Self-evaluation of engineering work 1
According to the deployment of the County Quality Revitalization Leading Group Office, our bureau has fully implemented Scientific Outlook on Development, worked creatively and solidly, carefully studied and formulated quality revitalization work plans and plans, implemented various tasks of quality revitalization, established and improved a long-term supervision system for quality revitalization, and aimed at improving the quality and efficiency of enterprise operation. Our county's industrial economy has maintained a good momentum of sustained growth. The annual quality revitalization work is evaluated as follows:
(1) Strengthen organizational leadership and improve institutions.
Timely adjust and set up a quality revitalization work leading group headed by the top leader, with an office under the leading group, which is responsible for the organization, coordination, guidance, supervision and assessment of quality revitalization work. And arrange special personnel to handle daily work. Incorporate quality work into the assessment of responsibility book for management by objectives of bureau cadres. According to internal meetings, study quality work regularly and solve difficult problems in time. At the same time, combined with the actual situation of industrial enterprises, the Work Plan of Gaotai County Bureau of Industry and Information Technology on Printing and Distributing Quality Revitalization (Gaofa [_ _ _] No.35) was formulated and issued, which clarified the guiding ideology, main objectives, work priorities and main measures.
(2) Strengthen work measures and put the work in place.
1. Strengthen supervision, grasp benefits and steadily improve operation quality. Pay close attention to enterprise operation regulation and coordination services, strengthen enterprise operation monitoring and regulation, strengthen follow-up monitoring and visits to key industries and leading enterprises through in-depth enterprise research and on-site office meetings, comprehensively monitor and summarize and analyze economic operation scenarios such as output, sales trend and price changes of major industrial products in the county, and make efforts to coordinate and solve some difficulties and problems such as power supply and raw material supply involved in production and operation. Make full use of the "information platform for government and enterprises", strengthen the guidance and contact with enterprises, timely convey and implement the relevant policies of higher authorities, and coordinate the dispatch of production factors such as water, electricity, coal, oil, gas, transportation and employment, which has effectively promoted the healthy and rapid development of industrial enterprises. Based on the existing enterprises, do a good job in the enterprise growth project, and help enterprises expand production scale, improve economic benefits and rank among listed enterprises through technological transformation, quality improvement, brand strategy and financial support. At present, Bofeng Niu Fei Company, Founder Plastic Company and Hengtai New Energy-saving Building Materials Company have grown into enterprises above designated size, and they have been included in the list of enterprises above designated size, bringing the number of industrial enterprises above designated size in our county to 24, realizing the expansion of industrial economy and the improvement of quality. 1-in August, the county's industrial added value was 690 million yuan, a year-on-year increase of 18.7%. Among them, 24 industrial enterprises above designated size completed an added value of 460 million yuan, a year-on-year increase of 2 1.9%. It is estimated that the industrial added value will be1.28.9 billion yuan in February, up by 23% year-on-year. The added value of industrial enterprises above designated size was 900 million yuan, a year-on-year increase of 25%.
2. Strengthen enterprise services, tap potential, and transform to increase vitality. Do a good job in revitalizing enterprise quality, implement the work, make statistics on economic indicators and industrial products of key industrial enterprises every month, strengthen enterprise economic operation and product quality management, establish enterprise quality files, do a good job in classified guidance, and serve enterprises in a targeted manner. The qualified rate of product quality of key enterprises reached 100%, the qualified rate of product quality of small and medium-sized enterprises reached over 85%, and the coverage rate of product implementation standards reached over 98%. And vigorously guide enterprises to carry out ISO9000, ISO900 1, ISO 14000 quality certification, further strengthen the construction of enterprise quality system, and enhance the competitiveness of products in domestic and foreign markets. At the same time, strengthen policy support, industrial guidance and credit support for enterprises, guide enterprises to carry out technological innovation and technology introduction, speed up the pace of technological transformation of enterprises, pay close attention to the consolidation, improvement and upgrading of industrial products, realize the expansion of industrial economy and quality improvement, and continuously improve the economic benefits of enterprises. A series of new technologies for the industrialization of recycling waste plastic film in farmland produced by Antai Silicon-Plastic Composite Materials Co., Ltd. have been applied for appraisal by relevant departments, among which the three-dimensional pattern of molded combination has been patented.
