Method of setting automatic dialing in Chinese version of ASUS AMM6000EV (applicable in Guangzhou and other regions)
Asus AAM6000EV (new black version)
Asustek AAM6000EV (Annex A/E) and simplified AAM6000EV (Annex A/J) have exactly the same settings, only the appearance is different.
Routing setting method:
1. Enter MODERM first (enter 192. 168. 1 in IE browser. If you can't get in, enter ADSL192.168.1in the gateway.
2. Because MODERM has routing function, there is no need to upgrade BIOS.
Click the "Bridge" option in the above item after entering, and delete all bridges after entering. Click RFC- 1483 Brdiging interface (1483b) option to delete all, then click ATM VC option to delete all, and then click "Add" after deletion.
VC interface: aal5-0
VPI: 8 persons
VCI: 35
Mux type: LLC
Maximum prototype of each AAL5: 2
Fill in according to the above.
Next, press WAN options, click PPP options, and then press Add.
PPP interface: ppp-0
Atm VC: aal5-0
IPF type: public
Status: Start
Protocol: PPPoE
Service name: It doesn't matter whether it is filled in or not.
Use Dhcp: disable
Use DNS: disable
Default route: enabled
security information
Security protocol: PAP
Login name: enter the account provided by the telecommunications bureau.
Password: enter the password provided by the telecommunications bureau.
Fill in the form as above, and then press "Submit".
Click Manage, and then click Submit &; Restart "Click Submit, and then click Restart at last, and it will be OK.
On the PC, we set our IP address to 1 92.168.1.x (x means the number to be filled in, 2 ~ 254 can be filled in at will, but1cannot be filled in, because the default IP address of MODERM is1.
Select DNS configuration, and then enable DNS. The host can fill it in at will, and the DNS server will search in sequence. First fill in the main DNS: 61.144.56.100, press Add, and then fill in DNS: 202.96. 128.68. Ok, restart when you are finished.
(This DNS is the address of the DNS server in Guangzhou. Please consult the local telecommunications bureau in other areas. )
Asustek AAM6000EV (silver gray) and AAM6005HW (milky white) have the same route setting method.
Routing setting method:
1. Enter MODERM first (enter 192. 168. 1 in IE browser. If you can't get in, enter ADSL192.168.1in the gateway.
2. Because MODERM needs to upgrade the BIOS to realize the routing function, it needs to download the MODERM upgrade program from ASUS's website. Please download it here:/products/communication/download.asp.
3. Click the channel under the quick setup wizard on the left, select Delete in the action item, and click Submit to delete the original bridge.
Click the channel under the quick setup wizard on the left, select Add in the action item, select 8 in VPI, select 35 in VCI, select PPPoE routing in service type, and click Submit to enter the setting interface of PPPoE routing.
User name: enter the account provided by the telecommunications bureau.
Password: enter the password provided by the telecommunications bureau.
Confirm password: enter the password provided by the telecommunications bureau.
Service name: It doesn't matter whether it is filled in or not.
PPP startup status: Select startup.
Function: Check two items.
Finally, click Reset MODERM in the options on the left to restart MODERM.
On the PC, we set our IP address to 1 92.168.1.x (x means the number to be filled in, 2 ~ 254 can be filled in at will, but1cannot be filled in, because the default IP address of MODERM is1.
Select DNS configuration, and then enable DNS. The host can fill it in at will, and the DNS server will search in sequence. First fill in the main DNS: 61.144.56.100, press Add, and then fill in DNS: 202.96. 128.68. Ok, restart when you are finished.
(This DNS is the address of the DNS server in Guangzhou. Please consult the local telecommunications bureau in other areas. )
Configuration method of Yitek ADSL modem
RFC 1483 Installation of Bridge Mode
This method is the simplest, suitable for stand-alone PC users, simple and practical, let's start now.
The first step is to install the network card and protocol.
Set the IP address in the TCP/IP attribute of the network card to192.168.1.2 subnet mask: 255.255.0; Gateway to fill in192.168.1; DNS is enabled, and the host will be filled with ... (whatever you want); The domain can be left blank, and the DNS server search order can also be192.168.1.1(actually, it can be left blank).
