Consultation record answered on July 3, 2022
Alarm for excessive deviation of X-axis motor coordinate system in Guangdu 988 system
Good afternoon, dear! I'm glad to be able to answer your questions. Typing takes a little time. A moment, please. I will give you a complete answer!
Hello, dear, I'm glad to answer your question. Dear, the solution is to shut down for one minute, restart and choose to return manually, send a positive alarm and return to the negative direction, and vice versa!
1, or it may be a knife collision or motor failure. Suggest restarting it. The load of the X-axis servo motor is too high. It may be that the bearing of the X-axis lead screw is damaged, or the lead screw is damaged and the motor belt cannot be moved.
The possibility of system problems is very small, and maintenance is recommended. There are two reasons why drivers are not ready. Turning off the machine tool for one minute and then restarting it is the only solution. First of all, you only need to confirm that the machine tool system is normal, and all alarm numbers are explained.
2. The driver gives an alarm. Troubleshooting alarm steps: emergency stop-CNC power off-machine tool power off-power off-wait 10s to 30s- power on-machine tool power on-emergency stop-press "reset".
I hope my above answers can help you ~
Dear, if your problem has been solved, you can click "End Service" in the upper right corner and get a 1 consultation coupon with 5 stars. If you are free, you can leave a message or ask me questions again.
The problem has not been solved? Come and consult a professional answer ~
Alarm for excessive deviation of X-axis motor coordinate system in Guangdu 988 system
be online
524 1 Answer Master Online Answer
Service guarantee
primary
quick response
Ask questions at once
40,345 people commented on the answering service.
Answer to the point, teacher's attitude is good, professional answer is quick, platform guarantee is patient and earnest, service is good, answer to the point is good, teacher's attitude is good, professional answer is quick, platform guarantee is patient and earnest, and service is good.
Grab the first praise
Share comments
Spindle maintenance _ Free on-site maintenance _ On-site maintenance
Recommended information of spindle worth seeing.
Spindle Maintenance Shanghai Zhuojue specializes in providing imported motorized spindles, motorized spindle maintenance and spindle maintenance services in machining centers for customers all over the country.
Zhuojue Precision Equipment (Shanghai) Advertisement
Custom-made suits are designed at home for free, with national chains and many brands to choose from.
Suit recommendation information worth reading.
National door-to-door design, customized suits, door-to-door measurement, lifetime free after-sales selection of international first-line brand fabrics, 15 days fast delivery.
Wuhan laisimao network science and technology advertisement
Which parameter is reversed in the positive and negative directions of the width 928TA2 x axis?
Digital townlet
Good service attitude.
Hello, dear, I'm glad to answer your question [happy]. By adjusting the positive and negative parameters of the X-axis 1, the positive and negative directions of the X-axis of pro number 928TA2 x are reversed. The direction away from the main axis is positive, and the direction near the main axis is negative. 2. When programming the rear tool holder, all x values are negative. 3. The diameter of tool compensation increases to a positive value, while the diameter decreases to a negative value. I hope this service can help you. You can click on my avatar to follow me, and it is convenient to consult me if you have any questions in the future. I look forward to serving you again. I wish you; Have a happy life and all the best [warmth] [warmth]
2022-09- 19
Number of people served 3077
The wide number system 980tb3i reports that the position deviation of the third shaft motor exceeds the maximum allowable value when it stops.
The account has been cancelled.
Good service attitude.
The reason analysis of the excessive position deviation of the first shaft motor in Guangdu 980tb3i system is generally due to the long-term improper overload use of the machine tool and the failure of regular inspection and maintenance, which leads to the wear of the lead screw or lead screw seat bearing of the moving shaft.
2022-03- 1 1
Number of people served 1058
The coordinate system deviation of X-axis motor in Guangdu 988 system is too large to alarm-seek an answer.
20,234 experts answered
Reply within 5 minutes |10,000 professional interviewees
After reading it, the following is more interesting-
In The Legend of Mi Yue, why did the king of Qin and Mi Fei's concubine Mi Yue stay up late on their wedding night?
0 play
What do you mean by ten taxes in one?
Play 13
Who was the first person in China to win the world table tennis championship? Do you think it's weird?
Rong Guotuan is the first China table tennis player to win the world championship. Table tennis is called the national game in China. China table tennis players have been participating in the Olympic Games for many years.
1 Answer 583 people are watching.
The coordinate system deviation of X-axis motor in Guangdu 988 system is too large to alarm-seek an answer.
20,234 experts answered
Reply within 5 minutes |10,000 professional interviewees
Does the continuous running of CVT gearbox in expressway for 4 or 5 hours affect the transmission?
0 play
World Arthritis Day: There are more than 654.38 billion arthritis patients in China. Is arthritis only for the elderly?
0 play