Toilet hung ceiling
Choose waterproof, anticorrosive and antirust materials.
Toilet floor
Must be waterproof; Ensure that the brick surface has a drainage slope, and the slope faces the floor drain; After laying the tiles on the ground, you must do a closed water experiment for at least 24 hours; When laying floor tiles, pay attention to the joints and alignment with the wall tiles to ensure the overall sense of the whole bathroom.
Toilet wall
The tiles on the wall should also be waterproof to the damp-proof bathroom, and should be flat when pasted, and aligned with the floor tiles to ensure the overall feeling of the wall and the ground; If you meet the outlet of the water supply pipe, the cut of the ceramic tile should be small and appropriate, so that the flange cover on the water feeder can cover the cut and make the appearance perfect.
Toilet doors and windows
It is best to have windows in the bathroom to facilitate ventilation; The door boundary is slightly higher than the inside of the bathroom; The gap between the bathroom door and the ground is larger to facilitate the return air; If it is a sliding door, it is necessary to make a waterproof layer between the sliding door and the bathroom floor tile.
Toilet circuit laying
Tin must be hung at the wire joint, and waterproof glue cloth and insulating tape must be wrapped in turn, and the wire body must be wrapped with flame retardant tube; All switches and sockets should have moisture-proof boxes, and their positions should be based on the size and position of electrical appliances to ensure convenient and reasonable use.
Reconstruction of toilet waterway
It is best not to change the water supply and drainage lines too much. If you want to change it, you should decide according to the specific situation. For example, if the model of washing machine is different, the position of water supply and discharge is different.
Installation of bathroom sanitary ware
Before decoration, it is best to remember the spacing of sewer holes, and choose bathtubs, toilets, toilets, washbasins and other sanitary ware according to the size to avoid inappropriate size during decoration; The installation of the toilet should be sealed with toilet mud first, and then fixed with expansion screws or glass glue, so that the toilet can be repaired if it is blocked.
Toilet ventilation
There must be an exhaust fan, and the exhaust fan must have a reverse door to prevent dirty air from flowing backwards.
Toilet greening
When decorating, you can choose some potted plants that are resistant to shade and like humidity and put them in the bathroom to make them more lively.
A good place for bathroom decoration
Zunyi's superb decoration is better! Their toilet overhead technology has obtained the national patent technology!