Carving process formula of cement antique brick
The formula of cement antique brick carving mainly includes cement, stones, additives, sand and so on. And they are all very high quality raw materials. Of course, the technology of cement antique carving is very advanced, and now it can be poured with the corresponding mold. You can directly pour the material into a special brick carving mold, then directly press it, and finally you can color it. After the coloring is completed, the cement antique brick can also be trimmed. At present, cement antique bricks are also widely used, especially in some gardens.
Installation method of antique brick carving in Tang Dynasty
1, Tang antique brick carving before construction, should be inspected according to the prescribed procedures. Only after passing the inspection can it be put into use.
2. The quality of brick carving products should meet the standard, otherwise it can't be used. The construction site should be leveled and reinforced, and the foundation bearing capacity should meet the requirements.
3. Inspection, appraisal and debugging shall be carried out in accordance with the Technical Test Regulations for Mechanical Equipment and related regulations. It can only be put into use after passing the acceptance.
4. Set safety warning signs in Tang language at the antique brick carving construction site, and take construction safety protection measures according to seasonal characteristics; The wind speed reaches above level 6, so the construction cannot be carried out. Thunderstorms should be well prevented.
5. In the decoration construction site of ancient buildings, select signal commanders, personnel and hoisting workers with rich hoisting experience to master the operation safety requirements. Workers should have a physical examination before construction. Those who suffer from diseases unsuitable for aerial work shall not arrange aerial work.
6, the operator related certificates, lifting personnel is relatively fixed.
7. When building antique brick carvings in Tang language, we should try to avoid cross-operation. The construction site should be clean and tidy, and the equipment and materials should be placed in the designated location. After the work, the locomotive should be checked and stopped as required, and the power supply should be cut off. We can't leave until we confirm it.
The above is the technical formula of cement antique brick carving that I introduced? How to install antique brick carvings in Tang language? We must use antique brick carving technology to make a good cement formula. Doing this well will not affect the effect and appearance because of the wrong proportion. Of course, if you really want to do something like this, you can also ask a professional master to do it. After all, they are more experienced and our results are more satisfactory.