This article comes from the original article of Hebi Sohu Focus. If you need to reprint, please indicate "Hebi Sohu Focus".
Hebi Real Estate _ Hebi Real Estate Network _ Hebi Real Estate Information Network-Hebi Sohu Focus Network
Just six hours ago, a magical thing happened in Hebi!
I just brushed Weibo, and I saw that it has been searched hot. You are also curious whether it is in front of the screen! First take a screenshot for everyone to see:
It seems that this good fuel, which is both environmentally friendly and warm, is really a natural treasure.
So how should we check and accept the heating in the new house?
One: Check the safety and stability of radiator installation.
First, check whether the radiator pipe installation is firm and safe from the appearance, the pipe shall not be rusted or bent, and the pipe fittings shall not be buckled, broken wires and inaccurate angles as expected. You can also shake the pipes and radiators by hand to see if they are firm. If they are loose, fix them immediately.
Two: stress test.
The safety and tightness of heating system are very important. When closing the house, you must pressurize the radiator and pay attention to the water-tight place. Pay attention to whether there is water seepage in the upper and lower pipes and valves of the heating system to prevent water leakage from damaging furniture and floors. Check that there is no leakage to be qualified.
Three: Check whether there is a bleeder valve.
There should be an exhaust valve above the radiator, which should be unscrewed during acceptance. If it can't be unscrewed, it should be repaired immediately, otherwise the radiator is not hot, which will affect the normal use. Rubens radiator is equipped with automatic exhaust valve imported from Aladdin, England, which can complete the exhaust task without thinking about operation, without water seepage, effectively prolonging the life of radiator and making it a big step towards intelligence.
Four: when heating in winter, temporary heating measures must be taken, and the room temperature can be kept above five degrees Celsius. If the temperature is uneven, before the formal acceptance, the riser of each branch pipe and the valves on the branch pipe should be adjusted to make them basically balanced.
Five: When installing the radiator, the gradient of the inlet and outlet pipes should meet the requirements, which can be checked or measured with a level meter, a stay wire and a ruler. The reason of uneven pipeline slope is that the main pipe opens again after installation, the interface is not straight after installation, or the elevator is not tight, the riser is not tight, and the connection investigation was not carried out during pipeline prefabrication.
In short, the owner should not be careless when accepting the new house, only look at the surface situation, keep in mind the above precautions for accepting the radiator, and find the relevant departments to solve the problems in time. If you are not satisfied with the radiator and need to replace it, you can buy Rubens radiator again and replace the high-quality radiator in time before moving in, so that your family can have a warm and comfortable environment in their new home during the heating period.
Wine and home, new house and TA, smoke curling up, smiling like a flower ~