2. Submit an application to the power supply station in the power consumption area and wait for the special administrator of the power supply station to investigate;
3. Investigation of special managers of power supply station;
4. Enter the approval process. If approved, the installation of the electric meter will be carried out by the power supply station.
Note: the procedure is not complicated, as long as the application is proper and the documents are legal, they can all pass, and the installation process is very fast, and someone will come to pick them up.
5. If it is not an individual, the procedures are consistent and the materials submitted are different:
(1) application form for residential customers' electricity business; ?
(2) electricity address, main certification materials of property owner/telegraph installation?
Companies and enterprises: industrial and commercial business license, private non-enterprise unit registration certificate, unified social credit code certificate. ?
Social organizations: enterprise legal person license, organization code certificate, etc. ?
Organs, institutions and other organizations: certification documents of superior units (compiling units, competent units, etc.). ); Documents approved by the government and industry authorities for its establishment; Relevant licenses and certificates issued by the government and industry authorities. ?
Individuals: mainly refers to resident ID card, household registration book, military officer's card (active duty), passport, home visit card (Taiwan compatriot's card). ?
(3) the power of attorney of the client and the identity certificate of the agent (handled by the non-property owner in person); ?
(4) Proof of the property right of the electricity address (any of the following a, b and c is enough)?
Property Ownership Certificate; ?
B three certificates are complete: construction land planning permit, construction project planning permit and construction permit; (Other supplementary construction land planning permits)?
Legitimacy certificate issued by major departments at or above district level C (original required)
Extended content: 1. Precautions for safe use of electricity:
(1) Know the main power switch and learn to turn it off in an emergency.
(2) Don't touch or probe the inside of the power socket with your hands or conductive objects (such as metal products such as iron wires, nails and pins).
(3) Don't touch the appliance with wet hands or wipe it with a wet cloth.
(4) Unplug the electrical appliance after use; Don't pull the wire when plugging and unplugging the power plug to prevent the insulation of the wire from being damaged and causing electric shock; The insulation layer of the wire is peeling off, so it is necessary to replace the wire in time or wrap it with insulating tape.
(5) If someone gets an electric shock, try to turn off the power in time; Or use dry wooden sticks and other things to separate the electric shock victim from the charged electrical appliances, and don't save people directly by hand; Younger students should ask adults for help in this situation, and don't handle it by themselves to prevent electric shock.
(6) Do not disassemble or install the power cord, socket and plug at will. Even if it is as simple as installing a light bulb, it should be turned off first and carried out under the guidance of parents.
2, the benefits of using leakage protector
Leakage protector, also known as leakage protection switch, is a new type of electrical safety device. Its main purposes are:
(1) Prevent electric shock accidents caused by leakage of electrical equipment and circuits.
(2) To prevent single-phase electric shock accidents in the process of electricity utilization.
(3) Cut off the single-phase grounding fault in the operation of electrical equipment in time to prevent electrical fire accidents caused by leakage.
3, the main cause of electric shock accident
(1) Lack of electrical safety knowledge, flying kites near high-voltage lines and climbing high-voltage poles to dig out the bird's nest; After the low-voltage overhead line is disconnected, the live wire is continuously connected by hand; Touch the charged body by hand for live wiring at night; Touch the broken rubber knife switch with your hand.
(two) in violation of the operating rules, without taking necessary safety measures, unauthorized connection of lines or electrical equipment; Touch damaged equipment or wires; Wrong installation of live equipment; Electrified lighting; Online maintenance of power tools; Live mobile electrical equipment; Twist a light bulb, etc with wet hands.
(3) The equipment is unqualified and the safety distance is not enough; The grounding resistance of two-wire and one-ground system is too large; The grounding wire is unqualified or disconnected; Insulation damage, exposed wires, etc.
(4) The equipment is in disrepair, the line is blown off by strong wind or the pole is not repaired in time; Rubber breaker bakelite is damaged and not replaced in time; The damage of the motor lead makes the shell charged for a long time; The porcelain bottle is damaged, which makes the phase wire and the pull wire short-circuited, and the equipment shell is charged.
(5) Other accidental reasons, such as walking at night, run into a broken live wire on the ground.
References:
(1) Safe use of electricity _ Baidu Encyclopedia?
(2) Grid service login query
(3) State Grid-Zhejiang Electric Power Company