those who directly preside over the completion of large-scale projects or are fully responsible for the production, operation and management of large and medium-sized enterprises or have made outstanding contributions to the technological development of non-public enterprises and achieved significant economic benefits; the company's operating income has been 20 million for two consecutive years The main persons in charge are those whose profits and taxes are more than 4 million yuan (more than 10 million yuan in mountainous counties determined by the province) or more than 4 million yuan (more than 2 million yuan in mountainous counties determined by the province).

4. In technological invention, innovation, transformation, patent, promotion and application, the economic benefits obtained account for the total profit and tax of the enterprise (more than 4 million yuan) for two consecutive years (the first two years of applying for senior positions) , more than 2 million yuan in poverty-stricken mountainous areas) the main technical person in charge of more than 20 years.

5. Create valuable experience in the work of this professional and technical position and be a major contributor to promotion in the same industry in the province; have achieved remarkable results while serving in intermediate positions, and have obtained advanced jobs at the provincial level or above or the local

Professional title evaluation certificate

Published more than two academic papers recognized as valuable by experts in the field in newspapers or conferences above the city, or officially published Valuable works or translations.

Applicants who apply for mid-level positions as an exception must meet two of the following conditions:

1. Won the fourth prize of the National Science and Technology Progress or Spark Plan or the provincial or ministerial level Science and Technology Progress or Spark Plan The main finishers of projects that have won third prize or above, or the main finishers of projects that have won second prize or above for local (municipal) scientific and technological progress, or the main technical persons in charge of projects that have won provincial or ministerial high-quality products or high-quality projects.

2. Publish more than three professional and technical papers or monographs in newspapers and magazines at or above the municipal level. Those who directly preside over the professional and technical work of medium-sized projects or medium-sized backbone enterprises and have achieved significant benefits for more than two consecutive years.

3. While serving as an assistant, those who have made outstanding achievements and won the title of outstanding entrepreneur or advanced professional and technical worker at the prefectural (municipal) level.

List of Materials

1. "Professional and Technical Position Evaluation Form" (in duplicate for intermediate and junior level), attachment table (in duplicate); the main work performance column in the main form must be Fill in details and specificity.

⒉The "Professional and Technical Personnel Assessment Registration Form" of the previous year.

⒊Professional papers and business work summaries.

Professional paper requirements:

⑴ Must be written in person and no plagiarism is allowed.

⑵ It should be combined with the actual work and position.

⑶The number of words should be no less than 3,000 words.

Business work summary requirements:

⑴ Write down your work experience clearly.

⑵ Clearly write down the main projects you are responsible for or participate in.

⑶ Clearly write down the papers published or the main results and awards achieved.

⑷The number of words should be no less than 1,500 words.

⒋Submit the original graduation certificate and junior professional title certificate for verification.

⒌"Professional and Technical Personnel Proficiency Test Certificate";

⒍Other related materials that can reflect the individual's work ability and important achievements.

⒎6 one-inch color photos, two copies each of ID card and academic certificate.

Applications that do not comply with the above requirements will not be accepted.

Junior Engineer

Master students, if you are initially appointed as an Assistant Engineer upon graduation, you can be rated as Intermediate after 2 years. If you are not initially appointed as an assistant engineer upon graduation, you can be directly appointed as an engineer after 3 years. Therefore, if you make the initial decision as soon as you graduate, you can be evaluated as an engineer one year early.

Intermediate Engineer

Year Requirements

1. Technical secondary school graduates: After one year of internship in the same major or a similar professional position, they can be recognized as

Technicians who have engaged in professional technical work for 4 years can be recognized as assistant engineers.

2. College graduates: After one year of internship in the same major or a similar professional position, you can be recognized as a technician. After another two years of professional and technical work, you can be recognized as an assistant engineer. .

⒊ University graduates: After one year of internship in the same major or a similar professional position, you can

be recognized as an assistant engineer. After another four years of professional and technical work, you can be promoted to an engineer ( Intermediate

level).

