Summary is a written material that analyzes and studies the relevant situation at a certain stage and makes guiding conclusions. It helps us to find the laws of the development of work and things, so as to master and apply these laws. So do a good summary and write a good summary. How to focus on the summary? The following is a summary of my work in the rubber industry, which is for your reference only and I hope it will help you.
Year XXX is the first year of entering the new century and implementing the tenth five-year plan. According to the general requirements of economic work put forward by the Central Economic Work Conference and the working ideas and requirements of the fifth Council, the Xi 'an meeting at the beginning of XXX put forward the general plan of the work of the association in XXX. Looking back on the work of the Association in the past year, we believe that under the leadership of the Standing Council and the efforts of all the staff of the Association, all the tasks have been successfully completed, which has promoted the development of china rubber's industry.
I. Development Status of XXX National Rubber Industry
According to the statistics of the National Bureau of Statistics, the gross output value of the national rubber industry in XXX was 88.235 billion yuan, up by 9.34% over the previous year, and the sales revenue was 79.549 billion yuan, up by 8% over the previous year. 28%, the total profit was 2.77 billion yuan, an increase of 14738+0% over the previous year. The total foreign exchange earned by export was 7.599 billion US dollars, an increase of 5. 12% over the previous year. Among them, rubber overshoes amounted to 5.025 billion US dollars, an increase of 6.06% over the previous year; Rubber and rubber products reached $654.38+686 billion, an increase of 4. 18%; 739 million US dollars of tires, an increase of 0.27% over the previous year. The output of various products is: 654.38 34 million sets of tires, an increase of 8.24% over the previous year, including 3,965.438 09 million sets of radial tires, an increase of 654.38 04.83% over the previous year; Bicycle tires 2. 7.5 billion US dollars, an increase of 0. 73%; The conveyor belt was 72.46 million square meters, an increase of161%over the previous year; The triangle was 637 million cubic meters, an increase of 3. 92%; Rubber hose 2 1 1 100 million standard meters, an increase of12.8% over the previous year; 808 million pairs of rubber shoes, an increase of 0.5% over the previous year; 763,600 tons of carbon black, an increase of 65,438+03.38% over the previous year; Rubber additives reached140.4 million tons, an increase of 8.25% over the previous year.
According to the statistics of 325 member units of China Rubber Industry Association, the total industrial output value of XXX was 44.575 billion yuan, up by 5.74% over the previous year, the sales income was 465.438+78.8 million yuan, up by 8.58% over the previous year, and the total profit was 845 million yuan, which turned losses into a whole. The output of various products is: the annual output of tires is 83.77 million sets, down by 2. 14% over the previous year, of which the output of radial tires is 30.07 million sets, up by 2.45% over the previous year; There were 265,438+bicycle tires, an increase of 5.38% over the previous year; The conveyor belt was 42 1.9 million square meters, an increase of1.3.97% over the previous year; The triangular belt was 364 million a meters, an increase of 4.3% over the previous year; Rubber hoses were 27 million standard meters, an increase of 22.7% over the previous year; Rubber shoes. 2.9 billion pairs, up by 7.87% over the previous year; Carbon black was 484,300 tons, an increase of 65,438+08.18% over the previous year.
Second, XXXX work summary
1. Carry out investigation and study, sum up experience and promote the development of the industry.
In XXX years, all branches strengthened their investigation and research work. According to statistics, the congress and the branch visited and investigated more than 200 member and non-member enterprises, mastered a lot of first-hand information, strengthened contact with enterprises, exchanged information and summed up experience.
The tire branch mainly visited and investigated different types of tire enterprises, such as foreign capital, private enterprises and state-owned enterprises, to understand their development and deepen their relationship.
The Pipe Belt Branch investigated the production of V-belts in Zhejiang Province and conveyor belts in Hebei Province, and wrote valuable investigation reports. According to the survey, the output of V-belts in Zhejiang Province is about 250 million a meters, and that of conveyor belts in Boye area of Hebei Province is about 1 10,000 square meters, accounting for almost one-third of the national output. The product quality and production scale are constantly improving. This fact is very enlightening to the development of China tape industry.
In addition, the Branch also popularized the experience of Gu Yong Rubber Factory, Sanlishi Rubber Factory, Fuxin Rubber Factory and Tongxiang Rubber Factory.
In order to promote the reform of enterprise system, Rubber Shoes Branch held an on-site exchange meeting in Rongguang Group, Ruian, Zhejiang Province, to feel the atmosphere of private enterprises and learn from the experience of private enterprises, which left a deep impression on the delegates.
