(1) During the preparation, installation and exhibition of the exhibition, the organizer and the venue rental unit * * * shall be responsible for fire safety, establish fire prevention responsibility system, post responsibility system and fire prevention organization, and conduct unified management. Check key parts frequently and take measures to ensure safety.
(2) Woodworking machines such as chainsaws and planers should be operated outdoors. If it must be located indoors, fire prevention work should be strengthened, and waste such as wood shavings and sawdust should be cleaned up in time. In winter construction, fire control management should be strengthened. During painting and painting operations, good ventilation should be maintained.
There shall be no open flames around, and it is forbidden to work in the same place at the same time by gas welding and electric welding. All kinds of flammable dangerous goods such as paints and thinners should be stored in a safe place outside the exhibition area. Forklift trucks and battery trucks should always check whether the brushes and circuits are in good contact. The exhaust pipe of the forklift engine should be equipped with a fire cover and should be parked outside the museum after use. Cars are generally not allowed to enter museums. Fire prevention requirements shall be strictly implemented for electric welding and gas welding operations.
(3) The layout of exhibits such as booths, exhibition boards, exhibition tools and models should adopt circular passages, with the total area of the exhibits not exceeding 1/3 of the exhibition area and the width of the passages not less than 3m.
(4) The length of panels and charts in large exhibition halls shall not exceed 20m, the height shall not exceed 3.5m, and the distance from the back wall shall not be less than 60cm, which is convenient for maintenance and inspection.
(5) Display boards, display cabinets and exhibits should be placed in places where fire hydrants and emergency exits are not blocked, so as to ensure the safe evacuation and fire extinguishing of personnel in case of fire.
(6) The open-air exhibition should have a circular fire lane, and the end fire lane should have a return lane or a return yard, with an area of not less than 15m× 15m. The width of the fire lane shall not be less than 3.5m, and the clear height shall not be less than 4m if there are advertisements and the Arc de Triomphe is erected on the upper part of the road.
(7) Mechanical exhibits, such as diesel locomotives, automobiles, tractors and various gasoline and diesel engines, should be exhibited outdoors, and the fuel in the fuel tank should not exceed the consumption at the time of exhibition and at the time of departure within one day. If it is exhibited indoors, do not operate or maintain it, do not store oil in the fuel tank, and remove the battery.
(8) Flammable, explosive, corrosive, highly toxic, oxidant and other hazardous chemicals shall not be exhibited in kind, but noncombustible, non-dangerous goods and models may be used instead.
(9) The storage of commodities on display should not exceed the sales volume of the day.
(10) booths, exhibition boards, charts and electric models shall be made of combustible materials such as wood; If wooden materials are used, they should be treated with fire prevention. More should not use petrochemical products board.
(1 1) All cotton fabrics such as curtains, decorative ribbons and flags in the exhibition hall should be treated with fire prevention.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd