Technical disclosure is divided into two parts:
1。 The design department shall make design disclosure to the construction unit and supervision unit. Including design intent, design concept, engineering requirements and so on.
2。 Technical disclosure of the technical director of the construction unit to each team and construction surveyors. Including construction operation procedures, construction technology, quality control objectives, environmental protection and safety construction requirements.
Technical disclosure of interior wall plastering
1. Process flow:
Basic treatment, ash cake nails, steel wire mesh, water wetting, interface agent treatment, water wetting, bottom plastering, plastering and slurry filling.
Secondary lighting
Basic treatment: clean up impurities such as wall plastering, the distance between plastering cakes is not more than 1500, and the wall plastering thickness is controlled at 15, and the maximum thickness is not more than 20. Hang the line vertically, find the square and control the internal and external dimensions of each room.
Check whether there is ash cake on the concrete wall surface and repair the wall surface in time.
Steel wire mesh is hung on the aerated block wall, and when the junction of steel wire mesh and concrete wall is 200 wide, it is fixed with insulating nails, and the spacing is 150 ~ 200. The aerated block wall is fixed with steel nails, watered and wetted, and the interface treatment agent is fully rolled. The surface of the interface treatment agent should be roughened, and it should be cured by spraying water after 24 hours to increase the strength of the interface treatment agent.
Plastering: The wall surface should be watered and wetted the day before bottom ash plastering, and the internal tide surface should be dry, with 1: 3 cement mortar as the base and the surface layer 1: 1: 4 plastering. When the walls of kitchen, bathroom and laundry room are rough, the roots will be compacted and polished at a height of 300 from the ground. After the surface layer is polished with 1: 3 cement mortar, it is brushed vertically with sponge, and the root is cut to 300 meters high. The roots of other inner walls are 200 meters from the ground, and the sponge is used to pull fine hair as the baseboard, and the powder walls are watered and maintained for 3-5 days.
Corners of doors, windows and holes shall be compacted with 1: 2 cement sand, corners shall be sharp, and indoor lintels shall be controlled with 50 lines 1600.
Matters needing attention in construction:
1. The aerated block wall must be fully nailed with steel wire mesh, which is 200mm wide and overlaps with the concrete wall, and fastened with insulating nails.
2. The surface of the interface agent must be rough, and it must be fully rolled without leaving dead angles to avoid the wall surface from hollowing and cracking in the future.
3. Before plastering, the wall must be watered and wet, and the powder wall should be watered and maintained for 3-5 days to avoid the phenomenon of empty sand bulging caused by dehydration of the wall.
4. The size and elevation of door and window corner protectors are correct. In the holes of the two structures, leave no less than 5cm on each side and cut straight with aluminum alloy. The joints of the two construction sites should be smooth.
5. The junction box and switch box should be clean and square.
6. Clean up the site after work, and use floor dust when cleaning.
Quality requirements:
The verticality of the wall is 3 mm.
Flatness 2 mm
Yin and Yang Angle founder 3 mm
Gap size 5 mm
Uniform wall color, consistent color.
What do you study in building construction?
I have learned a lot, and there are dozens of college courses. Sadly, it is impossible to learn thoroughly, such as structure, but how deep you can learn is beyond the reach of graduate students. If you learn deeply, you can go to the design institute, right? Management is empty and you can't learn anything. In civil engineering, theory and practice are closely combined. If you want to enter this industry, you only need someone to take you in and use practice to drive theory. I think it is more difficult to study first and then practice. As for the specific courses, I don't need to say more. They are all set by university disciplines.
What does mathematics mean? Building construction drawings, what do symbols mean?
Is it in your photo?
What does the white line on the construction drawing mean? Is a closed line,
Is the location of the facade after completion. Look at this picture. There should be masonry or stone outside the shear wall.
What does it mean to build Kunming University of Science and Technology for five years?
