Fuzhou section
Fuzhou section of expressway, Fu Guang is Fuyong expressway. The starting point is the Bay Bridge of Nanyu Town, Minhou County, Fuzhou City, and the end point is the junction of Tongguan Village, Wu Tong Town, Yongtai County, Fuzhou City and Xianyou County, Putian City.
Putian section
"Fu (State) Guang (State) expressway of Shenhai Double Track has been included in Haixi expressway Network, adopting the new two-way four-lane expressway standard." A person from the expressway office in Putian said that the Putian section of expressway, Fu Guang is 49.62 kilometers long, starting from Wuxing Village, Youyang Town, Xianyou County, and ending at Tongguan (the junction of Yongtai and Xianyou) in expressway (previously reported by this newspaper, it is expected to be completed in 201/kloc-0), crossing "Putian-Yongding" expressway to the south, and then with "" The total project cost is about 4.21100 million yuan. According to reports, the Putian section of expressway, Fu Guang will strive to complete the examination and approval of the "Work Permit" by the end of this year, with the construction started on 20 10 and completed on 20 13. After the full line of 20 13 is opened to traffic, Xianyou can go directly to Yongtai and Fuzhou, and it takes only 1 more hours for Xianyou to reach Fuzhou, saving 1 more hours than at present.
Quanzhou section
The groundbreaking ceremony of Changtai section in expressway, Fu Guang was held in Lintun, Changtai. This is another expressway started in Changtai after the Zhangzhou section of Xiamen-Chengdu Expressway started in Changtai, and it is also the 10 expressway started in our province this year.
The expressway, which started this time, is 26.3 kilometers long, starting from Meigong, Changtai County at the junction of Xiamen and Zhangzhou, and connecting with Xiamen section of expressway, Fu Guang. The destination is Anxia, Sean Town, Changtai County, and it is connected with Zhangzhou Section of Xiamen-Chengdu Expressway through Sean Hub Interchange.
The road design scheme shows that the starting point is 14 km, the main line is built according to the standard of two-way four lanes, the design speed is 100 km/h, the overall subgrade width is 26 meters, and the separated subgrade width is 13 meters; 14 km to the finish line shall be constructed according to the two-way six-lane standard, with the design speed of 100 km/h, the overall subgrade width of 33.5 m, and the separated subgrade width of16.75 m. Forest pier interchange and Yanxi interchange are set up along the line, and Keshan junction interchange is reserved.
The above is the introduction of Zhong Da Consulting to Fu Guang Expressway. For more information about expressways, please pay attention to the architectural knowledge column of Zhong Da Consulting.
For more exclusive information about the construction industry, please pay attention to the micro-signal of the construction network in real time.
For more information about bid writing and improving the winning rate, click on the bottom customer service for free consultation.