In order to prevent scratching the ground, don't wear shoes with nails to walk on the plastic floor. If conditions permit, try to put on soft-soled shoes.
3. Cushion is placed between furniture and equipment legs and plastic floor.
The size of the cushion is slightly larger than the size of the base.
4. When cleaning the plastic floor, it is advisable to use a mild neutral cleaner and wipe it with warm water. It is not allowed to clean the floor with strong acid or alkali.
Use organic solvents carefully to treat the floor.
5. Pay attention to avoid hard or sharp instruments falling on the plastic floor to avoid damaging the floor.
6. Gum dirt stuck on the plastic floor can be wrapped in plastic bags, frozen into ice cubes in the refrigerator, then put the ice cubes on the gum, let it cool and harden, and then carefully scrape it off.
7. In order to reduce the wear and tear of the plastic floor surface, prolong the service life of the floor and keep the floor clean and beautiful, it is necessary to carry out thorough cleaning, waxing and maintenance on a regular basis.
Usually 1- once in February.
8. Plastic floors should not be in direct contact with heat sources, and high-temperature items above 60℃, such as electric kettles, should not be placed on the floor.
Discarded cigarette butts, if not completely extinguished, will leave burns on the floor.
9. If ink and oil are spilled on the plastic floor, it should be handled in time. Daily cleaning can use washing powder water and soapy water to remove stains.
When you encounter a stain that is difficult to remove, don't polish it with Baijiesi. You need to find a professional to deal with them in time and clean up the pollution.