If you need to film, it is recommended that you contact the local service center or specialty store to consult about the purchase and film pasting. You can check the service center information and dealer information through official website.
Should the mobile phone be coated? I want to film it.
Paste the screen even if it is toughened, because there may be sand with hardness higher than steel (especially in time) to wear the screen.
The new machine you buy usually has a disposable plastic film that can be peeled off when you use it. There is no film on the screen of the mobile phone when it leaves the factory, but please rest assured that the screen of the machine has been tested for scratch resistance before leaving the factory to prevent wear. Without film, it will not affect the use within the normal operating range. However, the film can effectively prevent some sharp objects from directly damaging the screen, and you can choose whether to film according to your personal preference. If you need to buy film, it is recommended that you contact the local Samsung service center or Samsung store for consultation and purchase. You can check the service center information and dealer information through Samsung official website.
Should I shoot a new car? Personally, I think it should be filmed.
The function of the glass film can not only block ultraviolet rays and some heat, but also prevent people from being injured by the sudden bursting of the glass.
It is suggested to choose Gu Wei, Dragon Film, 3M and other brand films to ensure the after-sales quality. The manufacturer has a warranty period of at least five years.
AVS70+LATI35 of Dragon Film has good insulation and high cost performance. Jing Rui 70+ Jing Rui 40 of 3M is also the top insulation film in 3M.
hope this helps
Should iPhone 7 be coated? IPhone doesn't need film.
1, the screen hardness of iPhone7 does not need to be coated, and the screen itself is very wear-resistant, so the coating has little effect. 2, if you just stick a normal film, the quality is too poor, and it doesn't match the screen of iPhone7.
3, but the cost of sticking a toughened film or an explosion-proof film is high, but it will not have much effect.
4. For similar mobile phones such as IPhone7, which are high-end products, you can do some cleaning and maintenance on the screen of the mobile phone at any time.
Nowadays, the screens of smart phones are very large, so many people will put a film on them after buying them. Ordinary plastic film is rarely pasted now, and most people paste tempered film.
6. For smart phones. If it is a metal body, you don't wear a mobile phone case. If it is a glass body, you may wear a mobile phone case, on the one hand, to prevent the glass from breaking, on the other hand, the glass is too easy to get fingerprints, or if you don't wear a mobile phone case, you will stick a back film.
Speaking of film pasting, we must first understand the purpose of mobile phone film pasting. The original intention of the mobile phone film is to protect the screen glass from being scratched. Considering that the fine dust in the air is composed of silicon dioxide, which is harder than all glass, it is still necessary. However, considering that the screen glass hardness of iPhone 7 has reached the level of Android thousand yuan machine after many tests. I'd better mail it.
Post it, most of the current mobile phone membranes are tempered membranes, which means that if your mobile phone is accidentally dropped, it will cost tens of dollars at most. Without this protective film, the screen will break. . That's thousands!
Should the windshield be painted? Who suggested that Fuyao sunless solar film can be pasted? Its main functions are: 1, heat preservation and energy saving: heat preservation in summer and heat preservation in winter; Safety and explosion protection: reduce the damage of glass fragments to people; Ultraviolet protection: protect skin, eyes and interior; Reduce glare: drive safely; Privacy protection: line of sight contrast; Personality beauty: aesthetic demand.
I really don't know whether the psv screen should be coated with tempered glass. It's better to stick a film on the screen. ..
Although psv touch screen is not used much, it is difficult to scrape.