Summary of training in information management of construction engineering
Manage this week's training data according to the training arrangement. In the study stage, I learned about construction engineering documents and archives.
The basic concept of the case and the scope of filing, but these are just book knowledge! What we need is hands-on ability,
Only in this way can the significance of training be fully reflected.
Data is a necessary condition for project completion and acceptance, as well as for project inspection, modification, expansion and supply.
On the basis of; According to the specification requirements, complete, true and specific engineering technical data is a job.
Necessary conditions for project completion acceptance and delivery; A qualified project must have complete original content.
Complete technical data, authentic and reliable written records; For the evaluation of excellent projects, it is more about watching.
Integrity of technical data; It is also an important content of management to do a good job in building engineering documents and archives.
Eyes; Construction project document management is an important basis for the construction unit to manage the project; So, I know very well.
The importance of data management in engineering!
On Monday, we will be divided into groups. The task on Monday and Tuesday is to collect the basis of project implementation, collect raw materials and half.
Collection of finished products, quality certification documents of finished products, construction test records, quality problems and quality accident handling materials.
In this training, the task of our group is to be responsible for the foundation and foundation construction process and the corresponding data. undeniable
We are beginning to look stupid in this work.
There are long ones!
The model essay on librarian's practice summary This paper sorts out two articles related to the model essay on librarian's practice summary, namely, the model essay on practice and the model essay on practice summary. Refer to the first document similar to the summary model essay for librarians: model essay for internship 2011April 19. Internship time in Tiancheng Capital Community, Beichen District, Tianjin, internship time in Tianjin Branch of Hebei Dayuan Jianye Group. 15 From March 5th to April 5th, 2007, to achieve the goal, production practice is an essential practical teaching link in the teaching plan of engineering management specialty, and it is the unity of theoretical knowledge and engineering practice. During the internship, I went deep into the construction unit as a technician, took a high-rise residential area as an internship place, participated in the engineering construction work under the guidance of the director of the technical office of the project department, and successfully completed the five-week internship task. At the same time, it also lays a good foundation for the project time after graduation. Project Name Tianjin Tiancheng Shoufu Residential Area Phase II Project Location Tianjin Beichen District Construction Unit Tianjin TEDA Group Supervision Unit Tianjin Hongtai Engineering Consulting Co., Ltd. Design Unit Beijing Huazi Engineering Design Co., Ltd. Construction Unit Hebei Dayuan Jianye Group Planned Commencement Date July 20, 2006 Planned Completion Date June 2008 1. No.5 This project is a group project * * * including three high-rise residential buildings on floors 5, 6 and 8, 12 underground garage,10/floor substation, with a total construction area of 63000.2m2, a five-floor construction area of 9932.0m28 and a floor area of 28293.4m25, and the eighth floor is composed of the main building and annex buildings. The second underground floor of the main building is a civil air defense floor, the first underground floor is an equipment floor, and the attic on the ground 18 floor and local 19 floor is a residential annex. The second floor underground is the equipment floor, and the second floor above ground is the clubhouse building, with a total height of 53.85 meters. The basic structure of the main building is the raft foundation, and the main structure is the fully cast-in-place shear wall. The six-story building area is 19300 m2, the first floor underground is the bicycle garage, and the fourth floor above ground is 14. The total height of the duplex apartment building is 44.50 meters, the basic structure is raft foundation, and the main structure is full-cast shear wall structure. 1 1 floor substation has a building area of 443.6m2, and the main structure on the second floor above ground is a frame structure. 12 underground garage with a construction area of 5038.5m2 The underground garage is the driveway entrance, civil air defense entrance and substation underground garage. The basic structure of civil air defense material warehouse is raft foundation, and the main structure is frame-shear wall structure. Since June 15 to September 15 is the rainy season in Tianjin every year, according to the documents issued by Tianjin Flood Control Headquarters, this project entered the flood season from June 10. Three. Practice content 3. 1. Familiar with project construction management and technical management. Because of the short practice time, I only participated in the specific operation of the construction process. The following is a brief overview: 3. 1. 