⒋ Double bachelor's degree holders can be recognized as assistant engineers, and then engage in professional and technical work for 3 years, and can be promoted to engineers (intermediate).

⒌ Master's degree holders who have worked in the profession for 1.5-3 years can be recognized as engineers (intermediate

level).

Intermediate Engineer Evaluation Principles

Basic qualifications stipulated in the "Trial Regulations on the Positions of Engineering and Technical Personnel":

To hold the position of engineer, one must meet the following conditions:

1. Possess one of the following departments Conditions

⑴Production and technical management department

①Basically master the methods of modern production management and technical management, and have the ability to independently solve relatively complex technical problems.

② Be able to flexibly apply the basic theoretical knowledge and professional technical knowledge of the major, and be familiar with the current situation and development trends of the major at home and abroad.

③Have certain practical experience in production technology management and achieve technical achievements and economic benefits of practical value.

④ Be able to guide the work and study of assistant engineers.

⑵Research and Design Department

①Have the ability to independently undertake research and design work on more complex projects, and be able to solve more complex technical problems within the scope of this major.

② Master the basic theoretical knowledge and professional technical knowledge of the major in a relatively systematic manner, and be familiar with the current situation and development trends of the major at home and abroad.

③Have certain practical experience in engineering technology research and design work, be able to absorb and adopt advanced domestic and foreign technologies, and achieve certain results in improving research and design levels and economic benefits.

④ Be able to guide the work and study of assistant engineers.

2. After obtaining a doctorate and passing the examination; after obtaining a master's degree or a second bachelor's degree, work as an assistant engineer for about two years; after obtaining a bachelor's degree or a bachelor's degree, work as an assistant engineer for four years Above; graduate from college and have worked as an assistant engineer for more than four years.

If the above conditions are met, the unit will apply to the superior authority. When organizing the review, the materials submitted by the review object shall be bound into a volume in the following order (if there are more materials, they can be divided into 2 volumes):

⑴ Catalog of materials;

⑵ 1 academic certificate (copy);

⑶ 1 professional and technical qualification certificate (copy);

⑷ 1 set of letter of appointment (or appointment letter) (continuous during the term);

⑸ Foreign language examination certificate (copy) or "Foreign Language Examination Exemption Review Form" (Attachment 5) or "Foreign Language 1 copy of "Examination Score Approval Form" (attached table);

⑹Computer application ability assessment certificate (copy), those who are exempted from the exam must provide a copy of the computer major graduation certificate or a copy of the ID card for those over 45 years old 1 copy;

⑺ 1 copy of unit transfer document or salary transfer slip (required for transferred units or personnel who are transferred);

⑻ "Exceptional recommendation for high- and intermediate-level professional and technical positions" Approval Form" Approval Form (Attachment) 1 copy;

⑼ Personal professional and technical work summary (printed version) 1 copy;

⑽ Professional and technical personnel assessment form (Public institution personnel are " 1 set of "Annual Assessment Registration Form for Staff of Public Institutions" (annual assessment form for the past two years);

If you want to divide the volumes into the following materials, the binding order is as follows:

⑴Material Catalog (this volume);

⑵ Papers, treatises or research reports (copies). Published papers and treatises should also provide a set of copies of the cover and catalog of the publication;

⑶ 1 set of research results (copy);

⑷ 1 set of project award certificates (copy).

The following materials do not need to be bound:

⑴ 3 copies of "Professional and Technical Position Qualification Evaluation Form" (printing and copying are not allowed);

⑵ "Recommended Engineer Comprehensive Table of Position Qualification Personnel" (Appendix 8) uses B4 specification paper, 25 copies;

⑶ Original foreign language examination certificate, or "Foreign Language Examination Exemption Review Form" or "Foreign Language Examination Score Approval" 1 copy of "Table" (the content is the same as in the bound volume);

⑷ Original copy of the computer application ability assessment certificate, or a copy of the computer major graduation certificate, or 1 copy of the ID card for those over 45 years old;

⑸ 1 copy of the "Exceptional Recommendation Approval Form for Senior and Intermediate Professional and Technical Positions" (the content is the same as in the bound volume);

⑹ If you submit multiple papers or authors, please Choose one article as a representative work and indicate it.

