Introduction of Taiyuan Ring Expressway?

Taiyuan Ring Expressway is 84 kilometers long. The northwest section of expressway around the city starts from Luocheng Interchange, connects with the completed southern transit expressway and the "Taiyuan-Qixian" expressway under construction, and ends at Yangqu Town Interchange and Dayun expressway "Yuanping-Taiyuan", with a total length of 42.2 kilometers. Yimao Zhong Da Consulting made the following introduction to Tai Ring Expressway:

Expressway around Taiyuan-Basic Contents

According to the data of CBI Construction Network, the route of Taiyuan Ring Expressway mainly passes through Luocheng, Shentanggou, South Korea, Xikuang Street, Chaicun, Xiangyangdian, Shangxue Village, Zhaojiashan, Qianshantou and Tuwa in Yangqu Town. The highway adopts all technical standards of expressway, with a design speed of 80km/h and a subgrade width of 24.5m.. Subgrade earthwork is 48,493,730 cubic meters, asphalt pavement is 708 1.600 square meters, 2 extra large bridges, 6 bridges and 6 separation interchanges are built along the line. The estimated total investment of the project is 65.438+0.42 billion yuan, with an average cost of 33.7342 million yuan per kilometer. The construction period is about two years and six months.

Taiyuan Ring Expressway-Bypass Scheme

G200 1 expressway East Ring Road of Taiyuan is from K4KM+459M to 28km+ 129m (Yangqu to Wusu section, two-way), and the pavement maintenance construction is planned to be carried out from April 6, 20 16 to June 6, 20 16. In order to ensure the safety of passing vehicles, traffic control measures from Wusu to Yangqu and Yangqu to Wusu will be closed during the construction period. The notice is as follows:

1. During the construction period, the east ring road toll stations of expressway Changfeng East, Yangjiayu and Zhangzitou East are closed to Xinzhou and Datong, and vehicles can bypass Taiyuan Northwest Ring Expressway.

Second, vehicles heading for Datong from Taijiu Expressway can bypass Taiyuan Northwest Ring Expressway in advance.

3. Vehicles heading for Datong from Beijing-Kunming Expressway and Taichang Expressway via Taiyuan South Ring Expressway bypass Taiyuan Northwest Ring Expressway in advance.

4. Vehicles from Datong to Changzhi can bypass the northwest ring section of Taiyuan Ring Expressway in advance.

Vehicles passing through control and construction sections should pass safely according to traffic signs.

The above is the introduction of Zhong Da Consulting to Tai Ring Expressway. For more information about expressways, please pay attention to the architectural knowledge column of Zhong Da Consulting.

For more exclusive information about the construction industry, please pay attention to the micro-signal of the construction network in real time.

For more information about bid writing and improving the winning rate, click on the bottom customer service for free consultation.