What should I do if the aluminum alloy saw blade often loses its teeth?

First, direct dry cutting or lubrication effect is not enough. If the sawing lubrication is not in place in the sawing process of aluminum cutting machine, the saw blade is easy to get stuck in aluminum during sawing, and the aluminium scrap is not easy to be discharged, which will directly cause the aluminum alloy saw blade to get stuck or lose its teeth. Then, the solution is to increase the fuel injection of cutting fluid to ensure that the saw blade is fully cooled and lubricated.

Second, the saw blade specification is not suitable. If the tooth profile of the aluminum alloy saw blade you choose is too dense, it will cause aluminium scrap to be difficult to discharge, and it is easy to get stuck when cutting. Therefore, when choosing aluminum alloy saw blade, it is necessary to choose the specifications of the saw blade according to the cutting machine and cutting material. If you don't know much, you can directly consult Kunshan Fengjinrui Tool Factory.

Thirdly, if the sawtooth of aluminum alloy saw blade falls off seriously, once it is scrapped, the cutting ability and cutting effect of the saw blade will drop sharply. The cost has also increased. Therefore, under the condition that the tooth loss of aluminum alloy is not serious, grinding and filling can be carried out to realize the utilization of two benefits and effectively reduce the sawing cost of processing enterprises.