Self-evaluation of engineering work II
Self-confidence, pragmatism, diligence and optimism are my consistent attitude towards life and my persistent attitude towards life. I firmly believe that through my unremitting efforts, there will be a bright future and I will find my own sunshine.
First, in order to ensure the cooling in summer, the cooling tower has a better cooling effect. Under the arrangement and command of the leader, the packing in the cooling tower was completely removed, and the residue left on the packing was also completely removed. After removing the residue, the filler is restored to its original state, which ensures the cooling effect of the cooling tower in summer. Although it is a bit hard to clean the filler of the cooling tower, it is sweet in bitterness and has taught me how to maintain it.
Second, it is very important to run equipment, make phone calls and patrol. In the process of equipment operation, carefully record the operation situation, and notify the leaders and maintenance in time when problems are found. Leaders and customers make phone calls carefully and make records. The supervisor stipulates to patrol at 8: 40 every day. While I was on patrol, I inspected the whole building carefully. Every time I visited, I found that the light in the customer's office was broken, the faucet in the bathroom was loose and the hose was broken. Replace and repair problems in time and inform the supervisor. Although this small problem will endanger personal safety if it is not replaced and repaired in time. Of course, there are also places that were not found during the inspection. We should constantly evaluate the skills of striving for strength in the future.
3. I learned a lot and learned a lot of anomalies during the leadership training on electricity, water, elevators and fire safety. In this actual drill for people trapped in the elevator, I was actually very nervous and afraid that I had done something wrong. In case of emergency, I can apply what I have learned to practical work, and I can make the right decision calmly.
career objective
In the future, I will devote myself to my work with a brand-new mental state, strive to improve my cultural quality and various work skills, and make due contributions. Work diligently, always remember your responsibilities and obligations, be strict with yourself, and strive to complete the tasks assigned by the leaders at any time. Abide by the company's rules and regulations, do a good job, learn from colleagues, learn from each other's strong points, exchange good work experience with each other and improve together. Get better working results.
Self-evaluation of engineering work 3
In order to deepen the activities of expanding the Year of Environmental Construction, optimize the economic and social development environment to the maximum extent, and promote the sustained and accelerated development of Quanzhou's economy and society, the State Party Committee and the State Government decided to carry out the construction of environmental excellence project in Quanzhou, and issued the Decision on Implementing the Construction of Environmental Excellence Project in Quanzhou on March 65438+ in 2009 (Qiandongnan Dangfa [_ _] No.8, hereinafter referred to as the Decision). Since the launch of the environmental excellence project, the office of the leading group of the state environmental construction year has held a mobilization meeting in time around the decision-making and deployment requirements of the state committee and the state government to mobilize the whole state to study the decision-making information in depth, deeply understand the spirit of the excellence project, do a solid job in all the work in the start-up stage and successfully complete all the tasks in the start-up stage. The scenario assessment of the work is as follows:
I. Ideas for work development
(A) pay attention to improve the ideological understanding, to ensure the ideological unity of merit engineering.
