How to connect the gas of Qiaojiale gas stove?

First of all, we need to prepare some installation tools, including screwdrivers and hoses. When we are ready, turn the cooker upside down, that is, the back is up. There is a battery on its back. Let's first remove the screws on it with a screwdriver, then open the battery and put it in. But there are also some cookers that don't need batteries. If not, we can skip this step.

2. There will be a joint on the cooker to connect the pipeline for transporting natural gas. First of all, we connect the hose prepared in advance to the joint, and then tighten it with a hoop. Then, we will move the cooker to the stove, connect the other end of the hose just connected to the joint to the outlet of natural gas, and fasten it with iron rings.

3. Finally, install some accessories on the cooker one by one, and then turn the knob to see if you can light the fire. If the fire can be struck and the flame burns normally, then the installation is successful.

How to connect the natural gas stove with natural gas?

1. Determine the placement position of natural gas water heater and natural gas stove in advance and fix it.

Then connect the gas pipeline into the house to the gas meter.

3. Connect a special tee on the gas outlet pipe of the gas meter.

4. Connect the gas pipes of the gas stove and gas water heater from the special tee for gas pipes.

5. Connect the connected gas pipelines to the gas inlets of the gas water heater and gas stove respectively and fasten them.

How to connect the natural gas stove with natural gas?

There are two interfaces on the natural gas stove and the natural gas meter pipeline. According to the distance between your cooker and gas meter, you can connect them with a special pipe of appropriate length, and the two interfaces must be clamped with clips.