Wei Qing Road, the fourth floor of Zhong Jian Building (next to Linshan Hotel), how many design institutes, professional architectural design companies and Guiyang architectural design companies are there? Looking for Chen Zhuo and Kelly.
What ancient architecture design companies are there in Zhejiang? There are many companies doing ancient buildings in Zhejiang. Depends on which one you need. There are few qualified design institutes with long-term experience. You can learn some specific cases, such as Liujiang Ancient Town and Zhuge Ancient Town of Hanzhong, a visual design research institute. , refer to them more.
There are many ancient architecture design companies in Chongqing. It has become a rising trend to build a tourism complex of characteristic ancient buildings, establish a benign green space system and create a humanistic landscape environment. Yuan Jing Design and Research Institute antique architectural design experts said: Antique architecture, as a product of the combination of ancient architectural art and modern science and technology, inherits the characteristics of beautiful modeling and magnificent momentum of ancient architecture, enhances the resilience and durability of the structure, greatly develops its structural types, and is the perfect integration of modern and ancient technologies.
How many architectural design companies are there in Shijiazhuang? Thank you for visiting Jialin, Mei Jia, Lan Xiang, Changsha, Zhuzhou and Xiangtan, Strong, Weston, Gong Jing and the Great Wall. Many of them are qualified.
Is there an ancient architecture design company in Bazhong? There are many good ones in Bazhong. It is necessary to combine the contemporary reality and realize the dual coordination of commercialization and leisure of ancient buildings. Antique architecture design experts from Yuan Jing Design and Research Institute said: Antique architecture, as a product of the combination of ancient architectural art and modern science and technology, inherits the characteristics of beautiful modeling and magnificent momentum of ancient architecture.
In the design capital, what architectural design companies are there in Shenzhen, Green Pengcheng Design Institute ... many.
Does the architectural design company need customers? Does the architectural design company need customers? Knowledge is ok. First of all, it depends on your college major. If you are not a clothing merchant major, you need to take the budget officer first, and then you are allowed to take the cost officer one year later. Of course, the local regulations are slightly different, and you need to consult the local cost station for details.
Does the architectural design company use SketchUP? It takes about 3-6 hours depending on the complexity.
Basic steps of SKETCHUP modeling:
1, the preparation work before preparing the map.
2. Import CAD files
3. Stretch each floor panel.
4, open the window to open the door (whether to build a window frame, according to the actual situation)
5. Add external components such as balcony (the depth of balcony production depends on the actual situation) and outdoor stairs.
6. Add a page to determine the observation angle positioning of the module.
7. Export to JPG image file to provide architectural pictures for post-processing stage.
First of all, the following preparations must be made before importing CAD:
1. Delete all unnecessary lines and layers in the DWG file according to the actual situation.
note:
(1) During the cleaning process, the advance and retreat relationship of the sketch facade blocks should be fully considered, so as to ensure that the walls needed internally will not be demolished.
② Export CAD graphics. When exporting graphics, you can export the main body and balcony separately as needed. )
2. In the SKETCHUP opening program, select the user setting command in the view, and in the dialog box that appears:
① Select "Unit Form" as "Decimal" mode in the "Set Basic Unit" option.
② In the rendering options, select "Show Outline" to cancel the selection. This operation aims to ensure that the lines in the imported dwg file become thin lines for accurate modeling. (This operation step can also be performed after the dwg file is imported, with the same effect before and after. )
Second, the import of DWG files:
1. Select the File option in the menu, select the Import command, and then select the Import DWG/DXF option in the submenu. After that, the system will automatically pop up a dialog box with an option in the lower right corner. After clicking, a new dialog box will appear. In this dialog box, select the unit as mm (this unit is recommended in this option, and this unit is selected to ensure that the ratio of cad drawings imported from sketchup to drawings in cad is kept as 1: 1, so as to build the model.
2. Then select the dwg file to import and choose the Import command. Cad drawings are automatically imported into sketchup.
Third, the establishment of the model:
First, the processing of importing cad drawings in sketchup:
1. Group the cad drawings imported into sketchup into groups A, B, C and D ... (The planes of each layer are grouped separately, and the imported elevations should also be grouped separately, if any).
2. Take A, B, C, D ... and copy a', B', C', D' ... as a reference. Immediately after the first group a, b, c, d ...
(In order to decompose this group A', B', C', D' ... When you encounter a difficult shape or a graph that is not easy to make during modeling, select the required part from it and stretch it, and put the block formed after stretching into the main model. )
Second, the construction of sketchup model:
1. Wall making
Establish a model on A, B, C, D ... and make full use of the rectangle command to form a plane closed figure on the plane (as long as the plane is closed, the closed part will automatically have a fill color,) so as to stretch the plane to generate an entity. [Plane A (a layer of plane) only plays the role of positioning measurement of modeling dimensions. ]
When stretching the height of the block, you can enter the corresponding height in the data box at the lower right of the model interface under construction, and pay attention to clearly grouping the established models according to actual needs. If there are no special circumstances, the general method is to stretch in layers, and then build blocks, splicing the blocks of each layer up and down. It constitutes the main body of the building.