The reclaimed rubber branch believes that there are many ways for the association to serve enterprises, and it is most important to go deep into the front line of enterprises, master first-hand information, make suggestions for enterprises and help them develop. They visited and investigated more than 40 enterprises in XXX years, and summarized and popularized the experience of four enterprises, including Jiangxi Jishui Rubber Factory.
The product branch strengthened the contact with member units, helped many enterprises solve their difficulties, and was well received by enterprises.
2, to carry out technical exchanges, technical consultation, technical training, and promote the technological progress of enterprises.
Li Tire Branch held a XXX-year technical work conference to exchange experiences, which especially promoted the butylation of inner tubes.
Rubber overshoes branch and related units jointly sponsored seven industry standards publicity meetings, including "Ordinary Sports Shoes".
In view of the quality problems of natural latex in China, the latex branch held the "Technical and Quality Cooperation Meeting of Natural Concentrated Latex" in Hainan, which attracted the attention of Hainan Agricultural Reclamation Department and promoted the improvement of latex quality.
Reclaimed rubber branch has achieved remarkable results by combining the third meeting of the fifth session of the Council, the member representative meeting, the scientific and technological information exchange meeting and the equipment Expo. Organize the formulation of standards for reclaimed rubber and vulcanized rubber powder, and report them to the State Administration of Technical Supervision, Inspection and Quarantine.
The head mold branch actively promotes the improvement of manufacturing technology of motorcycle tires and motorcycle tire molds, so that their quality level is basically close to the world advanced level.
Tianjin Training Center of China Rubber Industry Association (Tianjin Industry and Trade School) opened four secondary specialized rubber technical correspondence classes in XXX, enrolling 102 students. The examinations for three courses have ended, and the examinations ended at the end of XXX 10.
Rubber overshoes branch continued to hold "Rubber overshoes structural design training course" jointly with Shanghai Rubber overshoes Research Institute, and has trained 2,248 rubber overshoes designers for the industry. It also organized internships and thesis defense for graduates from the School of Footwear Engineering of Qingdao University.
3. Do a good job in information service in an all-round way
(1) Progress has been made in the overall revision of china rubber magazine.
According to the requirements of the fifth Council, China Rubber was completely revised in XXX and made progress in stages. From the past small 16 format to the international standard large 16 format; Change domestic distribution to domestic and foreign distribution; Implement the periodical Council system; Initially form a communication network with industry experts, special correspondents and professional branches as the main body; A number of articles with depth and weight have appeared; Advertising and circulation have greatly increased. China rubber is presented to readers with a brand-new look.
It is particularly worth mentioning that in XXX years, various branches and local associations increased their support for China Rubber and actively provided articles for China Rubber. For example, the duct tape branch, the reclaimed rubber branch and the Anhui Association have all written high-quality articles.
(2) Each branch provides a lot of information for the enterprise.
In XXX, each branch * * * publishes more than 5 million words of information publication 100, which provides a lot of information for member units. Each issue has its own characteristics, some of which are informative in the market, some are illustrated with pictures and texts, and some are highly technical, which are welcomed by readers.
(3) china rubber. com has made great achievements.
In order to promote the application of information technology in rubber industry, the association signed a cooperation agreement with Shanghai New Vision Network Information Co., Ltd. in September XXX, and jointly established china rubber Network. The two partners have complementary advantages and have made great progress in XXX's website work. Each branch has set up a web page on the website, and there are many member units, which broker a lot of business. In June, the 2 1 Century WTO and china rubber Industry Seminar was successfully held. China rubber. com has become the most famous professional website in the rubber industry, which has caused great repercussions in the rubber industry. More and more people in the industry realize that it is the general trend and far-reaching significance to carry out e-commerce in rubber industry. It is a revolutionary reform of traditional marketing business and industry exchanges and cooperation, which can not only reduce marketing costs, but also greatly reduce unhealthy practices in marketing business. It will also have a major impact on the future work style of the association.
Now the association has built a local area network and gradually realized paperless office.
(4) The national rubber industry information conference was held.
In the middle of May 438+10, the Association successfully held the National Rubber Industry Information Meeting in Ningbo, which was the second national rubber industry information meeting after XXX Taian Information Meeting. More than 200 people from the national rubber industry and related industries attended the meeting. With the theme of "technical innovation, opening up the market", the conference published "china rubber's industrial situation and current main work? Quot The Tenth Five-Year Plan covers science and technology planning and technical innovation tasks, high-tech applications, tires and other industries 1 1, with a total of 400,000 words, which was well received by the delegates. It is considered that the annual national rubber industry information conference is informative and instructive, and it is worth attending.
