2. During the operation of the rolling mill, it is not allowed to measure the pass and touch the rolls and various rotating parts at the entrance side of the rolling mill. If it is necessary to adjust the inlet guide rail, the rolling mill must be stopped before operation.
3. When the roller needs grinding, special tools must be used to stop the rolling operation. Stand at the pass exit of the rolling mill and grind the hole, with one person grinding the hole and one person supervising.
4. In the rolling process of each unit of the continuous rolling mill, when there is steel sticking, steel running and replacement of import and export guides, the main console must be informed to stop, and the treatment operation can only be carried out after the stop.
5. During normal production, steel rolling workers are not allowed to work with their backs to the rolling line, so as to prevent accidents of steel escaping and personal injury during rolling. In case of steel escaping accident during steel rolling, the steel rolling workers should immediately rush to the site to deal with it, so as to avoid the escaped red steel hitting various pipelines and causing accidents or fires.
6. In the rolling process of the rolling mill, it is forbidden to stand at the exit of the rolling mill and cross the rolling line to prevent accidents.
7. When adjusting the rolling mill, the flat rolling mill adjustment should be stopped, and the vertical rolling mill adjustment should be stopped.
8. When lifting rollers, semi-finished products, steel heads, etc., cooperate with the crown block worker and command the crown block to make accurate gestures, and be careful not to collide with the rolling mill and the main console.
9. In normal production or handling of cooling bed failure accidents, it is forbidden to adjust the machine to measure steel in a large cooling bed.
10. When flying shear is in normal operation, it should be supervised by special personnel, and no one is allowed to get close to it.
1 1. When cleaning the flying shear iron head, the rolling mill must stop rolling, and at the same time, there must be special personnel to monitor it. When lifting the steel head, no one is allowed to stand in the pit of the steel head to prevent the steel head from falling and hurting people.
12. If the flying shear fails, the power supply should be stopped immediately, and relevant personnel should be informed to handle it.
13. In the production operation, the rolling mill operators must dress neatly and button up. It is forbidden to go shirtless in summer and wear cotton-padded clothes in winter.
14. Rolling mill operators are forbidden to rest or chat on the console. They really need to enter the console because of work, and return immediately after treatment.
15. Before the succession, the semi-finished products and hot waste products of this class must be cleaned up and the work site kept clean and tidy.