I come from Gong Kun Architecture. I strongly recommend that you study architecture, but I am a science student. However, architecture does not have high requirements for mathematics, which is only one semester, and it is also high school mathematics knowledge. Very suitable for liberal arts students majoring in science and engineering. There are many liberal arts students in our class! In fact, all buildings have no distinction between arts and sciences. It requires you to have certain painting skills, artistic appreciation and, most importantly, creativity. To tell the truth, liberal arts students may be better than science students in humanities and arts. Third, for employment, construction is better than business management. Moreover, Kunming architecture has been approved, and you can get a bachelor's degree in architecture after graduation, while other schools can only get a bachelor's degree in engineering! Three years after graduating from architecture, you can apply for a first-class registered architect, and five years after graduating from engineering, you can apply for a first-class registered architect. Generally speaking, the strength of architecture undergraduate schools is better than that of engineering.
What is architectural and civil engineering's major in architecture? Is it the owner's intention or something? Five points.
Architectural and civil engineering's professional name is "architectural and civil engineering field", including architecture, municipal engineering and civil engineering. Master of architectural and civil engineering can set up three major disciplines, which is different from academic master. Different majors have different training programs, and training objectives are set according to their respective majors.
What is the subject of architectural engineering technology?
Construction engineering technology is a rough study of all courses in civil engineering for three years. The main courses are: architectural drawing, building materials, building mechanics, building architecture, building structure CAD, reinforced concrete structure, steel structure, soil mechanics and foundation engineering, building engineering survey, building construction technology, high-rise building construction, construction organization design, building engineering cost, engineering construction regulations and supervision.
Employment orientation: Graduates mainly face the infrastructure management departments of construction enterprises, supervision companies and large and medium-sized enterprises and institutions, and are engaged in construction, organization management, project supervision and infrastructure management.
What should I do in my future work after learning architecture?
Zhu Xun China finishing:
1. Design institutes can enter large and medium-sized units or companies, or small studios, firms or workshops.
2. Administrative departments: such as planning and construction departments, construction engineering quality supervision institutions and engineering quality inspection institutions.
3. Real estate development enterprises
4. Enterprises or other units related to construction such as project bidding, project agent construction, project supervision, project cost audit, project consultation and project construction. You can also go to an architecture school as a teacher.
The construction industry really needs some certificates to prove itself, but it is not necessary to cover everything, mainly depending on its own development direction.
The work of design institutes is rather boring and difficult to develop, unless you are very talented in this field, take part in some design competitions and win an award, so that the construction industry can recognize you. It's hard to do this. At present, the key projects in China, such as the Olympic Games, are all international tenders, which are basically adopted by foreign countries.
The so-called yamenkou went into politics, and the salary was dead. The longer you work, the more popular you are. You must improve your interpersonal relationship in order to continue to be promoted. If you are not a leader by the age of 40, it will be your life.
At present, the market of construction enterprises is chaotic, but enterprises with good benefits are still good. If I work hard, it's not a problem to get the qualification of project chief engineer within two or three years. I am. Hehe, if you take the construction engineer exam again, you can be a project manager if you have the opportunity. My position and income are good, and the construction is hard.
If real estate companies want to use good people, they will develop and be treated well.
It is not recommended to set up a company, and it is very tiring to fight less.
I studied construction engineering technology. What do you usually do during your internship?
I mean, are you a junior college or an undergraduate? A junior college is a junior college, and an undergraduate is a generalist. You don't need to practice what you have learned. Practice is to master how to apply theoretical knowledge to practical work. It depends on which unit you are internship in. No matter what you practice, just pay attention to what theoretical knowledge is used to deal with those problems in practical work.
What does architectural and civil engineering mean?
This should be the name given by the larger schools when enrolling students. Our teaching building has set up a separate school of architecture. It is estimated that when I study this major in my sophomore year, I will choose a more specific one.
Architecture is painting the appearance of architecture. As for the stable construction of the structure, it is done by people who specialize in carpentry and touch.
Civil engineering can include roads and bridges, housing construction, transportation, water conservancy and water supply and drainage projects. Even geotechnical engineering counts. To study civil engineering until sophomore year, you should choose a more specific major from the above categories.