(5) Editing and publishing tons of sweat? In order to introduce china rubber industry comprehensively and historically at home and abroad, it is decided to edit and publish china rubber Industrial Yearbook year by year from XXX. This book is the only large-scale information document of china rubber industry in the rubber industry sponsored by China Rubber Industry Association. In order to organize the editing and publishing of the yearbook, XXX set up an editorial board at the beginning of the year, and organized more than 20 experts from all over the country, including branches and local associations, to write articles. After a year of hard work, the annual volume of XXX will be published in the first quarter. The contents of this yearbook include: the general situation of national rubber industry development in XXX years, the general situation of rubber industry in major industries and important regions, import and export trade, scientific and technological achievements, industry organizations, industry events, economic statistics over the years, economic statistics of related industries, economic statistics of foreign rubber industry, enterprise directory, etc., with a total of more than 300,000 words. This comprehensive, continuous, comprehensive and authoritative large-scale reference book will provide good guidance for the planning, planning, scientific research, production, marketing and new product development of China's rubber industry, and provide a shortcut for foreign countries to understand china rubber's industry.
4. Strive for policies and do practical things for enterprises.
(1) Actively strive for exemption from tire consumption tax.
In view of the overall loss of XXX tire industry, after XXX exempted radial tire consumption tax, the industry situation has improved, but the state-owned tire enterprises mainly with bias tires are still facing difficulties. With the active participation of the Tire Branch, a report on tire consumption tax exemption was submitted to the relevant state departments in the first half of the year, and it was reported to the top leaders of the country through the Industrial Economy Internal Reference of the Federation of Industrial Economics and the Chemical Industry Internal Reference of China Chemical Industry Newspaper. Li Rongrong, director of the State Economic and Trade Commission, paid attention to it and instructed the Economic Operation Bureau of the Economic and Trade Commission to conduct research. The Federation actively cooperated, participated in the second forum, provided a lot of information, and interviewed State Taxation Administration of The People's Republic of China and the Ministry of Finance to explain the situation, but there was no result. To this end, the Federation wrote a report to the relevant state departments at the end of XXX, and issued an appeal in China Rubber. Unfortunately, despite a lot of work, there is still no reply.
Motorcycle Tire Branch has also called for exemption of consumption tax on motorcycle tires for many times, and the conference also wrote a report on this.
(2) Make active efforts to rectify small tires and eliminate backward production processes and products.
Regarding the rectification of small tires, on the basis of a large number of reports written after investigation and research in XXX years, according to the opinions of the Economic Operation Bureau of the State Economic and Trade Commission, the relevant reports of the Economic and Trade Commission in XXX years were included.
According to the work requirements of the State Economic and Trade Commission to eliminate backward production processes and products, four products with an annual output of less than 500,000 bias tires, dry granulation carbon black with an annual output of less than 1 10,000 tons, soft-edged bicycle tires and cotton canvas conveyor belts are listed in the elimination catalogue.
(3) In view of a large number of low-priced carbon black imported from abroad, countermeasures should be taken actively.
5. Establish a professional committee of rubber additives.
In order to promote the contact and development between additives industry and rubber industry, after careful preparation, rubber additives professional Committee was established in Hangzhou in June XXX. Up to now, there are 6 1 members, including two foreign-funded enterprises, which basically represent the rubber additives industry. After the establishment of the additive professional committee, a communication meeting was held, a contact manual was compiled, and an expert advisory committee on rubber additives was established. More than 30 enterprises visited the Secretariat with frequent activities and remarkable results, which were well received by enterprises.
6. Strengthen the economic and trade cooperation between China and foreign rubber industry.
In 2000, in cooperation with China United, china rubber Industrial Exhibition was successfully held in India and Germany, which promoted the economic and trade cooperation between Chinese and foreign rubber industries.
The tire branch holds an annual tire export work conference to exchange export information, coordinate relations with relevant government departments, and promote enterprises to export more.
Recycled rubber branch matches the bridge to promote the export of enterprise rubber powder.
7. Formulate and improve relevant rules and regulations.
In order to promote the healthy growth of the association on the legal track, XXX has formulated the financial management system and personnel management system, and organized their implementation. According to the requirements of the Ministry of Civil Affairs on the re-registration of associations, the branch management system of China Rubber Industry Association was formulated.
