Safety operation procedures for climbing work?

What are the specific contents of the safety operation procedures for climbing operations? Here, Zhong Da Consulting will answer your questions.

1, aerial work personnel must pass physical examination before they can engage in aerial work. Anyone suffering from hypertension, heart disease, epilepsy, mental illness and other personnel who are not suitable for working at heights is prohibited from working at heights. 2, more than 2 meters from the ground or working slope is greater than 45, there is no stable foothold or vibration of the working ground, should be regarded as climbing operations, must go through the formalities of climbing. 3, protective equipment should be dressed neatly, trouser legs should be fastened, wear a helmet, are not allowed to wear smooth hard shoes, should have enough strength of seat belts, and the rope should be tied to a solid building structure or metal structure, are not allowed to be tied to a living body. 4. Before climbing the mountain, the construction director or team leader shall conduct on-site safety education for all personnel. 5. Check the climbing equipment and safety equipment (such as safety helmet, safety belt, ladder, climbing board, springboard, scaffold, protective board, safety net, etc.). ) Use must be safe and reliable, and it is forbidden to take risks. 6, close to the power supply (low voltage) line operations, should first contact the power outage personnel, confirm the power outage rear can work, the operator should be at least 2 meters away from the wire, it is forbidden to work under the high voltage line. 7. Tools, spare parts and materials used for aerial work must be put into tool bags. Don't hold objects when going up and down, you must go up and down according to the specified route. Do not throw materials or tools at high altitude, and do not pile tools and materials that are easy to roll on scaffolding. You are not allowed to play at work. After work, all falling objects, such as tools, scattered materials and other parts, should be cleaned up in time to prevent people from falling. Reliable lifting tools should be used when lifting large objects. 8, homework at night, must have enough lighting facilities, otherwise it is forbidden to work. 9, it is forbidden to vertical operation at the same time. 10, it is forbidden to sit and lie at high altitude to prevent falling. 1 1, hoists and other lifting equipment are forbidden to carry people up and down. 12. When working on asbestos shingles, you should use a springboard pad to act on asbestos shingles to prevent them from falling off when you step on them. 13, no matter what, you are not allowed to work or pass on the top of the wall. 14, two people can't work at the same time on the planks over 3m. 15, high-altitude welding and gas cutting operations, must go through the hot formalities, clean up the flammable and explosive articles within the spark range in advance, and supervise by designated personnel. 16, when water freezes, it must be removed and anti-skid measures taken before operation. In case of strong winds above level 6, it is forbidden to work in the open air. 17, when using a ladder, be sure to check whether the ladder is firm and meets the safety requirements. The gradient of the vertical ladder is 60. The width of the ladder bottom shall not be less than 50 cm, and it shall be equipped with anti-skid devices, and shall be guarded by special personnel. The rope of the herringbone ladder shall be firm.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd