In today's social life, the frequency of job responsibilities is gradually increasing. Job responsibilities can clarify what everyone's job responsibilities are, what kind of work they should undertake, what kind of responsibilities they should undertake, how to do better, what they should not do, and so on. Presumably, many people are worried about how to formulate job responsibilities. The following are the job responsibilities of the central control personnel I have compiled for you. Welcome to read the collection.
Responsibilities of the central controller 1 1. Familiar with automation equipment, strictly abide by the operating rules of automation equipment, and strictly implement the technical indicators of workshop products as required; Ensure that the products produced meet customer requirements;
Second, the personnel in the central control room must stick to their posts 24 hours a day, pay close attention to the running status of the mechanical system and all monitoring equipment, and patrol the batching platform (pot) every 30 minutes or make an announcement by voice. It is forbidden to string posts and take off posts; Offenders are fined;
Three, the personnel on duty must arrive 20 minutes in advance, fill in the central control room on duty record registration form, completes the handover record, the handover record must be timely, accurate, detailed, complete and clear;
Four, prevent all outsiders from entering the central control room, and never allow non-computer room personnel to operate various instruments and related equipment; Offenders shall be held accountable for the personnel on duty;
5. It is forbidden to talk loudly, fight, sleep, smoke, eat (drink), play mobile phones, listen to music, play games and other things unrelated to work in the central control room;
Six, in the process of duty once found abnormal situation or received an urgent notice, must immediately rushed to the scene, on-site investigation; When an accident or potential threat is found, it must be reported to the workshop leader immediately, emergency measures should be taken, and detailed records should be made afterwards;
Seven, maintenance of all electrical equipment monitoring center, pay attention to maintenance, such as equipment failure or hidden danger, should promptly report the situation to the leadership, and explain the reasons; At the same time, assist in maintenance and make records of troubleshooting;
Eight, it is forbidden to shut down the monitor and ingredients electronic instruments without authorization; At the same time, the maintenance records, production records and monitoring records of all kinds of equipment in the central control room should be properly kept for future reference;
Nine, it is forbidden to use power supply and electromagnetic equipment in the central control room, especially it is not allowed to connect any equipment (including electronic equipment) to the power socket of electronic batching instruments;
Ten, must maintain the health of the central control room, before coming off work, the central controller must thoroughly clean the central control room; Require clean equipment, clean ground and dust-free glass.
Responsibilities of the central controller 2 1. Strictly abide by the rules and regulations of Jining Zibung Resin Co., Ltd. ..
2. The personnel on duty must arrive at their posts ten minutes in advance, conscientiously implement the handover system, be responsible for monitoring the records of the situation, fill in the registration of duty records in the central control room, and make a good handover record, which must be timely, accurate, detailed, complete and clear;
3, the personnel on duty must stick to their posts 24 hours a day, keep a close eye on the running status of adjacent systems, and it is forbidden to leave without leave;
4. Strictly abide by the equipment operation procedures, and be responsible for the operation of alarm facilities and process index monitoring facilities;
5, pay attention to maintenance, maintenance of all equipment in the central control room, such as equipment failure, timely contact with relevant departments, explain the situation, assist in maintenance, and carefully record the fault handling;
6. Keep the automatic recording and monitoring video data of all kinds of alarm equipment in the central control room for future reference, and strictly abide by the confidentiality discipline of the fire control room;
7. It is forbidden to turn off the monitor or use it for other purposes without authorization;
8. Maintain indoor hygiene and clean the central control room before coming off work;
9. Complete the work temporarily assigned by the leader.
Responsibilities of the central controller 3 1. Strictly abide by the rules and regulations of the operation area, obey the work arrangement and command of the shift supervisor and the competent department, do all the work of the class, strictly implement the handover system, and make various records as required.
Second, be familiar with the production process and related operating procedures of the whole plant, and keep in mind the various process parameters of the system.
Third, stick to your post and don't walk around without authorization. Pay attention to the operation of the equipment in this system during work, so as to find problems and solve them in time.
Four, study hard business technology, study hard the knowledge of mineral powder production process, constantly sum up and accumulate experience, improve the operation level.
Five, strictly implement the safety operation procedures of the central control room, strengthen the awareness of safety precautions, it is forbidden to operate illegally, and put an end to accidents.
Six, the operator in the process of operation should keep in touch with the relevant personnel at any time, found that the fault should be promptly notified and cooperate with the processing. And do a good job in operation, operation and other related records.
Seven, in case of emergency or major failure should actively take effective emergency measures, and promptly notify the shift supervisor.
Eight, according to the production quality control parameters issued by the production department to control the operation of this system, to ensure the stability and accuracy of the parameters.
Nine, master the central control system and field workstation. Methods of data acquisition and information transmission.
