Solution: First unscrew the shower head from the steering ball ring, find out the O-ring or similar seal inside and replace it, and then rotate the shower head back to its original position.
2. The joint of shower handle leaks.
Solution: Choose the appropriate shower hose and faucet according to the specifications, and replace its rubber ring for re-installation. First, unscrew the handle of the shower head from the hose with binding pliers. Clean the thread on the handle of the shower head, and apply special glue for water pipes or tie special adhesive tape for water pipes around it. Then screw the shower head back, tighten it, and remove excess adhesive and adhesive tape.
3. There is sand or sediment in the shower head.
Solution: unscrew the shower nozzle and clean it. If necessary, soak the parts in vinegar and scrub them to avoid scratches. If the shower head is adjustable, check the parts carefully for signs of excessive wear. If the rotary handle can't move smoothly, or the internal cam is broken, the whole shower needs to be replaced.
The fine water in the shower head becomes thick and thin.
Solution: Rotate the shower head. If not, use a screwdriver to open the small round cap in the middle of the shower head, open the shower head and rinse it with clear water. You can also brush the shower hole with a toothbrush and then install it again.
Extended data
Matters needing attention in shower cleaning
1. Do not use strong acid when descaling, so as not to corrode the shower surface.
2. Don't wipe the surface of the shower with hard objects such as steel balls to avoid scratching the surface of the faucet.
3. Do not disassemble the shower for maintenance, improper disassembly will damage the appearance and internal structure of the product.
(Refer to Baidu Encyclopedia Shower)