The specific steps to check the condition of the car are as follows: check whether the documents are complete; Look at the degree of appearance loss; Look at the engine wear; Check the tightness of the engine cover; Check the engine compartment for oil leakage, etc. See the condition of used cars for specific steps: 1. Check whether the file is complete. If the certificate is not standardized, it is likely to be a stolen car or a black car. Be sure to confirm the body number and engine number carefully before buying a car. 2. Look at the degree of appearance loss. Specific tricks: stand in front of the car, around the car, left and right, choose a place with enough optical fiber, and observe the car at 45, so that you can not only see whether there are scratches on the car body, but also find out whether there are hidden dark spots that are difficult to detect. 3. Look at the wear of the engine. When checking the engine, be sure to turn on the hood switch in the engine room so that the engine is in the starting state for inspection. The sound of a normal engine should be smooth and deep. If there is harsh noise, there is something wrong with the engine. 4. Check the tightness of the hood, carefully check whether it is consistent with the tightness of the fender or the gap left between the cover and the left and right louvers, whether the hood and headlights are cut unevenly together, whether the gap between the hood and the windshield is consistent or whether the glue of the original car is left. If the rubber seal around the windshield is new, it means that the windshield of this car has been broken. 5. Check the engine compartment for oil leakage. To judge whether a used car has had an accident, it is necessary to carefully check the engine cover, and it is also necessary for the engine to leak oil. It is possible that the engine temperature is too high in summer, and the oil seal and rubber gasket are easy to age, which leads to the decline of sealing performance and oil leakage. If the fastening screw expands with heat and contracts with cold, the fastening force will be uneven, and the slider will loosen and leak oil. The most important point may be that the internal parts of the engine are deformed due to the impact and impact of external forces, resulting in oil leakage from the engine.
Million car purchase subsidy