1. The technical person in charge of the project is responsible for implementing the technical post responsibility system and technical disclosure system. Before each working procedure, technical disclosure must be made and the "Technical Disclosure Record" must be filled in. 3. 1.2 The project manager instructs all professional engineers to fill in the "Construction Log". The Engineering Manager shall record and keep a detailed "Construction Log". The contents of the "Construction Log" include the following aspects: the construction site of the day, the number of construction personnel at the site, the specific construction team, the specific person in charge at the site, the materials and equipment used in the construction, the operation method or technical disclosure, the climate of the day, the inspection and test of the construction site of the day, and the problems existing in the construction. 3. 1.3 During the construction process, the engineering room is responsible for on-site labor deployment, schedule management, machinery use and construction safety, and keeps relevant records. The project manager is responsible for presiding over the regular meeting of the project every week, summarizing the progress of the project last week, finding out the gap between the actual progress of the project and the plan, and arranging the work this week. The chief engineer of the project summarized the construction quality last week and put forward suggestions and requirements for the next quality management. 3. 1.4 The system of self-inspection, mutual inspection, handover inspection and special inspection shall be implemented in the construction process. The quality inspector of the construction team shall fill in the self-inspection form after passing the self-inspection of each working procedure, and the next working procedure can be carried out only after being rechecked and checked by the relevant operation monitor. Unqualified processes must be reworked, and the next process can only be carried out after being qualified again. This project strengthens the quality control of all subdivisional works by establishing joint inspection system and filling in quality joint inspection form. The application for concrete pouring must be filled in before concrete construction. 3. 1.5 The professional engineer is responsible for communicating the design changes in the construction process to all business outlets and related construction teams in a timely manner according to the provisions of the contract change management section of this quality plan. "3. 1.6 concrete, mortar and waterproof materials shall be sampled by operators and sent to the company's laboratory for testing, and then released accordingly. 3. 1.7 After the quality inspector of the concealed engineering project passes the inspection, the professional engineer fills in the concealed engineering acceptance record and submits it to the owner or supervision engineer for acceptance. After the owner or supervision engineer signs the acceptance record, the construction can continue. 3.1.The monthly progress plan is compiled by the technical office, and the project manager is responsible for decomposing the monthly progress plan into dynamic monitoring and quantitative management every week to ensure the construction progress. 3.2, the specific operation of the construction technology 3.2. 1 Writing the construction technical disclosure and attending the technical disclosure meeting is the premise of each sub-project/division project, and it is also a consistent technical guidance, which directly affects the quality of the project, and its reliability is very important. So as a technician, after I finish the disclosure, I must submit it to the director of the technical office for approval before I can make disclosure to the construction team leader. During my internship, I specially wrote the technical disclosure of floor pipe hole plugging, underground garage foundation pit backfilling, air conditioning hole punching, fertilizer tank backfilling and so on. In this process, I searched a lot of information and benefited a lot. When writing the technical disclosure of "floor pipe hole sealing", it mainly deals with engineering quality problems, which are rarely involved in class. Pipeline hole is a hole reserved for hydropower pipeline in the process of floor construction, and its aperture is larger than the radius of pipeline. If it is not blocked or not tightly blocked, it is very easy to leak water, so it needs technical treatment. Generally speaking, the pipeline shaft is mainly chiseled into a figure of eight, as shown in the figure-for special cases, such as floor reinforcement blocking the pipeline, the structural floor is chiseled out or the expansion bolt is used to connect with the main body to form a figure of eight reinforcement, and the lap welding is adopted, and the reverse welding length is adopted. The subsequent operation procedure is the same as the general situation. The preparation of the technical disclosure of Backfill of Foundation Pit in Underground Garage mainly uses the knowledge of "soil mechanics", such as checking the quality of backfill, sampling and measuring the organic content, dry density and moisture content of soil with circular knife method, and controlling the quality of soil with the volume ratio of backfill to lime powder. During compaction, dry soil can be properly wetted with water, but the phenomenon of "rubber soil" is strictly prohibited to ensure the bearing capacity and settlement of foundation. Through the preparation of technical disclosure, I have a certain understanding of the construction technology of sub-projects/sub-projects, which not only consolidates the professional knowledge learned in class, but also familiarizes myself with relevant specifications and learns a lot of knowledge outside books. 