Liaocheng remote control car sped on the motorway and stopped at a red light. What are the requirements for road traffic?

Motor vehicles running on urban roads must use safety technical conditions such as braking, steering, lighting and stability control in accordance with relevant regulations. Driving a remote-controlled motor vehicle in a motor vehicle lane is a violation of the Road Traffic Safety Law and must be punished.

When a motor vehicle is running, the speed shall not exceed 40 kilometers per hour. When overtaking, you should overtake from the left and use lights; Don't overtake at night, don't exceed the distance of being overtaken. When a motor vehicle stops in front to wait in line or drives slowly, it should pass in turn; Do not overtake. Slow down when driving at intersections, railway crossings, sharp bends, steep slopes, tunnels and short distances. Do not use high beam when driving on roads without central isolation facilities or danger warning flashlights. When overtaking, you should use lights continuously. When there is no street light or traffic signal control, traffic should be guided by signs and markings of low beam or low beam. Pay attention to the situation of the vehicle when overtaking, adjust the speed in time and keep the distance from the vehicle.

Liaocheng remote control car sped on the motorway and stopped at a red light.

On June 365438+1October 3 1 day, Liaocheng, Shandong Province, Ms. Wang found a remote-controlled car driving very fast on the motorway. After discovering the problem, Ms. Wang immediately slowed down and found that someone was driving a remote control car, which was very dangerous.

When there is no traffic signal control, it should pass in turn.

You should slow down the steering wheel before turning. When turning, you should turn ahead to remind the preceding car to go first. When turning, it shall not interfere with the normal running of the vehicle being turned. When turning, it shall not interfere with the normal turning of the turned vehicle; You should stop and wait in turn when you meet the stop light. The stop signal is sent from the intersection center when there is no traffic signal to control the intersection, such as the station; When passing, there are vehicles and pedestrians waiting to pass outside the stop line at the intersection. If the road is not in the parking line after parking due to unfinished traffic, you should stop and wait in turn. If you need to continue driving, you should continue to push forward until the intersection returns to normal.