Therefore, every student should be serious and focused when practicing. Of course, besides learning attitude, the methods and tricks of practice are more important. In this issue, I will introduce some tips for passing the exam at one time, hoping to help the "prospective drivers" who are learning to drive.
Zhuangkao
Xiao Li has been studying "104 1" minivan for 30 hours now. On the morning of June 19, he came to the driving school as scheduled and continued to practice the post-test project. After practicing several times, the coach said that he was a little slow in playing.
Xiao Li told reporters that although he is very aware of the problems in his mind (such as slow direction, it is easy to determine the position of the wheel by the turning angle of the steering wheel, and sometimes it is easy to make mistakes and lead to rod collision. ), he also listened to the coach explain the correct method, but once on the train, he made a "mistake".
Miss Shen studied Santana, and now she is also practicing the post-test project. When reversing in the garage, the position of the vehicle could not be adjusted in time because of the fast speed, resulting in the right rearview mirror knocking down the right telephone pole in front.
Common fault of students: the driving direction is too slow, and the vehicle position can not be correctly judged, and the speed is fast.
Coach corrected: Master Wang, Xiao Li's coach, told the reporter that when taking the exam, the students must slow down as much as possible, and at the same time, the direction should be fast and the movements should be clean and neat. In addition, the principle of "crossing" should be strictly observed when hitting the direction to avoid "rubbing the wheel", which is conducive to correctly judging the vehicle position and wheel direction at any time. Be sure to control the speed. If the speed is slow, you can adjust the position of the vehicle at any time to avoid hitting the telephone pole.
Fixed point slope
In the driving test driving range of a driving school in Beijing, the practice field of fixed-point slope is divided into two slopes, large and small, and some practice cars practice fixed-point slope projects here. The reporter saw that many students have the phenomenon of "sliding cars" to varying degrees. Mr. Wang told reporters that he put out many fires during his first practice.
Common problems of students: the fixed-point parking is not in place, the engine stops during climbing, and the car "slips".
Coach's correction: pay attention to two aspects when going uphill at a fixed point. First, the parking position should be mastered. According to the regulations, the distance from the front bumper of the vehicle to the prescribed parking line shall not exceed 50 cm, otherwise 20 points will be deducted during the examination; The distance from the right side to the sideline shall not exceed 30cm, otherwise 20 points will be deducted. So it is very important to choose the right time to stop. In order to prevent flameout during uphill, it is necessary to practice oil distribution and cooperation, and at the same time grasp the opportunity to release the hand brake, and continue to supply oil slowly after releasing the hand brake. The way to prevent "skidding" is to tighten the handbrake after parking at a fixed point.
Tandem parking
In the training ground of a driving school, there is a long queue waiting to practice driving on the training ground parked sideways. Some students are careful in operation, which will eventually lead to the left (right) or rear exit of the vehicle.
Common fault of students: the timing of returning to the direction is not well grasped.
Coach correction: First of all, we should find a suitable parking spot for side parking, so as to prepare for the next operation of reversing into the warehouse. The next step is to hit the steering wheel in time and then return to the direction in time. If the steering is late, the right car body will go out, and if the steering is early, the left car body will go out. There is another situation, that is, when reversing, you don't pay attention to judging the position of the vehicle, and it is easy for the rear body to fail. In the process of completing the full-side parking course, you should also be quick in hand and eye, and try to slow down.
Limit the speed of the door by width
The test requirement of this project is to set up three width-limiting doors on a 7-meter-wide road, with the spacing of three times the length of the vehicle, 1 door, and the three doors are at the same level, and the two doors are staggered at a vehicle width position. Vehicles are required to pass between the three doors at a speed of not less than 20km/h, and the suspenders on both sides are not allowed to touch. This course is actually to evaluate students' ability to control cars. In practice, many students think that it is a little fast to pass at the speed of 20 km/h when they just practice, and it is easy to rub the hanging rods on both sides.
Common problems of students: insufficient speed when passing through the restricted door, or friction between hanging rods on both sides.
Coach correction: For Santana models, the first thing to note is that when passing through the door, the car is generally placed in the second gear, and the speed is controlled at 20km/h. When the vehicle cab door just passes through the doorpost, it should turn right quickly. When the left corner of the front of the car is aligned with the left pull rod of the next door, it should return to the right direction, and adjust the direction when passing through the door. When crossing the width-limiting door from right to left, when the vehicle cab door has just passed the width-limiting doorpost, make a direction to the left quickly. When the right corner at the front of the vehicle is aligned with the right doorpost of the width-limiting door, make a direction adjustment to cross the width-limiting door.
quarter turn
Teacher Yang has just successfully passed the pile test and started the practice of the road test project. In the right-angle turning project, Mr. Yang always has a small problem and can't finish it smoothly. "When I turn at a right angle, I often rush to hit the direction back and forth, but the car still can't pass the right angle smoothly." Mr. Yang said.
Common fault of students: I didn't grasp the best time to hit the direction and drove too fast.
Coach correction: When the right side of Santana car body is close to the outer right-angle sideline, and the middle of the left and right front door triangular windows is aligned with the inner and outer right-angle lines, the direction will be left first and then right to the end, and the car will pass smoothly when it returns to the right direction.
Examination tips:
1, arrange scientific and reasonable study time.
Some students like to concentrate on their studies in a short time, while others drag the whole process of learning to drive for a long time. In fact, these two practices are not appropriate. Generally speaking, the time spent by car should not be too concentrated, so there is no process of digestion and absorption of what you have learned, and the effect of concentrated practice will not be too good. If you delay learning to drive for too long, it is not conducive to the consolidation of the knowledge you have learned. It's easy to learn this and forget that. There is no step-by-step process. Therefore, students should pay attention to reasonable arrangement of time.
As the summer vacation approaches, a large number of students will enter the driving school again. Since the summer time of students is generally only about 50 days, if you want to get a driver's license in the summer, it is recommended to plan the registration and internship time of driving school in advance.
When taking the road test, fasten your seat belt before getting on the bus.
When you really enter the exam, many small details need students' special attention, otherwise it is very likely that you will "lose big because of small things" and you will not pass the exam smoothly.
In the road test, the first thing to remember after getting on the bus is to fasten your seat belt first. Many students failed in the final exam because they didn't wear their seat belts during the exam. I didn't realize my mistake because I was nervous at that time.
In fact, you must have the consciousness of fastening your seat belt when you get on the bus. Even if you successfully get a driver's license, you should pay attention to leaving the driving school and driving on the road.
3. Adjust the position of rearview mirror and seat.
Whether it is pile test or road test, it is necessary to adjust the rearview mirror and seat of the test vehicle to suit its own position, so as to clearly see the situation of the two sides and rear corner of the vehicle from the rearview mirror. The distance between the height of the seat and the steering wheel should also be adjusted to ensure that the road ahead can be seen clearly during the exam and the vehicle can be controlled correctly and effectively.
4. Avoid taxiing in neutral
Pay special attention to the road test and avoid taxiing in neutral. Always shift the gear to neutral after the vehicle stops.
Try not to wear high heels when taking exams and practicing.
For female students, try not to wear high heels during exams and peacetime practice. Because high heels will affect the driver's feeling of stepping on the accelerator, clutching and braking in the driving process to a certain extent, and ultimately affect the practice effect and test results.