3.2.2 Participate in the inspection and acceptance of project quality. In the process of construction, the construction team will pass the self-inspection, mutual inspection and handover inspection, and then report to the project department. The next working procedure can only be carried out after the project quality inspector has passed the re-inspection. At the same time, I participated in the inspection and acceptance of engineering quality as a quality inspector. Be familiar with the construction drawings before going to the site, such as the reinforcement diagram of the wall, the reinforcement diagram of the floor beam and the template construction drawing. When the template is accepted, it is mainly to check whether the joint is tightly sealed, whether the verticality is qualified, whether the template installation meets the requirements of room width, and so on. When the reinforcement is accepted, it is necessary to check the thickness of the protective layer of the wall, the spacing of stirrups, the reinforcement of ladder reinforcement, concealed column and concealed beam, etc. For plastering decoration, it is necessary to check whether the napping strength and surface smoothness are qualified, and whether the waterproof layer laying meets the specifications. 3.2.3 Assist on-site technicians to deal with construction quality problems. At the beginning, all I did was count the types, exact locations and quantities of engineering quality problems, such as honeycomb holes, slurry leakage, exposed tendons, expanded formwork, rotten roots and so on. By studying the technical disclosure of the repair scheme, I actively consulted the relevant technicians and gradually mastered the methods to deal with these problems. The repair scheme is effective for a small number of small honeycombs, pits and leaking tendons. Brush the concrete surface with a steel wire brush, then clean it with water and wet it. Then plaster with 12.5 cement mortar and building glue. After initial setting, strengthen maintenance work. When the honeycomb is serious or the reinforcement leakage is deep, remove the unconsolidated concrete and outstanding aggregate particles nearby, rinse them with clear water and fully wet them, then fill them with fine stone concrete one level higher than the original strength grade, and tamp them carefully to prevent expansion and deformation. The staggered concrete structure should be cut according to the drawing size, and then cut hair according to the line. First, chisel with a sharp chisel. After the chisel and chisel are basically in place, carefully chisel and chisel with a flat chisel to avoid exposing the steel bar and level it off. 3.2.4 Sorting out engineering data I sorted out a lot of engineering data during my internship, such as concrete pouring application, concealed engineering inspection records, engineering materials entry inspection sheet, materials and components entry inspection records, etc. For example, after the application for concrete pouring is accepted by the construction team, the project department and the supervisor, the technical office of the project department will report the required quantity and location of concrete to the concrete mixing station by special personnel. Then, when the concrete truck enters the site, it is required to submit the concrete unpacking appraisal receipt, etc. , the project department will fill in the watering application and submit it to the supervisor for the record. Through the collation of these materials, I learned about the relevant procedures and norms of engineering construction. Fourth, there is no end to practical experience thinking and innovative learning. Through the results you see, you can actively think about the causes of the problems and the ways to deal with them. Only in this way can we learn more knowledge in our work and really achieve a good internship effect of integrating theory with practice. In the process of dealing with the engineering and technical problems you encounter, you can enhance your ability to analyze and solve problems. Many new technologies and materials have been adopted in the construction of this project. The main structure is full cast-in-place shear wall structure, with concealed columns and concealed beams inside, which increases the room area and clearance height. In decoration, such as kitchen and bathroom, lightweight ceramsite concrete partition board is used. Compared with the previous brick wall, this partition wall has the advantages of light weight, simple installation and reliable strength, which not only greatly reduces the load borne by the cast-in-place floor, but also speeds up the construction progress, shortens the construction period and saves the cost. In the process of acceptance of constructional column reinforcement, the design unit chose smooth round reinforcement in the adoption of vertical reinforcement, but the friction between the stirrup bound by the construction team and the smooth round reinforcement was too small in the construction process, which led to the stirrup slipping and brought inconvenience to the construction. Therefore, the construction team changed the smooth