2, frosted glass. It is also made of ordinary flat glass and then frosted. Generally, the thickness is below 9 cm, and the thickness of 5 or 6 cm is mostly.
3, sandblasting glass. The performance is basically the same as frosted glass, except that frosted glass is sandblasted. Because of its visual similarity, many owners and even decoration professionals confuse it.
4, embossed glass. It is a kind of flat glass made by calendering. Its biggest feature is that it is light-tight and light-tight, and it is mostly used in decoration areas such as bathrooms.
5. laminated glass. It is a kind of impact-resistant flat glass made of metal wire or metal mesh embedded in glass plate by calendering method. When hit, it will only form radial cracks and will not fall and hurt people. Therefore, it is mostly used in high-rise buildings and factories with strong vibration.
6. insulating glass. Bonding method is often used to keep a certain interval between two pieces of glass, with dry air in the interval and sealing materials around it, mainly used in decoration projects with sound insulation requirements.
7. laminated glass. Laminated glass generally consists of two ordinary flat glasses (tempered glass or other special glass) and an organic adhesive layer between the glasses. When it is damaged, the debris is still attached to the adhesive layer, which avoids the damage of debris splashing to human body. Mostly used in decoration projects with safety requirements.
8. Bulletproof glass. In fact, it is a kind of laminated glass, but the glass is made of high-strength tempered glass, and the number of laminated glass is relatively large. It is mostly used in decoration projects with very high safety requirements such as banks or luxury houses.
9, hot bending glass. Curved glass made by heating and softening flat glass, molding in a mold and annealing. In some advanced decoration, the frequency is getting higher and higher, and it needs to be booked, and there is no spot.
10, glass brick. The manufacturing process of glass brick is basically the same as that of flat glass, but the difference is the molding method. There is dry air in the middle. It is mostly used in decoration engineering or light-transmitting modeling with heat preservation requirements.
1 1, cellophane. Also called glass film, there are many colors and patterns. According to the different properties of paper film, it has different properties. Most of them have the functions of heat insulation, anti-infrared, anti-ultraviolet and anti-explosion.
12, paint glass. Also called back coating glass, it can be divided into flat glass paint and frosted glass paint. This is a kind of stained glass. When you use it, you will put Guanghua outward, and the other side will be painted. Bake special paint on the back of transparent glass in a moderate oven for several hours. Many places where painted glass is made are generally naturally dried, but the naturally dried paint has relatively small adhesion and is easy to fall off in a humid environment. The glass painted on the back has a strong decorative effect. Mainly used for the decoration of walls and background walls, and also suitable for indoor and outdoor decoration of any place (among which there are many suspended ceilings).
13, high performance insulating glass. High-performance insulating glass not only seals dry air between two layers of glass, but also coats a special metal film with good thermal performance on the air layer in the middle of the outer glass, which can prevent the energy of solar ultraviolet rays from entering the room in office decoration. Its characteristics are good energy-saving effect, heat insulation and improvement of indoor environment. There are eight colors in appearance, which has excellent decorative art value.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd