Meiguo
Wang professional production
Waterborne epoxy resin
Waterborne epoxy floor paint
Waterborne epoxy floor paint is a product with high value, high quality and high requirements. Proper use can make the floor
Changbao
As a new one, you can
Changbao
Service life. Specific suggestions are as follows:
1、
flat ground
After the construction is completed, it needs to be cured for 7- 10 days before it can be put into use. During curing, water or other solutions should be avoided from penetrating into the surface.
2. All employees entering the workshop must put on rubber-soled shoes (black-soled shoes with foam soles are not allowed) (to avoid bringing sand outside into the workshop and scratching the ground).
3. All hardware such as iron chairs, iron tables and iron shelves must be wrapped with soft plastic and rubber or padded with paper to avoid scratching the ground during use.
4, tractor pulling needs the whole machine.
Half liter
When leaving the ground, please pay special attention to the corners of the machine plate when turning to avoid scratching the ground.
Please use soft absorbent when cleaning the floor.
mop
Or a wet and dry vacuum cleaner, which can be cleaned with clean water or detergent, but please pay attention to the wet ground.
6. If it is worn or scratched due to long-term use, it can be repaired in a small area. If the area is large, it is recommended to repair it again.
Roller coloring method
once
7, before the equipment into the factory, on the floor with a cardboard box at the bottom, in order to avoid
transportation equipment
Start from scratch in this process.
8. cart,
Platform railway freight car
Please use hard or elastic rubber tires for wheels, and use them separately inside and outside the factory.
9, according to the requirements of the ground.
wax
Treatment (its effect can prevent the ground from being scratched)