Most indicators fall into four categories:
The bright red indicator light represents a warning, and car buyers should check the common faults before driving.
(2) The light yellow indicator plays the role of early warning information and needs to be solved as soon as possible.
(3) The dark blue indicator plays an advisory role, such as whether to turn on the high beam on the right road.
(4) Emerald indicator is a multifunctional lighting effect, such as width indicator, direction indicator and its approach indicator.
The following is a detailed description of the new Mercedes-Benz C260L indicator light (serial number matching diagram).
4. Clean the level gauge
It means it's time to fill the glass tank with glass water.
5, brake system friction plate
The friction plate is damaged less than the specification, and the actual effect of the brake pedal decreases, so it should be removed and replaced immediately. It must be noted that the friction plates on one shaft should be removed and replaced together.
19, steering lock system software
There is something wrong with the steering system of the car, and the reversing steering wheel will not turn. There is no need to drive a car at this time, which will lead to risks.
2 1, tire inflation working pressure video monitoring system
When the tire working pressure is high or low, the fault indicator will light up. Naturally, it is possible that the information content was not recorded again after the tire change.
3 1, electric pedal parking brake
The indicator light is on, indicating that the brake is put in time, and it will go out by itself after learning to put it down. The indicator light keeps flashing, indicating that the braking force can't stop the car from moving.
32, battery power consumption
The battery is insufficient, but sometimes it can be charged according to the driving time, and the battery should be repaired after a period of time.
48, refrigeration system
In addition to the lack of refrigerant, it is also possible that the fan has a common problem.
49. Anti-lock braking system
The fault light is on, indicating that the anti-lock braking system is invalid at this time. EDS in the electronic differential system will also cause the fault light to light up. At this time, stepping on the brake pedal quickly is likely to lead to uncontrollable personal behaviors such as sideslip.
53. Total gasoline and diesel oil
When the fault light is on, it means that there is little remaining oil. When gasoline and diesel are sufficient, it lights up, indicating that there is a common fault in the gasoline and diesel system software.
57. Engine oil quantity
The oil pressure is too low or the remaining oil quantity is insufficient.
60, motor control driving smooth system software (ESP)
Everything flashes during normal operation, lights up when there is a problem, and lights up when the function is turned off. At this point, extreme practical operation is likely to produce risks such as drift.
62, organic waste gas video monitoring system
It may be that the engine knock leads to insufficient ignition, which can not meet the environmental protection standards in China.