Senior Engineer

⑴Graduate from a university, have been engaged in professional work for more than ten years, and have held an intermediate professional title for more than five years.

⑵Graduate from a college, have been engaged in professional and technical work for more than fifteen years, and have held an intermediate professional title for more than five years.

⑶ Graduated from technical secondary school or high school, engaged in professional and technical work for more than 20 years, and held an intermediate professional title for more than five years.

And you must go to the local human resources department for study and training (lucrehuang)

Anyone who meets the above application conditions must also abide by laws and regulations, have good professional ethics, and be able to perform their duties conscientiously Responsibilities, have made outstanding achievements in this professional position, and have corresponding professional theoretical level and practical work ability; in addition, they generally need to take professional title English and professional title computer exams, and must have relevant papers.

Ⅲ What are the requirements for promotion after undergraduate degree?

1. Basic qualities.

Have a firm political stance, excellent military quality, solid cultural foundation, potential for development, voluntarily dedicate themselves to the cause of national defense, and be a member of the Communist Party of China or an active party member.

2. Academic requirements. Undergraduate graduates are mainly graduates who have taken the unified examination for admission to colleges and universities across the country, been admitted by the first and second batch of admissions offices of the provinces (autonomous regions, municipalities directly under the Central Government, the same below) and have obtained a full-time undergraduate degree and a bachelor's degree ( Including those who enlisted in the army during the graduation year and obtained academic qualifications and degrees during service); they can also take the national unified examination for admission to ordinary colleges and universities, be admitted to the third batch of undergraduates by the provincial admissions office, and obtain full-time undergraduate qualifications and bachelor's degrees (hereinafter referred to as three) Graduates who have performed particularly well during their service.

3. Professional requirements. Male college graduates and soldiers are recommended to have sex with any major. Recommendations for female college graduates to be promoted to soldiers are mainly science and engineering majors, as well as accounting, auditing, financial management, clinical medicine, pharmacy, and biomedical engineering majors. Among them, female college soldiers with non-science and engineering majors who join the army and are engaged in communications majors, and whose scores in the communications major sub-subject assessment are good or above, can be included in the selection of communications majors.

4. Enlistment time. As of June 30, they must have been in the army for more than one and a half years (those who have obtained academic qualifications and degrees during service should have been in the army for more than two years), and have worked in the recommended brigade (regiment) level unit for more than half a year.

5. Realistic performance. Be rated as an outstanding soldier or an advanced individual by a unit at the brigade (regiment) level or above; those who have graduated from three majors should also serve as squad leaders (deputy squad leaders), or be awarded third-class merit or above, or be rated by units at the brigade (regiment) level or above Rated as a model of military training.

6. Age. The age of undergraduate graduate should not exceed 26 years old. Among them, those who have received second-class merit awards or above, those who have been established as major models and commended as heroes and models by units at or above the military region level, and those who are stationed in the national level three or above difficult and remote areas inhabited by ethnic minorities and are ethnic minorities, the age can be relaxed by 1 year .

7. Physical psychology. Physical and mental health, in line with the physical examination and psychological test standards for students recruited into military academies.

Ⅳ What are the conditions for graduating from a university?

I think that in university, it all depends on self-consciousness. Some college students have not learned anything in university. After four or five years, , it went by in a blink of an eye, they haven’t graduated yet, they need to write a graduation thesis when they graduate, and that’s it. There are also diplomas. Some people study seriously in college and have real talents! They also need to take postgraduate and master's exams

Ⅳ What are the requirements for a bachelor's degree after graduating from a university?

Generally speaking, you can get it by completing the credits, passing the final exam, and passing the thesis defense. to diploma and bachelor's degrees.