When installing, the specifications of the expansion bolts used can be determined according to the theme and weight of the lamps, but the minimum is not less than M6 (mm), the multi-head chandelier is not less than M8 (mm), and the number of bolts is at least 2.
Light self-tapping expansion screws cannot be used.
2. Installation method of ceiling lamp: The ceiling lamp has a round, square or rectangular base (chassis) with different sizes.
The lamp holder can be fixed on the embedded wood block with expansion bolts or wood screws.
If the diameter of the socket base exceeds 100 mm, two screws must be used.
If the lamp holder is installed with embedded bolts and through bolts, the bolt diameter shall not be less than 6mm.
The lamp can be fixed on the base with wood screws, and the number of wood screws should not be less than the number of installation holes given by the lamp.
3. Installation method of wall lamp: According to the structure of the base, the wall lamp can use the base or not.
When using the base, the base should be fixed first, and then the wall lamp should be fixed on the base.
Generally, the bedplate is made of wood, the thickness of which should be greater than 15mm, and the surface is painted with decorative paint.
When the wall lamp is installed, the screws can be screwed into the mounting screw holes of the light box for fixing, or holes can be punched in the wall, wood bricks can be embedded or plastic tube expanding screws can be used for fixing.
Wall lamp base screws are generally not less than 2.
The installation height of the wall lamp is generally 2 ~ 2.2m from the center of the lamp to the ground.
The wall lamp installed at the bedside is 1.2.
~ 1.4m is appropriate.
4, downlight installation method: downlight is embedded lamps, suitable for ceiling.
The basic form of the lamp is cylindrical, and the lamp mouth is a wide-sided metal ring plated with lead, titanium or nickel. After the lamp is installed, it is close to the top surface and has good decoration.
There are two clamp springs on the symmetrical sides of the lamp tube as a device for fixing the downlight.
The opening faces the lamp mouth. Adjust the spacing of snap rings with wing nuts.
National owner decoration exchange group
573032 185