At 360, the post-function Daquan-Yes-File Recovery-Scan → Check the file to be recovered → Recover the selected file (don't recover in the same partition where he lost the file, but recover to the E disk if he lost it in the D disk).
All the files that once existed may be restored, depending on the degree of writing data to the partition after deleting them.
Therefore, do not write data to your partition before recovery.
Linux system:
It seems that there is a data recovery called Das, which can recover ext2, ext3 and ext4 file systems.
Problem 2: Files are lost during cutting. How can I get it back? I won't lose it. Cutting simply stores these files in the clipboard temporarily, then reads them from the clipboard when pasting and writes them to the destination folder. At this point, if the target folder exists and the file renamed by the cut file will prompt that the target folder already has a file with the same name, and give corresponding information for comparison, such as file size, whether the request is replaced or cancelled, and if it is replaced, the file will be gone. However, if you copy other files or text while cutting a file, the file you just cut will still be in the folder, which means it has not been moved. If you can't find the original location, you can use Easyrecovery software to find it.
After opening Easyrecovery, there is a data recovery. You can use Advanced Recovery or Delete Recovery in the next section to scan the original address of the file. However, it is best not to put any new content on the disk where the original file is located. (Because Easyrecovery is recovered by searching the disk, when you put a new file on the disk, it may overwrite the original storage location, so you can't find it back. )
Question 3: The cut and paste things are gone, and how to recover them can only depend on data recovery.
Data recovery software includes EasyRecovery and super hard disk data recovery software.
Take the super hard disk data recovery software as an example:
1. Select "Restore Deleted Files" to cut the lost data, as shown:
2. Select the P symbol where the missing file is located, as shown in the figure below, and click Next to wait for the scan to complete.
3. Check the missing files in the scanning results and click "Start Recovery", as shown in the following figure:
(You can choose the path of the recovery file yourself. )
Ps: The possibility of successful recovery of lost data caused by general shear movement is extremely low. If the data is very important, you need to go to a professional data recovery center.
When running the above software, you need to quit all antivirus software.
Question 4: If the document is cut and cancelled, it will be gone. How to save it? 1. Click the "Restore" button on the common toolbar (on the right side of the "Undo" button), and there is a drop-down arrow on the right side of the button to specify which restore step.
2. The shortcut key for undo is "Ctrl+z" and the shortcut key for restore is "Ctrl+y".
Question 5: Can files that have not been pasted after cutting be restored? It is reasonable to say that it was not pasted after cutting, and the file should still be in its original place. If it is really gone, try to delete the file recovery software! The cut file will be saved in the system cache, and it should be on the clipboard. You can try to search the file name in the system.
Question 6: How to restore a Word document after cutting and saving it? If you accidentally overwrite the file, first check whether "Quick Save" is selected in the Save tab of the Options submenu under the Tools menu of Word, which is not selected by default. Only on this premise can you continue the following operations. Otherwise, there's no way to fix it.
After selecting "Quick Save", after opening a Word file, if you edit the file and then execute the save command, the system will automatically generate a series of hidden files named ~WRLXXXX.tmp (where x is a number), which is actually a backup before we open the file and can be opened directly in Word.
There will be many files ~WRLXXXX.tmp in the directory, and these temporary backup files are arranged in chronological order. Just open the last one. Open the last number of ~WRLXXXX.tmp file, and then save it, and the overwritten original file can be restored.
Question: How to recover the files in the win7 system document library after cutting? The system will put the file selected by the user into the clipboard, and when the user performs the "paste" operation, the file in the clipboard will be placed in the location selected by the user. After the cutting operation, the file in the original position is deleted by the system and cannot be seen by the user. Clipboard is a dynamic space provided by computer memory, which is used to temporarily store data. It's in memory and can't be seen on the computer hard disk. The way the operating system handles cut files is similar to deleting files, so users can restore cut files by deleting files. The "Error Delete Recovery" function of MiniTool data recovery tool can recover the cut files. (MiniTool data recovery tool) This software is free and has no plug-ins. You can also download it in the "Software Management" of QQ Computer Manager. ) 1. Visit the official website of MiniTool data recovery tool, download and install minitool data recovery tool on the computer. Please note that you can't download and install software on the desktop because you need to restore files cut in the operating system. It is recommended to install it on another disk, and then select the recovery module of "false recovery". 2. scan disk c.3. After scanning, the software will display all files deleted from drive C ... and then restore them. Detailed operation, I suggest you go to Software official website to get the corresponding video tutorial. By the way, they also have online technicians on official website. You can also consult them.
Question 8: How to retrieve the original file after cutting and deleting the folder and not pasting it? Use final data or easyrcovery to recover, but the file header cannot be recovered, because you have deleted the file header information and can only recover the following files.
In addition, you are sure that data was not written to the disk before recovery. If it is done, it may have covered the original part and it is impossible to restore it.
good luck
Question 9: I forgot to paste the file after cutting it, and then the file disappeared. What should I do? Only data recovery can be performed.
Data recovery software includes EasyRecovery and super hard disk data recovery software.
Take the super hard disk data recovery software as an example:
1. Select "Restore Deleted Files" to cut the lost data, as shown:
2. Select the P symbol where the missing file is located, as shown in the figure below, and click Next to wait for the scan to complete.
3. Check the missing files in the scanning results and click "Start Recovery", as shown in the following figure:
(You can choose the path of the recovery file yourself. )
Ps: The possibility of successful recovery of lost data caused by general shear movement is extremely low. If the data is very important, you need to go to a professional data recovery center.
When running the above software, you need to quit all antivirus software.
Question 10: Can the lost video files be recovered after being cut on the computer? There is little hope. Try it with the attached software and do whatever you want.
Data recovery naturally depends on personality, some can't be scanned at all, and some are scanned but restored to error files. Restoring a file requires that the partition where the file is located has not been read or written destructively. Your desktop belongs to the partition of the C disk system, and data exchange is frequent. It is likely that the file information was washed away and scanned, which is equivalent to covering another layer of information, and the recovery probability is pitiful.
Be careful not to put files on the system disk in the future, and the chances of recovery can be greater.