Generally, there is a router with normal internet access at home, but the wireless signal coverage of the router is insufficient, and the signal in some rooms is poor or no signal at all. In this case, you can consider buying another router to amplify the wireless signal through the wireless bridge. The swift wireless router FW300R performs the following wireless bridging:
1. After entering the settings page, click Advanced Settings? ——& gt； ? Wireless settings? ——& gt； ? WDS wireless bridge? , you can open Settings --> WDS Wireless Bridge->; Then click Next on the page.
2. At this point, the system will automatically scan for nearby wireless signals and wait for a few seconds. In the list of scanned wireless signals, select the wireless name of the main router->; And fill in the wireless password of the main router, as shown in the figure below.
3. On the page shown below, set the wireless name and wireless password of Swift fw300r router.
4. According to the page prompts, modify the IP address of the Swift fw300r router LAN port, as shown in the figure below.
5. At this point, some tips will be given in the page. If you confirm, click Finish. If there is something wrong with the wireless parameters, you can click Back to return to the previous page to modify them.
6. Enter the WDS wireless bridge configuration page. At this point, if the page prompts: Connected? , indicating that the setting was successful.