Make windows
Wall stretching can ignore the problem of window opening. After the block wall is stretched, a window can be opened on the wall. There are different ways to open the window. I am used to moving the edge line of the wall to the edge where the window should be opened, with an A, B, C and D on the top, left and right, and then deleting the redundant parts at both ends of the four lines A, B, C and D, and choosing A, B and C on the wall. )
The window frame is made by using the rectangular command in the elevation to form the plane of the window frame, then stretching it to form windows and grouping them.
Making glass
Glass is made separately for windows on walls with different receding relationships, and combined with corresponding window frame groups to form a new combination, which is convenient for movement and management (it can be made into one layer for management). If it is a multi-layer model, the upper and lower layers of glass are on the same plane in the vertical direction, and a large glass can be made from the top to the bottom (in this case, it is beneficial to the management of glass).
Step 4: manufacturing step
It is suggested to build the steps after modeling on the first floor. After the steps (or outdoor stairs) are completed, they should be made into a component and placed in the corresponding position.
Step 5 build a balcony
Balcony should be made separately from the whole building and grouped to ensure that the balcony is an independent block combination, which is convenient for future transformation.
After the model is completed, observe whether there are any errors in the whole. If you can make changes in phtoshoP, you can also use phtoshoP to trim errors after importing pictures.
Fourth, the material paste:
Open the Material View Browser in View. If we need to apply a material to the model, then we will put the picture of the material in the sketchup material library.
Method: Select the Create button in the Material View Browser dialog box. In the pop-up "Add Material Blend" dialog box, check the "Use Map" option and the system will automatically pop up the "Select Image" dialog box. After finding the material picture you want to apply, click "Open" and select the "Add" command in the folder that pops up automatically. Close this dialog box, and in the Material View browser, In Model will echo the newly added material. Click the pattern of this material, and then click the model with the material you want to paste, and the material will be automatically pasted on the model. If you want to adjust the material scale displayed in the model, just click the material pattern in the model in the Material View browser, and then in the pop-up dialog box, select the left and right expansion packages and the up and down expansion package commands on the right side of the "lock" symbol on the right side of the folder icon, and enter the scale of the data interval, so you can see the change of the material scale relationship attached to the model during adjustment.
V. New page:
1. How to add a page: Select a page in sketchup application and click the "Add Page" command to add a page.
2. Choose the appropriate perspective effect as the page (picture). To create another perspective effect, you need to add a new page. When each page produces a new effect after adjusting the angle or shadow, it should be "updated", otherwise the page will not store the corresponding changes in the page.
Page Update CommandClick the right mouse button on the title of the page, and a drop-down menu will appear, from which you can select the update command.
Next, we will adjust the camera angle effect of the model.
Six, camera Angle Settings:
Setup steps:
1. First, deselect the perspective option in the view to make the model view a top view.
2. Select the "camera position" option in the view, then click the camera position in the top view, click the mouse and stretch in the direction you see. When it reaches the appropriate position, release the mouse at this time, and the system will automatically produce the effect set by the operator, then input the line of sight height (the line of sight height of a person standing is about 1650mm) and select ".
Seven, shadow settings:
1. Find the "Shadow" option in the view, click it, and the "Sun and Shadow Options" dialog box will appear. Check Enable Shadows. Select the following "surface" and "ground" options according to the actual situation. We can check it according to the specific needs.
2. Regarding "date/time", we can make appropriate adjustments according to the aesthetic needs of shadow light. In short, the principle is to let the light hit the building to produce a good lighting effect and serve the building itself.
3. Regarding the adjustment of the light-shade relationship, we can select the following "Diffusion" and "Environment" options and stretch the slider to adjust and change. (The toolbar of shadow settings is in the view >; & gt "Tools" > >; "Shadow")
Note: When adjusting the building without shadow effect, it is best to turn off the shadow display to improve the execution speed.
Eight, sketchup exported to an image file:
Select file >> export >> image in the title bar.
The dialog box (Export Image) will pop up automatically, and you can choose the storage location of the exported image and the file type to be stored. You can also select the Options button, select the appropriate resolution and image quality in the Export Image dialog box, and then click the OK button.
Then click Export, and the image will be automatically saved to the location you want to save in the set format.
Nine, image printing:
Click the image with the right mouse button and select the "Print with ACDSEED" option. The print dialog box will pop up. You can select a printer, click the "Properties" button, and the printer properties dialog box will appear, where you can set the paper size and the display direction of pre-printed pictures on the paper. It can be set, previewed and printed as required.
X. reminder:
When you stretch a volume, you should always remove unnecessary and redundant lines from the surface (when removing lines, you should pay attention to the fact that you must enter the corresponding components of the line (or one of the models) before editing, modifying or deleting the lines). In addition, it should be noted that the deleted lines should not cause any adverse effects on the model, such as less surface deformation and so on. If the line will have a bad influence on the whole model after being cleared, and the line is an unnecessary burdensome line as a whole, then the method of hiding the line in its chunk can be adopted to prevent the line from being displayed.
If the hidden E is a secondary component of a component (or something in the secondary component), then if you want to display this component after hiding, you must also enter the corresponding component of E to change the display. Otherwise, the version will not be displayed.
What are the small and medium-sized architectural design companies in Suzhou? Suzhou chengfa architecture design institute co., ltd
Suzhou Xinyu architecture design co., ltd
Suzhou Jiucheng Urban Architecture Design Co., Ltd.
Suzhou zhongxing huahan architecture design co., ltd
Suzhou Zhangjiagang Tian Hong Architecture Design Co., Ltd.
A lot.