The second step is to set up ADSL modem.
Open IE, enter 192. 168. 1, then press enter, enter the password 12345 (this is the factory default setting of Yitek ADSL MODEM), select RFC 1483 bridging mode, and fill in the VPI/VCI value. Management IP:192.168.1.1; The subnet mask is: 255.255.255.0; You can leave the default gateway blank and click OK. (Note that you must wait patiently after clicking, and you must wait until all the ADSL lights are turned on and return to normal before you can operate. Generally, you have to wait 1-2 minutes, and it is forbidden to cut off the power! Otherwise it will destroy the program in ADSL modem).
Well, if you follow the instructions and this article strictly, and you are lucky (pretend this% & luckier; *, why not buy lottery tickets? ) Fill in the address in this step and you can surf the Internet. Simple:)
Finally, I want to give you some advice. First of all, when you apply for a telecommunications bureau, you must make clear the nature of the ADSL line you apply for, whether it is a dedicated line or virtual dial-up verification. All kinds of parameters should be recorded, even if the telecommunications bureau helps you install them, you should back them up yourself. Users who pass the virtual dial-up verification will also install virtual dial-up verification software, such as Enternet300 and WinPoET.
RFC 1483 Routing Model (Router Model)
In this mode, the hub in the LAN can be directly connected to the Ethernet port on the ADSL modem. This routing method has the characteristics of saving Internet IP resources (only one Internet IP is needed for the whole LAN), directly enjoying ADSL access without proxy server and convenient maintenance. It is suitable for small and medium-sized enterprises, Internet cafes, home users with various terminal devices and other users who have low requirements on network performance and pay attention to cost performance. But its disadvantage is that the network load is large (such as more than 40 computers), which is not suitable for users with high network security requirements.
The first step is to set up ADSL modem.
Connect ADSL modem to PC for configuration, and connect network card modem with straight-through network cable. Enter the TCP/IP attribute of the network card, and specify the IP as192.168.1.2; Subnet mask 255.255.255.0; Gateway192.168.1.1; DNS is enabled, and the host will fill in: ..... (Pull whatever you want); You don't need to fill in the domain, but also fill in the DNS server search order 192. 168. 1. Restart the computer. After that, open IE, enter 192. 168. 1 to enter the WEB setting screen of ADSL, enter the password (initially 12345), select RFC 1483 routing mode and fill in VPI/VCI in the upper WAN column, and enter the IP column. Fill in192.168.1.1in the IP in the LAN column below. Fill in the subnet mask with 255.255.255.0. DNS IP fill in the value given by the telecommunications bureau (not required). As for RIP on/off and DHCP Server ON, if the IP of each terminal in the LAN is designated as 192. 168. 1. *, you don't need to choose (it is recommended that you specify IP to facilitate management).
The second step is to configure the PC in the LAN.
Ok, now we just need to configure other PC terminals. Install the network card and protocol like the first PC, enter the Network Neighborhood/Properties /TCP/IP properties and fill in 192. 168. 1. * In the IP address (just fill it in), fill in the subnet mask 255.255.255.0; Gateway to fill in192.168.1; DNS is enabled, and the host will fill in: ..... (Pull whatever you want); The domain can be left blank, and the DNS server search order is192.168.1.1.
Pay attention to the LAN when installing, and try again after all the switches are turned on. When ADSL is normal, PWR/LLK/WLK should always be on, and when there is data, LAC (local area network) WAC (wide area network) should be on.
Some ADSL routing setting methods in other places:
Electronic TEK TD-20 18
Set the IP address in the TCP/IP attribute of the network card to 192. 168. 1 .2 (or the IP of the same network segment except192.168.1).
Subnet mask: 255.255.255.0
Change IE and enter: 192. 168. 1 in the address bar. Under normal circumstances, a login box will appear, with the user name left blank and the password: 12345.
After entering the interface, click "ATMPVC Settings" in the options menu on the left, and you can see how many VCS (Virtual Circuits) are enabled in the "Connection List" at the bottom of the page. Generally, "0" and "1" are enabled.