First, carefully study and formulate the "Decision" to ensure that the excellence project is targeted. The development direction of environmental Excellence project is clear, that is, through "five innovations, four standards and three evaluations", Qiandongnan Prefecture will be built into the best development environment in the whole province, central and western regions and even 30 ethnic autonomous prefectures in China. To this end, the Supervision Bureau of the State Commission for Discipline Inspection, the lead unit of the pioneering project, organized personnel to visit the well-known Suzhou Industrial Park and Shanghai caohejing High-tech Zone to inspect the local development environment, conducted comparative research in domestic and foreign enterprises for many times, and carried out the drafting of the Decision in combination with the actual situation in Quanzhou. During the process of drafting the Decision, the main responsible comrades of the State Commission for Discipline Inspection and the State Environmental Construction Year Leading Group repeatedly reported their working ideas to the leaders of the State Party Committee and the State Government, which received great attention and strong support from the main leaders of the State Party Committee and the State Government. After the draft decision was issued, it was discussed in depth in groups at the second plenary session of the ninth National Commission for Discipline Inspection held on June 5438+1October 3 1. After the revision, the opinions of the Party Committee, the government, the Commission for Discipline Inspection, and the state departments were widely solicited, and then submitted to the State Party Committee and the Standing Committee of the State Government for study and implementation. The scientific composition process of decision-making ensures the times, practicability and operability of the excellent project. Second, the dispatching meeting of creating excellent projects was held many times to ensure a unified understanding at the state and county levels. Before the start of the Excellence Project, the Office of the National Leading Group for Environmental Construction identified the first batch of pilot units to carry out pilot tests first; The main responsible comrades of the State Commission for Discipline Inspection have held several briefings and dispatching meetings before the start of the pilot work in the state attended by the main responsible persons of the Supervision Bureau of the County Commission for Discipline Inspection and the first batch of 1 1 state departments.
Solve the essence of the project spirit, further unify thoughts and understanding, and form a strong working force.
(2) Hold a kick-off meeting in time to make overall arrangements for the deployment of Quanzhou Excellence Project.
On March 27th, the State Party Committee and the State Government held the kick-off meeting of Quanzhou Environmental Construction Year and Environmental Excellence Project Development. All the home leaders of the four state teams attended the meeting, and the main leaders of the state Committee made an important speech on the Excellence project and put forward specific work requirements. In order to ensure the high starting point and high standard start of the excellence project, the State Party Committee and the State Government hired nine experts, including Suzhou Industrial Park, Kunshan High-tech Industrial Park, Shanghai caohejing High-tech Zone and China Development Zone Association, to set up an environmental excellence project development advisory group in Qiandongnan, set up an "environmental excellence forum", and invited four experts to "optimize the development environment, Promote the construction of the park-random interviews on Suzhou Industrial Park experience, Suzhou Industrial Park investment practice and experience, regional economic development and investment environment construction, etc., held three expert consultation lectures, collected and sorted out the advanced experience of Suzhou Industrial Park, Kunshan High-tech Industrial Park and other famous parks in the east, and revised more than 300 volumes of "Compilation of Reference Materials for Excellent Projects of Developing Environment in Qiandongnan Prefecture" for leading cadres at all levels to learn from, which improved the importance and necessity of creating a good development environment.
Self-evaluation of engineering work 4
I have been working in the architectural design institute of the group for 20__ years. After a probation period of _ months, I was fortunate to be an employee of this group. Looking back on my work in the past few months, with the support and help of the company leaders and colleagues, I have been strict with myself and completed my work well according to the company's requirements. I would like to express my heartfelt thanks to the leaders and colleagues of the company for giving me an opportunity to show myself. After this period of work and study, my professional skills and ideas have changed a lot. Now I will evaluate my work in the past few months as follows:
First, understanding and learning in the internship stage.
For newly graduated college students, engaging in design work is both an opportunity and a challenge. I am fortunate to be a member of the architectural design institute of _ Group. A few months ago, I adapted to the working environment as soon as possible and integrated into the design institute. With the care, support and help of leaders and colleagues, we will seriously study the knowledge of steel structure design, constantly improve our professional level and accumulate experience. During this period, I mainly studied the Technical Specification for Steel Structure of Light-duty Houses with Portal Frames, the Manual for Steel Structure Design, the Code for Architectural Design and the Code for Structural Design. Abnormal condition is the concept of steel structure design, which has risen from a preliminary understanding to a higher level. In recent months, I have learned to raise engineering quantity, quote engineering quantity and design gantry. After doing these works, my understanding of the design of light steel structure houses has gradually improved, and the connection and design of various components are more comprehensive, economical and reasonable. During this period, I have exercised my patience by handling qualification upgrading documents and sorting out simple materials, and realized the importance of being serious, responsible and careful in doing any work, handling the relationship between colleagues and contacting various departments of the group.