X. The personnel on duty must truthfully fill in the handover record of central control operation, and carefully fill in the production and operation status, fault causes and treatment results of the class. Untreated or unfinished, it should be explained in detail to the successor and put forward the points for attention.
Eleven, must clean the central control room before succession, keep the central control room clean and tidy.
Responsibilities of the central controller 4 First, fire protection:
1, responsible for the inspection, management and operation of various fire-fighting equipment and facilities in shopping malls.
2, responsible for confirming the fire alarm, alarm should be in accordance with the requirements of the specification to take on-site verification measures and emergency fire extinguishing measures.
3. Be responsible for monitoring the monitoring parts of the mall, timely understand and report the safety situation, and make corresponding treatment.
4. Keep and use the keys of relevant parts of the mall in strict accordance with the spare key management regulations and safety requirements.
5, responsible for reporting all kinds of monitoring facilities reflect the fire safety and public security issues.
6. The personnel in the central control room are responsible for the fire inspection in the internal area of the mall, including the key fire prevention parts.
7, responsible for the daily work of the central control room, responsible for reflecting the fault status of all kinds of monitoring facilities to the relevant departments, special circumstances are decided by the department.
8, responsible for internal use of security walkie-talkie battery charging and walkie-talkie, battery and other items of handover.
Second, monitoring:
1, loyal to their duties, dedicated, conscientious, vigilant and meticulous.
2. Strictly abide by the company's rules and regulations and obey management.
3, must stick to their posts during the duty, without the permission of the superior leadership, it is forbidden to take off the post, string post.
4. Be able to skillfully operate all kinds of indoor equipment and strictly implement working procedures.
5. Be familiar with the setting position and protection range of various probes and monitors, and be able to timely and accurately judge various signals.
6. During TV monitoring, pay close attention to the screen, concentrate on observation in strict accordance with the prescribed time and scope, record and video abnormal suspicious situations, and report to the superior supervisor in time.
7. The scope of TV monitoring, the recording time and the protection time of other security facilities are confidential matters, and it is forbidden to spread news. Without the consent of the superior, it is forbidden to introduce the monitoring situation to irrelevant personnel.
8. Keep the room clean, take good care of all kinds of equipment, check the cleanliness and working condition of the equipment every day, and test the system regularly to ensure that the equipment is always in good working condition.
9. Complete other tasks assigned by the security supervisor.
Central controller 5 1 job responsibilities, conscientiously implement the instructions and regulations of superiors on fire safety work.
2, familiar with and master the performance of fire fighting equipment, to ensure that the fire fighting process is accurate, rapid and orderly. At the same time, according to the fire plan for emergency treatment, and report to the relevant leaders.
3, completes the fire duty record and handover procedures, dealing with fire and telephone.
4, succession on time, the record on duty, equipment condition, accident treatment and key handover clearly, there is no handover procedures, the personnel on duty are not allowed to leave without authorization.
5. Smoking, sleeping, reading newspapers and leaving work in the control center are not allowed during the duty, and the consent of the monitor must be obtained.
6, familiar with the operating procedures of monitoring equipment system, strictly implement the operating procedures. If any abnormality or fault of monitoring equipment is found, it shall be reported to the monitor immediately, and it shall not be tampered with without authorization. At the same time, the Notice of Application for Repair should be filled in and recorded.
7, the attendant pay close attention to the suspicious situation found on the screen, should immediately take fixed-point video, promptly notify the security guard to quickly arrive at the scene for inspection, and make a record of feedback information, and report to the leadership at the same time.
8. Surveillance videos must be arranged in groups and in order, and the video position cannot be adjusted without authorization. If it is necessary to view videos due to work reasons, the Notice of Video Access and Preservation should be filled in and implemented after being signed by the leaders. And make detailed records.
9, the personnel on duty is responsible for the control center equipped with fire extinguishers and other equipment should be properly kept.
10, do a good job of succession. During the shift change, the successor shall be informed of the shift records or pictures that should be paid attention to, and the successor shall check whether the equipment is in good condition, and at the same time check its cleanliness and key collection records.
1 1. Complete other tasks assigned by leaders on time.
Responsibilities of the central controller 6 1. When taking over, listen carefully to the report of the successor and check the duty record. If you are not clear, ask in person and supplement the record.
2, check the equipment, confirm the normal operation of the equipment (alarm, alarm computer, monitor, linkage, etc. There is no doubt that you can take over.
3, according to the fire center duty system, the personnel on duty should stick to their posts, two people in each class, 24 hours on duty, two people exchange positions every hour, the personnel on duty should cooperate with each other, not AWOL, if there is any problem, report it in time and handle it properly.
4, the fire equipment and facilities, patrol inspection six times a day, to conduct a comprehensive and detailed inspection, to ensure that the equipment in good condition and make records.
5, familiar with the location of the center line of various departments, shopping mall structure, evacuation exits, exit location, quantity, especially the location of key departments, and their exit location, order of magnitude characteristics to be familiar with.