8. Develop member units and collect membership fees.
XXX has strengthened its membership development, with 92 new members, mainly 6 1 rubber additives branch and 20 new members in reclaimed rubber branch, except for 36 members who quit. At present, there are 874 member units.
In XXX, while actively and steadily developing new members, all branches increased the collection of membership fees, and the membership fee income was better than that of XXX, with an increase of 24. 2%, focusing on economy, basically completed the main indicators of XXX's annual budget.
Three. Work plan for XXXX year
Year XXX is the second year of entering the new century and implementing the Tenth Five-Year Plan, and it is also the first year of China's accession to the WTO. The Central Economic Work Conference put forward general requirements for this year's economic work. According to the working ideas and requirements of the fifth Council, the following work plan for XXX years is put forward.
The general idea of the Association's work in XXX is to implement the spirit of the Central Economic Work Conference, recognize the situation clearly, change ideas, respond to the WTO around the rubber industry, give full play to the role of the Association, actively promote the application of high-tech especially information technology in the rubber industry, and do more practical things for the stable development of China's rubber industry. Continue to strengthen the self-construction of the association, improve the quality and efficiency of work, and contribute to building China into a powerful country in the rubber industry in the world. The specific work has the following aspects.
1. hold a seminar on rubber industry's response to WTO entry.
The rubber industry should change its concept to deal with China's entry into WTO. To this end, the Association plans to hold a high-level industrial forum in china rubber in March, when government officials from the State Economic and Trade Commission, well-known economic experts and professors, state-owned, private and foreign-funded entrepreneurs will be invited to express their opinions on china rubber's industry's response to WTO entry, changing its concept, transforming the traditional rubber industry with high technology, adjusting its enterprise structure and product structure, and reforming its marketing system, so as to promote the development of china rubber's industry.
In addition, it is planned to organize training courses on WTO accession in cooperation with relevant units.
2. Continue to provide information services.
Actively promoting the wide application of information technology in rubber industry is one of the main tasks of the association's service member units. Great achievements have been made in this field in XXX years. This year, we should adapt to the requirements of the situation and continue to make efforts to provide information services for member units and industries by means of magazines, websites and conferences.
(1) Make china rubber magazine better.
In XXX, China Rubber should adhere to the established purpose and policy of running the journal, focus on improving the quality of the journal, and continue to do the following work on the basis of the progress made in the comprehensive revision of XXX.
Organize relevant experts, chapters and local associations to investigate and study china rubber's entry into WTO and rubber products market, and write in-depth and level articles;
Intensify editing and editing, select major events and important events that are generally concerned by the rubber industry for interviews, and report them in time to make the publications closer to enterprises;
Increase the information content of publications, and fully collect and publish the information of this industry and related industries and fields through correspondent expert network, domestic and foreign rubber periodicals and related websites;
Increase advertising and distribution work, and strive for a new improvement in XXX year than XXX year;
Pay attention to the role of the log board.
(2) Strengthen information construction, promote the development of rubber industry, and drive the work of the association.
On the basis of summing up the experience of XXXX years, the information construction of the Association should run its own website well in XXX years, and carry out ranking and brand promotion activities on the Association's website. The general meeting and branches should regularly change their own webpages, enrich the contents of webpages, promote information exchange and e-commerce in the rubber industry, and improve the economic benefits of enterprises through e-commerce. Each branch should take the website of the general assembly as the center and gradually realize the networking of information transmission.
The staff of the general meeting and each branch should strengthen the study of information technology, master information means, and strive to realize paperless information transmission such as statistics within XXX years.
(3) Hold a national rubber industry information conference.
The national rubber industry information conference has been held twice, which has been recognized and actively participated by the majority of enterprises. XXX national rubber industry information conference will be held on June 5438+065438+ 10, and it is planned to be held in the same period as the china rubber Industrial New Technology Exhibition held in Shanghai. The main content is the investigation report of rubber products and related industries. Please include this work in this year's work plan and start the work as soon as possible.
(4) Continue to organize the publication of china rubber Yearbook.
On the basis of XXX years, the compilation of china rubber Yearbook should further enrich the content and improve the quality, and truly become the most authoritative reference book in the rubber industry. Branches and local associations should continue to work hard, make preparations early, collect information and write better industry articles and local articles.
3, to assist the government departments to do a good job in industry management.
The main tasks to be carried out this year are:
(1) Continue to assist in the rectification of small tires according to the arrangement of government departments.