Through continuous study and practice, using the theoretical knowledge learned, we will gradually improve our professional skills and understand the core of design work, and make more contributions to the development of design institutes in line with the corporate slogan of _ Group "advocating perfection, pursuing Excellence, striving for perfection and sparing no effort".
Two, strengthen their own learning, improve the level of professional knowledge
After several months of internship, I realized that my knowledge, skills and experience are still lacking, and I can't take it lightly in my work and study. I want to participate more, keep learning, learn from books, learn from leaders around me, and learn from colleagues, which makes me feel that I have improved. Through continuous study and accumulation, I have gained the necessary design work experience, can treat all work tasks with a correct attitude, love my work, and strive to implement it in practical work. Enterprising to improve their professional quality, strive for enterprising initiative in their work, have a strong sense of professionalism and responsibility, and strive to improve work efficiency and quality.
Three. Existing problems and future efforts
Over the past few months, I have been able to devote myself to my work, love my work and not be afraid of hardship. I have made some achievements, but there are also some problems and shortcomings, mainly as follows:
1. I just stepped into the society and started working. I have no experience. The exception is that design work is hard work. I should study and practice while working. I should think more, read the drawings carefully, understand and be familiar with the design specifications;
2. Sometimes work is lazy and not serious enough, and work efficiency needs to be improved;
3. Our theoretical level, professional knowledge and work experience are still lacking, so we should study and practice harder.
In my future work and study, I am determined to seriously improve my professional knowledge and enhance my sense of responsibility, and contribute to the rapid development of design institutes and the leap-forward development of the company's economy. I think I should try to do:
1. Strengthen study and broaden knowledge. Study hard on professional knowledge and related experience, and consult experienced people such as leaders and colleagues. Strengthen the understanding of the development context and trend of steel structure design, strengthen the understanding and study of the surrounding environment and the development of the same industry, and have a clear understanding of their own advantages and disadvantages;
2. In line with the principle of seeking truth from facts, do your own job without procrastination and enterprising;
3. Abide by the company's internal rules and regulations, safeguard the company's interests, forge ahead to create higher value for the company, and strive to achieve greater work results.
In line with the corporate slogan of _ _ Group "advocating perfection, pursuing Excellence, striving for perfection, and sparing no effort", we adhere to and advocate the corporate reputation spirit of "one family, one mind and one mind", and live up to the concern and help of the company leaders, the strong support and help of colleagues, strengthen study and make more contributions to the development of the group.
I wish _ group a better tomorrow, and the design institute will become stronger and stronger with the development of the group!
Self-evaluation of engineering work 5
_ _ _ was a year when _ _ branches took off, which also made me feel deeply encouraged and spurred when I was working in an ordinary post. Looking back on the past year, I was deeply impressed by my work in _ _, from Lunan Project Department of Southern Double Dispatching Project to djg Project Department of Phase II of Zhongneng, and then to djg Project Department of Phase III of _ _.
First of all, I reviewed and evaluated my work in _ _ _ _ Southern Project Department at the beginning of the year. _ _ _ Southern Project Department is the first project after I joined the work. I work as an electrical instrument technician in the engineering department of the project department. At the beginning of the year, it was a tense stage for the system debugging of the synthesis unit of the South Project Department. Due to the complex control chain system of synthesis device and numerous intelligent instruments, the task of system debugging of electrical instrument specialty is extremely heavy, which is less than one year since I joined the work.
Circuit debugging and interlocking debugging of instrument system are the key and difficult points in instrument construction. Therefore, in order to fully understand and master the debugging methods of instrument system, after work, I humbly learned the methods and precautions of instrument installation and debugging from every master at the scene, actively participated in the installation and debugging of instrument engineering construction, and achieved good results, laying a foundation for successfully completing the technical tasks of synthetic devices and instruments. _ _ _ _ South synthesis plant consists of synthesis gas compressor system, ammonia compressor system, ammonia synthesis compressor system, ammonia synthesis system, refrigeration station system and hydrogen recovery system. There are many control interlocking points between these systems, and the principle is complex, which requires high debugging of instrument wiring. The control system of the whole synthesis unit is divided into Siemens itcc syngas unit monitoring system, esd ammonia unit monitoring system and Zhejiang University central control dcs distributed control system. Among them, the compressor and turbine monitoring system plays an important role in the control system of the whole synthesis unit, so in the system debugging stage, we first focus on debugging the itcc and esd3500 monitoring system, and the 3500 monitoring system mainly monitors and controls the shaft vibration and shaft displacement of the turbine and compressor unit and the turbine speed; In addition, a unique phenomenon of compressor unit is surge, which means that air flows back and forth in the compressor. During surge, the vibration of the compressor rises sharply, which is similar to the huge abnormal sound of asthma patients. If it cannot be effectively controlled, it will cause serious damage to the compressor. The surge state develops very fast, usually within 1-2 seconds, so it needs accurate control algorithm and.
