2. Enter the "Enter" key+"OK" key in the lower left corner to enter the administrator mode. Basically, the settings of door locks are all set in this administrator mode.
3. After entering the administrator mode, you will be prompted to enter the administrator password. The initial password here is 123456.
4. After entering the password, you will see four options. Select the "2" option to set up users. After entering the setting user interface, you can see three options. Select the number "1" here to add users.
5. After entering the add user interface, you will see three options of adding password, fingerprint and magnetic card, and select the number "2" to add fingerprint.
6. Enter the fingerprint 30 seconds after adding the fingerprint. Just put the fingerprint you need to enter in the fingerprint area, and finally you will be prompted "Set successfully".
Second, the use of fingerprint lock matters needing attention
1, the administrator information is saved.
When you first start using it, pay attention to setting and managing the administrator's relevant information, because the reset and reset initialization of fingerprint lock during use may be related to it. In the national lock industry market research, we often encounter many consumers' inquiries: "What if I forget the administrator information?" This kind of question is often consulted by consumers. Therefore, the administrator information is very important and should be properly kept.
2. The input information should be standardized.
In the process of inputting fingerprints, don't press hard or lightly, which is not in line with daily use habits. In the process of inputting information, we must use it in the normal way, and try to use it in the way zui is used to, especially the fingerprint lock of the handle fingerprint head, which needs our attention. Otherwise, if the input is unreasonable, it will cause trouble in the use process and lead to a decline in experience.
3. Keep the spare fingerprint input.
Try not to enter just one fingerprint. We recommend entering at least 3-5 fingerprints. Generally, there are more than 20 fingerprints in a fingerprint lock, which is enough for the whole family. A moderate number of entries can effectively prevent the problems of fingerprint invalidation, such as fingerprint damage, peeling, unreasonable entries, etc., and can effectively improve the experience.
4. The password should be a common password as far as possible, and the length should be sufficient.
At present, the password of fingerprint lock is basically an alternate option, which is unlikely to be used. If it is not a common password, it is easy to forget, and once forgotten, it is very troublesome. Therefore, the password must be your usual password, and the length of the password should not be less than six digits, which can prevent the password from being lost and ensure the improvement of security.
5. Pay attention to foreign objects in the fingerprint input window.
This is considered from the perspective of safety. If it is used by a willing heart, it will not have much impact, but good usage habits are very necessary for greater security. Once a foreign object is found in the fingerprint entry device, remove it immediately and reset the fingerprint or password. This is my sense of security.