Use our company's exposed light glue filling machine QQ1205718753
1. Equipment characteristics
The maximum glue output ratio is 100:10=A glue:B glue, the minimum The glue output should be greater than 1 gram, the repetition deviation is less than 0.05, and the maximum deviation is 0.1 gram
II. Product application scope:
a)? This glue filling machine uses a microcomputer to control the glue output. It automatically dispenses glue according to the set ratio value, and adopts an original dynamic mixing structure to achieve high glue dispensing precision and uniform mixing. It has various alarm
reminder functions, is easy to operate and is custom-made with imported materials
durable and reliable. Suitable for various fields that require the filling of two-component epoxy
resin, such as: LED glue-filled exposed lamp strings, LED waterproof modules, waterproof power supplies,,, Application of products such as ,,,
;
3. Product features:
a) Adopt the glue dispensing method combining air pressure and pump, the glue is discharged and air is absorbed
The influence of pressure and liquid viscosity is small, and it eliminates the glue output ratio that is easily caused by a single pneumatic glue filling machine commonly used in the market
Issues of equality.
b) It has a sound and light reminder function for glue shortage alarm. The operator can more conveniently and clearly know the amount of glue and replenish glue in time
water, avoiding the problem of incorrect proportions caused by insufficient ingredients.
c) It adopts an original dynamic mixing head structure (patented technology will be investigated if you imitate it
), which is simple in structure, light in weight and easy to clean
It has functions such as managing and dynamically rotating and stirring AB glue, and is suitable for handheld operation
. And optional single or multi-head glue dispensing heads are available.
d)? Exclusively has the glue blocking reminder function. If the A glue or B glue pipe
is clogged, it will remind you that a certain pipe is clogged, so that it can be discovered
in time and processed in a timely manner, eliminating the problems caused by many glue filling machines on the market
The uneven proportion caused by the pipe blockage is greatly reduced
The economic losses caused by the glue not drying.
e) Use imported air pressure stabilizing device mechanism to ensure that the pressure in the pressure rubber barrel is stable within the set value, and the deviation is less than
±5.
f)? It has a special air pressure balancing device to ensure that the pressure in the pressure barrel of glue A and glue B is exactly the same, eliminating a certain barrel pressure
The problem of imbalanced glue output ratio caused by high or low force.
Four. Composition of the glue filling machine:
Five. Function introduction of the main panel of the glue filling machine:
1. Front of the main machine:
1.1. Air pressure gauge A/B displays the current pressure in the AB glue pressure barrel. The set pressure is 0.2MPA.
1.2. Material shortage alarm A/B, sound and light indicator light, reminding the corresponding
pressure barrel that there is insufficient rubber material.
1.3. Discharging operation A/B, function 1 (after pressing the glue discharging pedal
, under normal glue discharging conditions, the A/B indicator light will flash,
Indicates that the discharging pump is operating normally), function 2 (press the glue discharging pedal
After pressing the glue discharging pedal, the A/B indicator light is always on, indicating the corresponding glue pipe
If it is clogged or over-pressured, please be reminded to deal with it in time).
1.4. Power switch, turn off or on the machine.
1.5. The discharging switch is used to clean the mixing head. After pressing it
the machine automatically outputs separate A glue cleaning.
1.6. Stop stirring and turn off or on the stirring of the mixing head.
1.7. The exhaust switch is used to remove the air in the pipe.
When pressed, A/B glue will be released quickly at the same time. Release the button and
Stop glue dispensing.
1.8. Electric stirring output, connected to the mixing head.
1.9. Switch input, connect the pedal switch to trigger the glue.
1.10. A/B glue output, corresponding A/B glue output,
connect the mixing head.
2. The back of the host:
2.1. Power input terminal, connect to 220V AC mains input
.
2.2. Air source input, compressed air access terminal
(0.3~0.8MPA).
2.3. The air pressure output A/B is connected to the A/B glue pressure barrel air
pressure input end.
2.4. Material limit input A/B, corresponding to the material switch end of A/B glue pressure barrel.
2.5. A/B glue input, corresponding to the glue outlet of the A/B glue pressure barrel
.
3. Side of the host (open the cabinet lock):
3.1. Air pressure regulating valve, rotate to adjust the air pressure
(The pressure gauge shows 0.2MPA), Non-professionals should not make any adjustments
at will.
3.2. A/B glue output controls the amount of glue output
through the rotation of the pump. 3.3. USB interface, used to connect to a computer.
The output glue amount can be set through the computer.
6. The operation process of the glue filling machine:
Check whether the interfaces of the host are correctly connected, turn on the air source,
and turn on the power switchgt;gt; gt; Check whether the host pressure gauge reaches
to 0.2MPA air pressure >> Open the pressure barrel discharge valve
>> Install the mixing core in the mixing head and install the mixing
Tube and dispensing head, and lock them >> Turn on the stirring switch,
Rotate and stir in the mixing tube >> Press the exhaust button to drain
Remove the air in the pipe (just check that there are no bubbles in the pipe, and
check whether the operation indicator light is always on. If a certain indicator light is always on
, the corresponding pipe is blocked. The operation can only be carried out after elimination)
＞＞Press the discharging pedal switch (empty the glue 3 times)＞
＞＞Carry out normal glue filling operation, and press the pedal every time
The switch is used to quantitatively dispense glue once (repeatedly pressing the pedal during the glue dispensing process
is invalid)>>After the operation is completed, press the discharging switch and wait
to stop After the glue is discharged, turn off the stirring >> Remove the mixing tube and the glue discharge head, blow them dry with an air gun, rinse them dry with alcohol, and place them upright for later use. , use cotton swabs or shredded
cloth with alcohol to clean the cavity of the mixing head, place it upright>>Turn off the pressure
Bucket glue outlet valve and air source, turn off the power>> Complete＜＜＜