Only the fast control algorithm can achieve effective control, and the surge phenomenon is extremely harmful to the compressor unit, even causing serious accidents. Therefore, in the stage of instrument debugging, the correct detection and accurate control of anti-surge regulation loop system is the key to ensure the normal start-up of compressor unit. In the commissioning stage of Lu Hua synthesis plant system, I cooperated with the commissioning personnel of the owner to conduct many tests on the anti-surge regulation loop system of syngas compressor unit and turbine-turbine unit, and made detailed test records. Secondly, the interlocking control and debugging of various pumps in lubricating oil system and condenser system is another key point of electrical instrument debugging, and the correct interlocking of main and auxiliary pumps of lubricating oil and condensate is also the key to the normal operation of compressor and steam turbine generator set. Therefore, during the system debugging, I analyzed the interlocking schematic diagram designed by the design institute with the construction team to deeply understand the design intention. The abnormality is the interlock between the lubricating oil pressure and the start and stop of the main and auxiliary pumps of lubricating oil, and the interlock of the main and auxiliary pumps of condensate is the key to the normal operation of the whole compressor unit and steam turbine unit. According to the design drawings of Lu Hua synthesis plant, the main pump and auxiliary pump of the original lubricating oil pump and condensate pump are interlocked in the field operation column for field control. In order to better monitor and control the interlock of main and auxiliary pumps in real time and ensure the safe operation of the whole unit, interlock control is added in the instrument control room after consultation with the owner's instrument specialty. After half a month's intense rectification and debugging, the lubricating oil pressure control system, speed regulation system and interlocking self-protection system of the unit have all met the requirements for start-up, which laid a solid foundation for the smooth start-up of Lu Hua synthesis plant.
Djg Phase II Project is the second project after I joined the work. The biggest feature of instrument engineering in djg project is that there are many intelligent regulating valves and switch valves, and there are many switch points in the control room. The instrument construction space is small, the construction period is short, the engineering quantity is large, and the process medium in the bus is mostly flammable and explosive, which puts forward higher requirements for the performance of the regulating valve and the on-off valve, and also puts forward higher requirements for the cleaning, pressure test and leakage test of the regulating valve in our construction unit. In order to better complete the cleaning, pressure test and leakage test of more than 300 control valves, we concentrated on the cleaning, pressure test and leakage test of control valves in the prefabrication yard before installing the control valves. Because most control valves are air-open control valves, it brings many difficulties to the cleaning and degreasing of control valves. After consultation with the technical personnel of the construction team, it was decided to use the air pump to supply the instrument air source (the air source pressure is 0.4mpa), and use the hart communicator to apply 20ma signal to open the control valve, and then clean the control valve after opening. Ensure that the process pipeline installation team can install the regulating valve in time, which speeds up the construction progress; When the reduction workshop of the second phase project started normally, the indoor temperature of the bus was as high as 40 degrees Celsius, which greatly affected the flow measurement accuracy of trichlorosilane and hydrogen feed pipeline (thermal mass flowmeter). In order to improve the measurement accuracy of material flow, after consultation with the owner and supervisor, the intelligent meter head of the thermal mass flowmeter was moved to the outer wall of the bus, and a special sensing cable was connected from the sensor of the thermal mass flowmeter to the meter head through a cable protection tube to avoid the influence of high temperature in the bus. After a period of production and operation in the second reduction workshop, the owner's technology
The staff found that the temperature of silicon gas filtered by vaporized hydrogen dropped after it came out of the connecting pipe between vaporizing chambers and entered the bus chamber, and the normal heat preservation measures could not meet the normal production of products. The owner decided to add electric tracing in trichlorosilane pipeline, and Omron e5cz-r2 intelligent temperature controller was used to control the electric tracing. During each shutdown, the owner shall remove and restore the insulation layer of the corresponding pipeline, wind the electric tracing tape, install the explosion-proof distribution box of the branch pipeline, install the cable protection tube and temperature controller, install the terminal junction box, cable laying, wiring and debugging, and the power supply shall be taken from the explosion-proof main distribution box; At the request of the owner, the electric tracing belt shall be wound on the pipeline. Because the temperature of the pipeline is too high, construction workers are forbidden to touch the high-temperature pipeline with any part of their bodies at work. When fixing the tracing belt and the temperature probe, one person shall fix the tracing belt with mechanical tools such as pliers, and the other two persons shall hold hands at both ends of the tracing pipe and fix the tracing belt with aluminum tape.
