There are many density boards in the market for finished wardrobes, and the price is relatively low if you choose density boards for customized wardrobes. There are three kinds of density board: high density board, medium density board and low density board. In the process of customization, a lot of glue is needed. If there is too much glue, it is certainly not environmentally friendly, and it may be moldy, damp and deformed in a few years.
Therefore, no matter how tight the economic situation at home is, it is not recommended to customize the wardrobe with MDF, which is a waste of money. At that time, it was good to customize everywhere, and various problems appeared a few years later.
2. Particleboard
Particleboard is the most widely used board in custom-made wardrobe, and many people also call it solid wood particleboard or particleboard. And there is not only one kind of board, domestic and imported. Of course, imported boards are also expensive, and imported boards such as Iger Board and kronos State are well-known.
Domestic particleboard is generally E 1, and imported is F4 Star. So in the long run, it is recommended to choose imported particle board, which is very good.
3, multilayer solid wood
The waterproof effect of multi-layer solid wood is better than that of particleboard custom wardrobe, so it is recommended to use multi-layer solid wood for custom cabinets, which is more prone to deformation when using wardrobes. As for environmental protection, custom wardrobes are made of glue, which is not very environmentally friendly. Similarly, choosing a brand with high reputation is more durable, although I felt distressed when I paid at that time, and I will never regret it in the future.
4. Solid wood
Custom-made solid wood wardrobes are several times more expensive than other boards, but the prices of different kinds of wood are different, such as teak, Brazilian rosewood and red oak. One thing to remind you is that some masters only use solid wood on the surface of cabinets in order to save materials, and the partition inside may be made of other materials such as MDF, so be careful not to be cheated.
Extended data
Matters needing attention
1, there must be more than 3 drawers.
Customization of wardrobes usually requires extra charge and money, so many people will save money. As long as there is a 1-2 wardrobe, they will find that the drawers in the original wardrobe are too practical to hold underwear, socks and some important documents. At that time, only two drawers were needed for customization, which was not enough at all. There are too many small things to put down, and now they are all full, so don't save them when customizing the wardrobe.
2. Don't make the clothes rail too high.
The clothes rail in the wardrobe depends on the height. If there are short people at home, it is recommended not to make the clothes rail very high, otherwise you can only hang clothes on your toes and take clothes in the future, which is really painful. The installation height of clothes rail should be the owner's height plus 20 cm. The distance from the upper edge of the clothes rail to the top plate of the cabinet is 40mm to 60mm. ..
3. Don't make sliding doors in the wardrobe.
Many people think that the wardrobe sliding door is very space-saving, in fact, the sliding door is very inconvenient. If there are clothes in it that are not folded, they will get stuck and can't be pulled. When in use, only one side of the door can be opened and the other side can be opened at the same time, which is more convenient than opening the door. In addition, the guide rail at the bottom of the sliding door is very easy to accumulate dust, so I think it is better to open the door.