Click "1"VC in the "connection list", and then return to the top of the page. You will see that the "virtual circuit" is "1", then set the "Start" option to "No" and click "Execute" to cancel the "1" virtual circuit.
Then select the "0" virtual circuit in the "connection list" and set its VPI to "8" and VCI to "35" (if the VPI is not good, change it to 0, which is the two values in Tianjin! ), then cancel the "Enable Bridging", select the "PPPOE" option, and fill in the user name and password. The "timeout disconnection" is 0 and the timeout period is 300. Enable "PPP Reconnect to WAN" and click "Go" to complete this setting.
Select NAPT settings, enable NAPT, and then click Go.
Select "LAN IP Settings", with the IP address of192.168.1.1and the mask of 255.255.0.
Select Save Settings, click Save, select Restart, and then click Restart.
At this point, the routing setting is complete. Connect the upstream port of modem and hub with a straight line, or connect the ports of modem and hub with a cross line. In the IP settings of your machine network card, the default gateway is192.168.1.1,the DNS server is 202.99.96.68 (from Tianjin), and the PC and the HUB are connected by a straight line. All settings are complete!
Alcatel SPEED TOUCH 5 15 route setting method:
Open the network in the control panel, and then open the TCP/IP protocol properties of the network card.
Let ip be 1 92.168.1.1(it can also be1to 253);
The subnet mask is 255.255.255.0;
The gateway is192.168.1.254 (factory ip is 5 15).
DNS configuration: write any host name, such as: host, and the DNS search is set to 202.99.96.68.
Then enter192.168.1.254 (Enter) in the address bar of IE browser to enter the ADSL modem Web setting interface.
A warning screen will appear during the input process. Click "Continue" to enter. After entering, click the "Configuration" option in the left navigation menu, and then select the "WAN connection" option after the "Configuration" is expanded.
Record two values of "VPI" and "VCI" in the displayed information. Then delete all the items on the right (above the new service button) (that is, click all delete items, one item, and one less item until all items are deleted);
Click the "Create New Service" button;
Wherein PPPoE routing; Select in the ATM; And DSL configuration item multu (auto) takes precedence;
Click Configure again (a table will appear so that you can enter information and don't write anything not mentioned below), where:
Note: You can call it ADSL at will.
VPI and VCI: Please fill in the two you just remembered!
User name: your account number (usually telephone number)
Password: password
Click Configure again;
Click Save Configuration again;
Finally, click OK, click OK in the dialog box that appears, wait a moment, wait a few seconds until Done appears, and then click Status in the left box;
Click on the name you just named in the description, such as ADSL, which is usually the first one.
The IP address assigned to you by the telecom company will appear in the table on the right. If the IP address is displayed as 0.0.0.0, please wait a moment.
If the IP address is 0.0.0.0 for a long time, the setting is wrong. Need to reset. If connected, you can view DNS data to set DNS on the network card!
If it is 5 1 1, a routing setting software can complete it!
Setting Method of prestige600(642) Routing and Port Mapping in ZyXel
1。 Specify your IP address in the network segment 192. 168. 1. *.
2。 Telnet192.168.1The default password is 1234.
3. Enter the item 1 in the main menu.
RouteIP = yes
RouteIPX = no
Bridge = no
4。 Enter Item 2 of Item 3 in the main menu.
Menu 3.2-TCP/IPandDHCPEthernetSetup
DHCPSetup
DHCP = none
ClientIPPoolStartingAddress = N/A
sizeofclienttippool = N/A
PrimaryDNSServer = not applicable.
SecondaryDNSServer = not applicable.
RemoteDHCPServer = not applicable.
TCP/IPSetup:
IP address =192.168.1.1(this is the IP address of the router).
IPSubnetMask=255.255.255.0
RIPDirection=Both
Version =RIP- 1
Multicast = None
IP policy =
EditIPAlias = no
presentertoconfirmoresctocancel:
PressSpaceBartoToggle。
5。 Enter the main menu item 1 1 item 1.