6. Skillfully operate fire alarm equipment, security monitoring equipment, related linkage equipment and field control equipment, skillfully use all kinds of fire fighting equipment, fire fighting equipment, escape facilities and rescue equipment, and be familiar with the requirements, characteristics and prescribed time limit of equipment use.
7, familiar with and master all kinds of fire characteristics and common sense, familiar with the contents and operating procedures of fire accident plan disposal.
8, when security monitoring found abnormal, immediately report to the security department and the relevant personnel of this department, and make detailed records.
9. When a fire alarm occurs, the personnel on duty will rush to the scene with tools, lighting equipment, communication equipment and fire fighting equipment.
The time from receiving the alarm to reaching the most unfavorable point at the scene shall not exceed 3~5 minutes, and the alarm situation shall be recorded in detail.
10. If equipment failure is found during work, it should be reported to repair immediately, and the repair time and results should be recorded.
1 1. The fire center is a key department in the central line, and outsiders are not allowed to enter. If it is necessary for work, it must be approved by the security manager in advance and properly registered.
12, any work content of the fire center shall not be publicized, and the monitoring content shall not be watched by outsiders. If necessary, it should be approved by the security manager or the leader above the center line.
14, fill in the duty record carefully, and the handwriting should be clear and neat.
Job responsibilities of the central controller. The attendant should be familiar with the basic principles and functions of various equipment in the central control room, master the operation skills skillfully, and be responsible for the monitoring and operation of the equipment.
Second, the central control room implements a 24-hour duty system. The personnel on duty must strictly abide by the duty system, concentrate on their work, be clear-headed, be quick-witted, and quickly and seriously confirm and handle every alarm.
Third, seriously study professional knowledge, master the correct operation methods of various equipment in the central control room and the use of fire extinguishers, which can effectively organize on-site personnel to put out the initial fire.
Four, familiar with the park building structure, layout and key parts, check the alarm quickly and accurately, not by experience. Strictly abide by the management regulations of the central control room during work, and fill in the work log of the central control room carefully and truthfully.
Five, keep abreast of the operation of all kinds of equipment in the central control room, actively cooperate with engineering and technical personnel for repair and maintenance, and shall not dismantle, misappropriate or stop using it without authorization, and always maintain the normal operation of all kinds of facilities.
Six, the personnel on duty have no right to lend any mechanical and communication equipment in the computer room, and the mechanical equipment equipped in the computer room should be used with care. Non-duty personnel are not allowed to operate machinery and equipment at will.
Seven, according to the arrangement of the security department, actively cooperate with the supervisor to do a good job of monthly fire safety inspection, timely discover and eliminate all kinds of security risks.
Eight, strictly abide by the succession system, the successor shall not leave before the arrival of the successor, the successor should carefully check the working condition of the equipment, and the successor should truthfully explain the working condition of the class.
Nine, complete other work temporarily assigned by the superior leadership.
Responsibilities of the central controller 8 The responsibilities of the personnel on duty in the campus central control room mainly include fire safety monitoring, video monitoring, campus security patrol, and key management of the college building. In order to ensure the orderly and effective development of all the work, the duties of the personnel on duty are now specified as follows:
1. Be responsible for the duty of the central control room on campus, answer the alarm call on campus duty, report to the relevant leaders immediately in case of emergency and do a good job in the early stage.
2, responsible for monitoring the fire monitoring host, found that the alarm should be timely and reasonable disposal.
3. Be responsible for the basic inspection and testing of fire fighting equipment and facilities in the college to ensure normal operation, and fill in the work record carefully.
4, responsible for monitoring video surveillance images, suspicious or major events, fires, etc. Should be handled and reported in time.
5, responsible for video surveillance video inspection work, found that the equipment and facilities can't run normally, to fill in the duty record and repair report in time.
6, responsible for the simple maintenance of video surveillance equipment and facilities, fill in the maintenance records.
7, responsible for campus security patrol work, timely correct the behavior that affects the campus security order.
8. Responsible for completing the safety inspection of campus buildings, switching teaching areas on time, and doing a good job in the management of college spare keys.
9. Be responsible for participating in the security work of large-scale activities organized by the college.
10, responsible for the property preservation and indoor and outdoor cleaning of the central control room on campus.
1 1. Assist the security department to equip the newly built, rebuilt and expanded building facilities with fire-fighting equipment and facilities, and assist in the filing of fire safety work files.
12, assist the security department or public security organ to investigate and collect evidence on relevant public security cases and fire accidents.
13. Assist in completing the safety education and emergency escape drills organized by the college.
14, earnestly study and implement the relevant safety laws and regulations, strictly abide by the operating procedures, and conscientiously complete the work.
15. Complete other safety tasks assigned by the leaders of the security department.
;