The main physical quantities of instrument installation project in the third phase of djg project are: three sets of Honeywell tpsdcs control systems, with more than 70,000 analog points and digital points; Glass fiber reinforced plastic cable bridge 1 10,000 meters, instrument control cable 600,000 meters, pipeline 60,000 meters, intelligent instrument equipment such as regulating valves, flowmeters and transmitters 1 10,000 pieces; Three production lines are constructed at the same time, and the specialties of civil engineering, process piping, heating and ventilation, decoration, electricity and instrumentation are ultra-deep construction. The first production line was delivered to the owner for installation at the end of August, and it was produced at the end of 65438+February. The instrument construction period was very short and the task was extremely heavy. During the third phase construction of 152 central control room, it was found that according to the layout of the instrument covered bridge in the central control room designed by the design institute (white map), the space of the originally designed instrument covered bridge (the densest part is the three-story *** 18 bridge) was too small. If the construction is carried out according to the original design, the installation of instrument bridge and cable laying will not be carried out because the space is too small. Moreover, because the covered bridge is in the suspended ceiling, the site (805) is a class 100,000 clean area, and personnel will not be able to enter the suspended ceiling after the construction is completed, which will bring great difficulties to the maintenance of various instruments in the future. According to the actual site and discussion with the owner, the instrument corridor bridge is changed to a steel platform, and the trough bridge is cancelled. Through the cost analysis and comparison between the original design of FRP trough bridge installation project and the modified instrument steel platform installation project, it is found that the original design total cost is more than 5 million yuan, including the installation cost of more than 900,000 yuan, and the modified total cost is more than 3 million yuan, including the installation cost of more than 2 million yuan (the steel structure material is provided by Party B). This change not only facilitates the installation and construction, but also creates conditions for the laying of instrument control cables, and also brings great convenience to the maintenance of various instruments in the future. Save the owner more than 2 million yuan in total cost and increase the installation cost by more than 1 million yuan.
At this stage, the instrument installation project of the first production line in the third phase of djg project has entered the normal production stage, and the instrument installation project of the second production line has entered the stage of system pressure test and leakage test. For an engineer like me, the challenge has just begun. In my future work, I will try my best to learn new knowledge, sum up experiences and lessons, and meet new challenges with more enthusiasm.
Five self-evaluations of engineering work in 2020;
★ The first five work self-evaluations by the end of 2020
★ Five articles on self-evaluation of production work in 2020
★ Self-evaluation of business work in 2020: 5 articles with 800 words.
★ 5 highlights of employees' work self-evaluation in 2020
★ Five latest self-evaluation articles on work performance in 2020
★ 5 essays on self-summary and self-evaluation of 2020 personal works
★ 2020 personal summaries and 5 self-evaluation essays
★ In 2020, 5 excellent samples of employees' personal self-evaluation were selected.
★ 5 articles on self-evaluation of educational administration in 2020
★ 2020 General Resume Self-evaluation 5 articles