(2) Intensify efforts to strive for tax reduction and exemption, and strive for tire production enterprises to be exempted from consumption tax, motorcycle tires from consumption tax, and reclaimed rubber industry from value-added tax.
(3) Strengthen the statistical work of economic information, and make the Association become the economic information publishing center of rubber industry.
Consider the cooperation between the association's economic information statistics and rubber associations in various provinces and cities, and gradually form a statistical system combining national, local and key enterprises. Improve the accuracy, timeliness and integrity of information exchange. Enrich statistical analysts, adopt modern office means, gradually realize computer networking, and improve work efficiency and timeliness. Strengthen statistical data analysis, and regularly publish economic information and ranking of rubber industry in china rubber magazine and china rubber website. It is planned to hold a rubber industry statistics conference this year.
(4) Actively participate in the quality supervision, certification, licensing, new product identification and promotion of rubber products.
(5) Continue to play the role of Tianjin Training Center of China Rubber Industry Association, complete the teaching plan of four correspondence points in XXX years, and do a good job in the implementation of correspondence points in XXX years. According to the requirements of enterprises, various training courses are offered, and a set of correspondence teaching materials for secondary schools suitable for rubber enterprises is compiled.
4, actively carry out foreign exchanges and cooperation, and promote enterprises to expand exports and go abroad.
In order to meet the needs of China's accession to the WTO, the Association should take assisting enterprises to expand foreign trade and economic cooperation as an important task in the future. This year, it plans to do the following work.
(1) In March, the Association organized a delegation to the rubber industry in Taiwan Province Province to hold a cross-strait rubber industry exposition to promote cross-strait rubber industry economic and trade cooperation.
(2) In cooperation with China United Rubber (Group) Corporation, Shanghai International Rubber Industry New Technology Exhibition was held in June 5438+065438+ 10.
(3) Continue to hold overseas exhibitions in cooperation with China United Rubber (Group) Company. In XXX, exhibitions have been held in India, Britain and Germany. In XXX, it is planned to hold exhibitions in Russia in February and South Africa in June, 438+00.
5. Improve the association organization and give full play to its role.
Last year, the professional committee of rubber additives was established, which played an important role in promoting the communication and development between the additives industry and the rubber industry. According to the experience of setting up the professional committee of rubber additives and the requirements of relevant enterprises, it is planned to set up the professional committee of skeleton materials and the marketing working committee of China Rubber Industry Association again this year. In addition, we will continue to do a good job in renaming the Rubber Shoes Branch of China Rubber Industry Association as the Footwear Branch of China Rubber Industry Association, and renaming the reclaimed rubber branch of China Rubber Industry Association as the comprehensive utilization branch of China Rubber Industry Association, so as to truly live up to its name and broaden the work scope of the association.
6, continue to strengthen the association's own construction, improve work efficiency, and better serve enterprises.
Under the new situation of further strengthening the role of the association, the work of the association has a long way to go. We should continue to change our ideas, improve the ideological understanding of all the staff of the association, and improve their consciousness and initiative in serving enterprises and the government. We must further strengthen our own construction, promote the healthy growth of the association on the legal track, improve work efficiency, push all the work of the association deeper and do better to meet the needs of the situation.
(1) Continue to adjust and enrich the staff of the Association and its branches, select XXX younger comrades with professional knowledge, organizational ability and enthusiastic industry service, enrich and strengthen the work team of the Association, and maintain the vitality and work efficiency of the work team of the Association.
(2) To implement the relevant rules and regulations of the Association and promote the healthy growth of the Association on the legal track. Last year, the association introduced the personnel management system and revised the financial management system, and formulated the branch management measures. This year, we should implement these three systems well and establish other related association systems.
(3) The staff of the Association should strengthen their study, master modern office methods, improve work efficiency, and strive to realize paperless office of the General Assembly and branches this year.
(4) Strengthen the collection of membership dues. Each branch shall pay the membership fee to the general meeting in strict accordance with the regulations to ensure the normal work of the general meeting. Through consulting services, the economic income of the association will be increased, so that the association can have a stable source of funds, improve office conditions and improve the quality of the two services.
Delegates, this year is the first year of China's accession to the WTO, and china rubber's industry is facing new opportunities and challenges. Under the new situation, China Rubber Industry Association has a long way to go and a great responsibility. We should continue to change our ideas, strengthen our own construction, improve our work efficiency, do a good job in two services, and work hard to build China into a powerful rubber industry in the world.
;