Reverse warehousing skills:
1, right dumping
The first step is to drive the vehicle to the designated position at the front end of the lane, about 2 meters away from the left line, to ensure that the vehicle is parallel to the dotted line and closely together.
The second step is to start dumping the repository. Put in reverse gear and turn on the left turn signal, lift the clutch lightly to make the car start to back up, and control the speed. When you see that the right corner of the garage is aligned with the middle of the lower edge of the right rear triangular window, quickly kill the steering wheel to the right.
Pay attention to the right rearview mirror after the steering wheel is killed. After the right front corner of the garage is exposed, adjust the distance between the car body and the corner of the garage by about 30 cm. If it is less than 30cm, adjust the steering wheel by half a turn. Otherwise, if it exceeds 30 cm, continue to kill to the right.
Step three, move backwards. When you see the whole left line parallel to the body in the left rearview mirror, turn back to the steering wheel immediately. Observe the rearview mirrors on both sides, straighten the car body, see clearly the distance between the car body and the left and right sides, and adjust the direction.
Step 4, pay attention to the left rearview mirror, stop when the rear wheel is about 30 cm away from the bottom line, stop when the winding is close to the lower edge of the left rearview mirror, and finish the right winding.
2. Turn left to the library.
Step 1: After the right library is completed, move to the new library and start to complete the left library. Leaving the warehouse means that when the front of the car is close to the white line and is about to touch the white line, quickly kill the steering wheel to the left and then stop at the designated position.
Step 2, observe the car with a mirror to determine whether the car body is parallel to the dotted line on the right. After observation, when the rear of the car is in a straight line with the left line of the garage, reverse the gear and kill to the left.
Step 3: When you see the car body parallel to the garage line, quickly return to the right direction, and stop when the rear wheel is about 30 cm away from the bottom line. Then shift to the first gear. When the front of the car is about to touch the line, the steering wheel will kill to the right, then turn right and stop to complete the parking test.
Extended data
Reverse warehousing skills
1. There is a key point when reversing into the warehouse, that is, the body is 30 cm away from the foot of the warehouse. As long as this is found, it is not difficult to reverse the car into the warehouse. If it is more than 30 cm, it will be killed. If it is small, it will be returned. If it is too narrow, you can straighten it before repairing it. In the process of reversing, be sure to slow down slowly, so as to have time to adjust the car.
Step on the clutch when reversing, and the speed must be steady. The speed of the car has slowed down, and even if it doesn't look good, there will be time to repair it if something goes wrong. It's best to wear shoes with thick soles when driving, and sports shoes with a little slope are the best. Clutches with thick soles will be much easier and more stable to step on, which is very suitable for novices.
It's never too late to kill as soon as possible. You can go back if you kill early.
4. The car body must be put into storage. In the course of the exam, it is a pity that there are not a few students who failed the exam because the car body was not put in storage. The reason why the car body is not in storage is that it is not optimistic, and the other is that the speed is too fast and the clutch brake is hastily stepped on. So we still have to control the speed.
5. After the car body is put into storage, pay attention to the rearview mirrors on both sides to correct the car body, and which side the rear end is wide. Many people will have such a misunderstanding when they first learn to drive: the direction when reversing is different from the direction when the car is moving forward, but it is actually the opposite. Driving is to be quick-witted. When reversing, designing the car in the opposite direction will be very confusing.
It is important to keep a good attitude during the exam. Many students fail the exam not because they can't drive, but because they are unfamiliar with the examination room and have poor psychological quality.
Refer to Baidu Encyclopedia-Reversing Storage
The new website in Resources-Learn from scratch and teach you how to "park your car and put it in the warehouse".