Straightening the Angle of Yin and Yang: An indispensable part of decoration

Straightening the angle of yin and yang is an essential work in decoration. If the angle of yin and yang is not correct, it will not only affect the appearance, but also lead to the cabinets and furniture can not be placed perfectly, and even need to be reworked, resulting in a waste of time and money. This paper will introduce the skills of straightening the angle of yin and yang to help everyone solve this problem easily.

Measuring internal angle

In order to ensure that the internal angle is straight, we need to play ink lines on both sides when measuring the internal angle and pull out 5 meters for inspection. If the length is less than 5 meters, you need to use the through line for inspection. The straightness of the inner angle should be controlled within 3 mm

Square degree of yang angle

The verticality of the external angle needs to reach 0 error. No matter where it is, it needs to be improved.

Looking for yin-supplementing angle

Some walls have a large deviation in the internal angle. If you simply make a straight line for repair, it may cause the wall to become too thick, thus causing problems such as hollowing and falling off. In order to avoid this situation, the inner angle should be checked first. If the deviation is large, first find out the high place and knock it off, and then straighten the elastic line to ensure that the inner angle is close to 90 degrees.

Use a right-angle measuring ruler

In order to detect the deviation of yin-yang angle conveniently, a multifunctional internal and external right-angle measuring ruler can be used. Generally speaking, the deviation of ordinary plastered wall surface is 4mm, while the deviation of brick surface is 2 mm.