circular steel bar into threaded steel bar to increase the friction of stirrup binding construction, but this change greatly increased the cost. Through positive thinking, I put forward the following rectification plan to the director of the technical office. The four vertical rods of the concealed column are composed of two smooth round steel bars and two threaded steel bars, which are placed diagonally as shown in the figure. This not only increases the stability of stirrups, but also facilitates the construction and reduces the cost. The plan was affirmed by the director. V. Summary of Practice After several weeks of production practice, I was deeply impressed. In construction technology, the actual operation is based on theoretical knowledge, but it is more flexible and operable than theoretical knowledge. It is necessary to learn professional knowledge, actively think and use it flexibly in work, and cultivate their own thinking innovation and independent problem-solving ability. At the same time, I used this internship opportunity to get in touch with the society, got a good exercise, and made clear the direction I should develop in the remaining year of college life, especially to exercise my language exchange and communication skills, study hard, work hard and face every challenge actively. The second article is a model essay on librarian's internship summary: 0 1, July 2009. The two-week metalworking internship was over, and we left the industrial training center with some disappointment. Two weeks is too short for us to get in touch with all kinds of jobs, but the busy and substantial two weeks really benefited everyone, exercised their hands and brains, and became familiar with some basic industrial processing methods and processes. Mastered the operation methods of some commonly used machines. This is a rare learning opportunity and experience for an engineering student, which has laid a certain practical foundation and accumulated valuable experience for entering the factory in the future. Every day during the internship, there are fresh contents and new challenges. At the practice base, I felt the feeling of entering the factory for the first time, and I was very excited at the thought that I would become their operator. Some of them are older than me. In the 1980s, some productive forces have been eliminated in actual production, but it is still of great educational significance for us engineering undergraduates who focus on understanding their working principles and operations. Nevertheless, I found that it is not as easy as I thought to operate them freely. I found that my gap is still very big and there is still a long way to go. In the early stage of internship, I contacted two important machine tools-lathe and milling machine. Because I am exposed to the old-fashioned machine manual operation, it still accounts for a lot. Because of its heavy weight, there are many buttons, handles and dials on it. We spend a lot of time getting familiar with the machine, and then we can't wait to process it in kind. Lathe is a machining method that changes the shape and size of the blank and processes it into the required parts by using the rotary motion of the workpiece and the motion of the cutter. For us, it is not required to process fine parts, but to familiarize us with the operation of the machine. Our task is to work in a cylinder. Grooves and spheres are respectively processed at both ends of the blank. After several failed jobs, a satisfactory work was finally processed. At first glance, the shape of the sphere can be roughly recognized, but my goal has been achieved. Another important machine in industry is milling machine, which can be used to cut workpieces, such as plane steps, groove, forming surface gears, cutting and so on. It can also drill holes. The task of operating the machine in groups of three is to process a cylindrical blank into a cube. This time, the three of us cooperated well and completed the task with high efficiency and high quality. The fly in the ointment is that the edges are not smooth. This internship content made me experience the efficiency of teamwork and the pleasure of successfully processing parts for the first time. Although I still have to work hard to deal with the spilled coat after returning to the dormitory, we began to contact the more advanced machine-numerical control. There are three kinds of lathes: CNC lathes, CNC milling machines and CNC wire cutting. In actual processing, we must first edit the program on the computer, and then import the program into the machine for processing. The machining accuracy is much higher than that of the previous ordinary lathe. In the meantime, I also learned to operate several important softwares simply, such as SolidworkPowermill. The only thing that bothers me is the programming problem. It's hard to write a program, and the result is electricity. I can't simulate it in my mind, and I can barely finish the task after asking for help from many parties. What opened my eyes most was the introduction of rapid prototyping technology, which belongs to a high-tech and has not been popularized in China at present. The rapid prototyping machine using special gypsum material, called quot, aroused my great interest, marveled at the intelligence of human beings, and realized the gap in this respect in China. Of course, there are also many interns. More interesting internship contents are like heat treatment and casting. Heat