Flowers, wooden lines, beautiful lights
Wallpaper, painting
The location of the sloping roof usually refers to the bedroom or bathroom in the attic. Generally speaking, the room space is relatively narrow and the height is relatively low, so we must pay attention to its space size when decorating the ceiling. At present, there are many ceiling styles and materials on the market, so which ones can be used? Please look at the style and material of the sloping roof ceiling.
Tilted roof and ceiling renderings 1
Tilting roof ceiling style i. Arc ceiling
Visual features: The curved ceiling often walks around the space, but the lines are mostly curved or wavy.
Applicable room: a room suitable for aliens. The room is 2.6 meters high, and there are restaurants, living rooms and so on. I will.
Suitable style: the decorative style is not obvious, which can increase the sense of movement and reduce the sense of dullness.
Common materials: light steel keel+gypsum board
Tilted roof ceiling effect Figure 2
Slope roof ceiling style II. Dome ceiling
Visual features: Dome-shaped ceiling is an arched or covered ceiling.
Applicable rooms: more common in villas, suitable for rooms with extremely high floors or pointed roofs. The lowest point of space is required to be more than 2.6 meters, and the highest point is not required, generally around four or five meters.
Suitable styles: European and partial European.
Common materials: light steel keel+gypsum board, wallpaper, fabric, etc.
Tilted roof ceiling effect Figure 3
Tilting roof and ceiling style three. Flat ceiling
Visual features: it is equivalent to adding a flat plate to the top surface, usually adding an auxiliary light source inside.
Applicable rooms: generally only used in small areas such as halls and restaurants. In order to increase thermal insulation, the top floor will also adopt a flat ceiling. If the use area is large, it is recommended to use it when the height of the room exceeds 2.7 meters.
Suitable style: modern and simple
Common materials: light steel keel+gypsum board
Tilting roof and ceiling style four. Mix and match ceilings
Visual features: ceilings with any two or more of the above ceiling forms or two or more materials.
Affordable housing: relatively complicated. If the height of the room exceeds 2.8 meters, it is suggested to consider using this ceiling, otherwise the space will easily sag.
Suitable for style: it depends on the materials used and the modeling style, but it is not suitable for modern minimalist style.
Common materials: light steel keel+gypsum board, wood floor, sauna board, wallpaper, mirror, glass, etc.
Tilted roof ceiling effect Figure 4
Style of sloping roof ceiling v. shaped ceiling
Visual characteristics: the ceiling with irregular graphics is called special-shaped ceiling.
Applicable room: normal room height (2.6 meters) can be hung. Due to the limitation of materials, these characters are limited to simple cartoon patterns such as stars and the moon, so they are more common in children's rooms.
Suitable for style: suitable for all kinds of styles, depending on patterns and shapes.
Common materials: light steel keel+gypsum board+latex paint.
Tilting roof and ceiling style six. Laminated ceiling
Visual features: suspended ceiling with more than 2 floors.
Applicable room: It is mostly used for units with central air conditioning, because the thickness of central air conditioning is about 35 cm, and the overlapping ceiling can increase the sense of layering, which requires higher room height, generally more than 2.7 meters.
Suitable style: modern and simple
Common materials: light steel keel+gypsum board
Tilted roof ceiling effect Figure 5
Inclined ceiling style. Straight ceiling
Visual features: linear ceiling is similar to the top corner line, but the top corner line is narrower and thinner, while the width of linear ceiling is mostly between 30-45 cm and the thickness is mostly between 8- 12 cm.
Applicable room: the room is 2.6 meters high and can be hung in living room, bedroom and other areas, suitable for square houses.
Suitable style: modern and simple
Common materials: light steel keel+gypsum board