RouteIP = yes
Bridge = no
Fill in your PPPOE user name and password on the user name and password. Save. okay
6。 Enter 24 items of 1, and the first line will become UP, so you can surf the Internet.
7。 NAT, enter 15, and fill in the IP address of your machine by default ~ (PWS of win98 is not supported. )
Note: Hua Qin is divided into 642 and 642-S, mainly depending on the bottom of the equipment, which is clearly marked. 642-S should be an upgraded version of 642, which supports WEB debugging. User name: admin and password: 1234.
Setting method of Comay Easy Access ADSL built-in dialing (that is, routing mode)
1. First, set the network card address to 192. 168.1.2, the subnet mask to 255.255.0, and the gateway to192.168. 46666
2. Then enter the setting page192.168.1.1,user name: root, password: root.
3. Look at Home-System View -WAN Interface, and find out the interface (eoa-X) and the lower interface (aal5-X) corresponding to the VPI/VCI value (i.e. 0,35 or 8,35) in this area (note: X is any number)!
This step can also be understood as finding the values of eoa and aal5-0,35 or 8,35 corresponding to your office!
4. Click on "Bridge"-delete "EOA-X" (X is the corresponding value you just wrote down).
5. Click "Bridge"-"EOA Configuration"-Delete the corresponding "AAL5-X" (X is the corresponding value you just wrote down).
6. Click WAN -PPP Configuration-Add -Atmvcc and select AAL5-X (X is the corresponding value you just wrote down). By default, enter your phone number and password at the user name and password (by default, the password is your phone number).
7. Click Manage-Submit/Restart-Submit-Restart! (This step is just to save the settings. In fact, after the completion of the sixth step, you can surf the Internet normally. )
D-link 500 route setting method
1. Set the IP address of the network card to10.1.1.2; Subnet mask: 255.0.0.0; Gateway:10.1.1; DNS:202.99.96.68(Win9X restarts and Win2K/XP continues)
2. Open IE and enter: 10. 1. 1 in the address bar. User name and password are both admin (if there is no change! )
3. Click Home-Quick Setup-just select 0 as the highest value.
4. The packaging format should be changed to PPPOE and LLC, and the VPI/VCI value should be filled correctly (generally, the game of Sanqi is 8,35, and other games are 0,35! )
5. Set the bridge option to disable, set the IGMP (as if I can't remember clearly) to enable, and select the router to enable.
6. Setup is complete. You can click WAN-PPP- if Link UP is displayed on the right, congratulations, debugging is successful!
& ltDaya > ADSL Cat route setting method
1. Open the route
TCP/IP protocol settings of network card
1. Right-click My Network Places on the desktop and select Properties from the pop-up menu.
2. After the network dialog box appears, under the "Configuration" tab, select "TCP/IP ..." (the information of the ellipsis here depends on the PC network card), and then click "Properties".
3. The TCP/IP properties window will pop up. In the TCP/IP properties window, select the "Specify IP address" option on the IP address tab. Enter the IP address of the network card, such as192.168.14, and the subnet mask is 255.255.0 (the IP address given here is mainly to keep consistent with the factory address of ADSL, which can be set in the configuration screen as required).
4. Select the Gateway tab as shown in figure C.4, enter the IP address of the gateway 192. 168. 1 (this address is the default address of ADSL), and click Add.
5. Select the DNS Configuration tab, and then select the Enable DNS option. Enter the IP address of the DNS server in the "DNS server search" column, and click "Add" to join.
The above is the setting of WIN9X system, and the WINNT system looks down!
Continued from Step 2: Pop up the TCP/IP properties window, and select the IP address option on the IP address tab in the TCP/IP properties window. Enter the IP address of the network card, such as 192. 168. 1 4, subnet mask 255.255.0, gateway:192.168.
Finally, click OK to return to the network dialog box.
7. Click the "OK" button in the "Network" dialog box to exit (9X system can restart the machine, NT system cannot).
Route setting method suitable for db102 db102-a db102-b db108.
Just set up the network card, open the browser and enter /traditional/article.jsp in the address bar? topic = 10 1 1880