Schematic diagram of Mercedes-Benz glb interior button (schematic diagram of Mercedes-Benz gla center console button)
Mercedes-Benz GLB central control button icon and car key description
(1) central control button
1. Body Electronic Stability System
The system is turned on by default, and it is generally not recommended to turn it off unless it rains and snows.
2. Parking radar/image
This button turns on the panoramic image and radar function, and can check the surrounding obstacles for the owner through alarm and intuitive feedback.
3. Automatic start and stop
During a short stop, the engine will be turned off. When the driver releases the brake, the vehicle will continue to move forward.
4. Internal/external circulation
The difference between internal circulation and external circulation is that the air of internal circulation is always provided by vehicles, while external circulation allows external/internal circulation to be used in the environment with serious tail gas, dust and smoke when traffic jams occur. When driving at high speed, switch to external circulation ventilation every once in a while to prevent polluted air from causing health problems.
(2) the door key
Mercedes-Benz GLB cab:
① Window lock button
② One-button window lifting control switch
③ Outside rearview mirror adjustment switch (angle adjustment and folding function)
④ Central locking button
(3) Roof button
① sunroof switch
② Main drive reading lamp
③ Co-pilot reading light
④ welcome lamp
⑤ Vehicle lighting
⑥ Information consultation
⑦ Emergency assistance
How to adjust the rearview mirror of Mercedes-Benz glb (how to adjust the rearview mirror of Mercedes-Benz glc)
The rearview mirror of Mercedes-Benz GLB has been adjusted to the armrest of the door. Before adjusting the left and right rearview mirrors, you need to press the left and right rearview mirror selection control buttons first, and then adjust the rearview mirror up, down, left and right. The heating of the rearview mirror has been integrated into the central control button area and combined with the defogging of the rear windshield on a switch. When the corresponding switch is pressed, the windshield and rearview mirror are heated at the same time. Generally, in rainy days, snowy days and foggy days, water or frost on the mirror surface is removed to ensure the clarity of the mirror surface.
The mirror folding button is located at the armrest of the driver's door. Press this switch to stow the rearview mirror. In addition, if you want to lock the car and automatically put away the rearview mirror, you can set up some models.
Correctly adjust the rearview mirror angle:
1. Center rearview mirror
The correct adjustment of the central rearview mirror is of great help to the driver's sight. First, adjust the rearview mirror to be parallel to the horizon, and the position of the horizon is repeated 1/2. Face the driver slightly with the mirror to ensure that you can see directly behind the vehicle.
2. Left rearview mirror
Adjust the horizon to 1/2 in the center of the left rearview mirror, so that the exposed body 1/4 is in the mirror. Also pay attention to the exposure of body image. The body image occupies too much in the rearview mirror, and other vehicles are basically invisible in the rearview mirror. The space occupied by the body image in the rearview mirror is too small to see the cars in the same lane.
3. Right rearview mirror
There is still a pressure on the adjustment of the right rearview mirror. First, adjust the horizon to account for 2/3 of the right rearview mirror, and the body accounts for 1/4 of the rearview mirror.
Illustration of Mercedes-Benz glb Interior Button (Illustration of Mercedes-Benz gla Center Console Button) @20 19