treatment refers to the process of heating, insulating and cooling steel in solid state to change the internal structure of steel and obtain the required properties. I used to think it was fun to strike iron and cast a sword on TV, and then I quickly put the iron in water to cool it before hitting it, but I don't know why the sword treated in this way can be stronger, firmer and sharper. Now that I have learned heat treatment, I understand that it is a quenching process. After quenching, the strength and hardness of the workpiece can be improved and the wear resistance can be improved. In addition, there are several heat treatment processes such as annealing, normalizing and tempering, each of which has its own function and can be used to process various workpieces that meet different requirements. Another gain is that I have mastered how to distinguish high carbon steel, medium carbon steel and low carbon steel by using the sparks formed when steel is ground on the grinding wheel. The practice place of foundry is the simplest, only a row of high piles of sand are piled in a simple shed. There are some tools on both sides of where we sit. Seeing this scene, we can play with sand. We seem to be ten years younger at once. Casting refers to the molding method of melting metal into a mold and pouring the molten metal into the mold to obtain a casting with a certain shape and performance. Although it seems simple, this process has been so primitive for one or two thousand years, but the actual operation is not so simple. This is hard work, which requires care and patience. Some students' molding sand strength is not enough, and sand collapse often occurs in the process of handling and packaging. Some students have no patience and care when processing mold cavities. As a result, they have to spend a lot of energy to repair the mold cavity after destroying it to varying degrees. Some students are not very clear about the processing procedure, only to find that the previous step was not completely completed. I am relatively successful. Afternoon and afternoon works have achieved good results, but the harvest is huge. With the progress of China, after China's entry into WTO, China has become the center of the world's manufacturing industry, and needs a large number of talented people with practical knowledge and high skills. The contents of our two-week internship are all the knowledge that China manufacturing talents should have at present, especially the contents of numerical control technology and computer application. For an engineering student, these are the basic skills that should be possessed, which can not only cultivate their innovative and practical ability, but also improve their competitiveness and win employment advantages for entering the society in the future. Summarize and show my internship. From February to April, 2005, I worked in Ningbo Haishubi Information Technology Co., Ltd. as an office clerk ... This is the first time that I officially joined the society, set foot on my job and started a completely different life. Go to work at the specified time every day, and finish the work carefully and on time, and don't be sloppy. We begin to bear civil liability on our shoulders, so we should be careful in everything, otherwise we may bear serious consequences and pay a huge price at any time because of a small mistake, which can no longer be solved by an apology and an apology letter. "All heroes in the world are urged by our generation as soon as they enter the rivers and lakes." From school to social environment, the people around you have completely changed their roles, teachers have become bosses, classmates have become colleagues, and they get along in completely different ways. In this great transformation, we may be confused and unable to adapt to the new environment immediately. We may not be used to the brutal competition between enterprises and can't stand the indifferent eyes and words of colleagues. Many times, I feel that I have not been reused by the leaders, and I have only done some unimportant chores, and my proposal or work has not been affirmed by the boss. When you can't make achievements, there will be pressure from all sides, glances from the boss and ridicule from colleagues. At school, there are classmates and teachers who care and support, and it is very easy to attend classes every day. As the saying goes, it is better to study for more than ten years than to work for one or two years. Although the two-month internship is not long, I have learned a lot from it, such as being a man, doing things, learning and self-learning. Only after taking part in work can we deeply understand the meaning of this sentence. Apart from English and computer operation, the theoretical knowledge learned in textbooks is rarely used. I am a clerk. At work, I just call to process documents, and I hardly use my professional knowledge. Website developers of the same company are very different. Computer knowledge is changing with each passing day In a project, they are often asked to learn to develop and design in a new computer language in a short time. They can only study hard on their own basis and master knowledge as soon as possible. In this era of information explosion, knowledge is updated too quickly, and it is definitely not possible to rely on the original knowledge. Be sure to work hard, ponder slowly, learn and accumulate. It's really bad to try to solve problems you don't understand