Often waste plastics contain a lot of silica gel, rubber, adhesive tape and dust, which will greatly affect the recycling of waste plastics. First, a silica gel separator can be used for screening and purification. Silica gel separator is a device that uses elasticity and friction to separate part of silica gel rubber from waste plastics. Pure physical separation, environmental protection and no pressure, simple operation, one person can work, once through the machine, silica gel, rubber and other impurities can be separated at the same time to get clean plastic.
Comparison of clean plastics and waste plastics after classification.
Silica gel separator
Clean waste plastics can be sorted out. At this time, plastic electrostatic sorter can also be used for sorting, such as ABS/PS submerged PP/ flame retardant PS, PET, PVC, PE, PA and other materials. After classification, the value of waste plastics can be better improved.
The plastic electrostatic separator is a device for separating 2-5 kinds of different kinds of mixed plastics by electrostatic method by using the electrostatic difference generated by the friction of different kinds of plastics, which is suitable for all kinds of mixed plastics that are difficult to separate by density flotation. The single separation purity of waste and broken plastics can reach more than 95%, the second and third separation can be close to 99%, and the separation speed is also fast, reaching 1-3 tons/hour (there should not be too much powder in the broken materials).
Plastic electrostatic separator
Waste plastics are recycled after classification and purification, which greatly increases the economic value of plastics and reduces the impact of waste plastics on our environment.