Most indicators fall into four categories:
The bright red indicator light represents danger and should be repaired immediately.
(2) The light yellow indicator light warns that car buyers should deal with common faults as soon as possible.
(3) The dark blue indicator suggests that car buyers should pay attention to hazards, such as whether turning on the high beam will lead to glare of the opposite car.
(4) Emerald indicators are multifunctional lighting effects, such as proximity lights, width indicators and direction indicators.
The following is a detailed description of the new Mercedes-Benz C200L indicator light (serial number matching diagram).
4. Clean the level gauge
The indicator light is on, which means it's time to add cleaning liquid to the window or headlight cleaning equipment.
5. Brake friction plate
It means that the friction plate is seriously damaged and invalid. In order to better avoid the direction deviation during braking, the friction plates of the same shaft are usually removed and replaced at the same time.
19, steering lock system software
The car steering wheel is locked, indicating that there is something wrong with the car steering system. There is no need to drive a car at this time, which will lead to risks.
2 1, tire inflation working pressure video monitoring system
When the tire working pressure is high or low, the fault indicator will light up. Naturally, it is possible that the information content was recorded after the tire was changed.
3 1, electric pedal parking brake
Used to supervise whether the electric brake works in place, release the parking brake, and the indicator light must go out. If the indicator light keeps flashing, you need to brake again, otherwise the car will be on the slope or may slip.
32, battery power consumption
The battery is insufficient, but sometimes it can be charged according to the driving time, and the battery should be repaired after a period of time.
48, refrigeration system
It doesn't necessarily mean that the refrigerant is too high, but it may also mean that the refrigerant is insufficient or the fan is faulty.
49, anti-lock braking (ABS)
When the fault indicator light is on, it means that the anti-lock braking function is invalid when braking. When there is a problem with the electronic differential system, it will also cause the fault indicator light to light up. At this time, the car crushed the brake pads under unexpected circumstances, which is likely to cause sideslip and drift.
53. Total gasoline and diesel oil
The indicator lights up for the first time, indicating that the driver must refuel. If there is a problem with the gasoline and diesel system software, it will also cause the fault indicator light to light up.
57. Engine oil quantity
The oil pressure is too low or the remaining oil quantity is insufficient.
60, motor control driving smooth system software (ESP)
When working, the lighting effect will flash, and it will always be on when it is turned off or there are common faults. The motor-controlled ride comfort system software can effectively ensure the sideslip and drift when the vehicle is limited.
62, organic waste gas video monitoring system
The indicator light may be due to insufficient combustion of gasoline and diesel oil, or it may be a common fault of three-way catalytic converter, which leads to industrial waste gas not meeting the requirements.
Million car purchase subsidy