first. People who can consult others with an open mind but have no self-study ability will be eliminated by enterprises and society sooner or later. Because I still live on campus, I have to get up before 7 o'clock every day to squeeze the bus. Even in cold and bad weather, I have to go to work as long as it is not a weekend. Sometimes the company is busy and has to work overtime at night or on weekends, leaving less time for personal control. If you don't want to go to work, you should refrain from coming at will, but you can sleep late at school and skip class when you really don't want to go to class. It's easy to get bored by repeating tedious working hours every day for a long time. It's like I just sit on the computer and type every day. It's boring. But you can't be sloppy when the work is simple. A small mistake may bring great trouble or loss to the company, but you should finish it seriously. Like the network promoter of the same company, I have to make a phone call every day, and my mouth is thirsty. Not to mention, they have to put up with the unfriendly tone of some telephone receivers, and some even say that they want to complain. If any company is interested, it must travel around to discuss. In fact, all businesses can't be successful in one transaction. They must have perseverance. When encountering setbacks, they must never give up their mistakes. When they are scolded by the leaders, they must not resign angrily. And website developers often have to drink coffee and stay up late to catch up on projects. We have always depended on our parents' income, while some people spend money lavishly. Maybe after work, we can realize that the money earned by our parents is hard-won. And we should start to consciously cultivate our financial management ability. Our salary level is generally not high just after graduation. In addition to rent, meals and daily expenses, sometimes we send some money to our parents to subsidize our family. We often have little left, and if we are not careful, we may make ends meet and become a moonlight family. But at this time, we are no longer embarrassed to reach out to our parents. So many times we have to rationally control this poor money in our hands. Get along with colleagues and step into society. We deal with all kinds of people. Because of the interests and busy work, many times colleagues will not care about you like classmates. However, some colleagues are smiling at each other on the surface, but they are intrigued behind them, and they keep climbing onto others' shoulders by hook or by crook, so we just leave school and often can't adapt. For example, colleagues who do network promotion in our company pay great attention to the confidentiality of customer information in order to avoid their achievements being taken away by colleagues, so the relationship seems a bit indifferent. But the environment often affects a person's work attitude. In a cold and impersonal office, everyone will have no attachment, there will be better opportunities, and they will definitely quit without hesitation. They are depressed, which leads to low work efficiency. Every day, they just wait to go home from work early to accompany their families. Occasional birthday parties for colleagues and a little sympathy when you are sick will help to create a harmonious working environment in Qile. Being in a good mood and happy at work is conducive to the development of the company. I have seen the right and wrong between colleagues in sinister companies on TV more than once. I think what I can do is "work more and gossip less". In the remaining months before graduation, I cherish getting along with my classmates more. To sum up, I am a management major student. I have learned many sets of classic management theories in books, which seem easy to understand, but I have never put them into practice. Maybe I won't realize how difficult it is until I really manage a company. We have seen many wonderful negotiation cases in teachers or books, and it seems easy to realize our lack of ability and knowledge. During the two months of internship, I broadened my horizons, increased my knowledge and experienced the cruelty of social competition. More importantly, I hope to accumulate experience in all aspects in my work and prepare for my own entrepreneurial road in the future. During the internship, the master always patiently explained my doubts and led me to supervise the actual operation of librarians. During these two and a half months' internship, I learned a lot of knowledge outside the textbook, learned things that I can never understand in the textbook, and made great progress. In college, my major is municipal engineering technology, and I don't know much about information. Although I have obtained the certificate of archivist, I haven't put it into practice yet, and I have only a little knowledge of theoretical knowledge. When I first came into contact with the librarian, the representative of the on-site project director and the master gave me great support and helped me learn a lot of job knowledge. By reading the preliminary data, carefully reading the supervision specifications, reading the company's instructions on quality, environment and occupational health and safety, I learned about the supervision work from the director's representative, professional supervision engineers and masters, and learned the work knowledge of supervision. Have a certain degree before internship.