2. Initially adjust the azimuth and pitch angles of the antenna. The north is about 23.5 degrees from south to west, with an elevation of 54.2 degrees, and the south is about 75 degrees from west, with an elevation of 54.2 degrees. Different places will have different angles. After the initial adjustment, turn on the power of the TV and receiver, and turn the TV to AV (video) state.
Generally, we try to fix the elevation angle at the place where we bought it before we get it back. When I come back, I mainly aim at the direction of the satellite without adjusting the elevation angle. Most satellites are located due south and due west. Generally speaking, the signal strength is above 60, so it is not necessary to adjust it very much. The most important thing is to adjust the signal quality.
Extended data:
Methods to improve the quality of satellite TV reception signal;
1, plugging the pot with CD or aluminum can enhance the signal by 3%. Add cans to the C head, and press the short C head.
2. The signal quality is obviously improved 15% by adding broken source disk or self-made IRA ring. A pot of multi-satellite offset aluminum plate, with a 10x 10 aluminum plate on the side of the tuner, improves the signal quality by 3%.
3. Sticking bright aluminum foil on the surface of the pot can also enhance the signal. Adding CD or 20x20cm aluminum sheet into the pot can obviously improve the signal quality 15%, which must be consistent with the curvature of the pot surface.
There is an adjustable resistor in the receiver, which can enhance the signal.
5. Turn on the TV and receiver, press TVAV, and the pot points to the southwest. If you can't find it, press the * key and the TV interface will come out. The TV will show the signal strength. If you can't receive the signal, you should debug it slowly. Don't have a house blocking the southwest direction of the pot.
Baidu encyclopedia-weixingguo