Omega watches will not disappear because of water. How to solve it?

Hello, when water enters the watch, there is water mist or water droplets on the mirror surface of the watch. After a long time, it will corrode the action, leading to inaccurate walking or not walking. Therefore, the earlier the water enters the watch, the less damage will be caused to the movement. The recommended treatment methods are as follows:

Method 1: Place air holes-first dry the watch with a dry paper towel, and then place it in a cool and dry air hole for several hours. Please don't expose the watch directly to the sun or dry it. This is to prevent water mist from entering the movement.

Method 2: Silica gel drying-For the inlet water of mechanical instruments, you can use granular substances of silica gel to absorb water, put it in a closed container, and then take it out after a few hours, and the water mist inside will be cleaned up; If you watch in time, you can take some small pieces of calcium chloride, wrap it in gauze, then open the electronic watch cover and seal it.

Method 3: Degreasing and derusting-Method 1 and Method 2 can only remove slight water mist, but for some cases of serious water inflow, both of them take effect earlier and there is not enough time for the rescue of the movement. At this time, it is best to find a professional watch maintenance center for crude oil maintenance and grease treatment.