The function of the electronic handbrake is to stop temporarily on the stop-and-go section. For example, if you stop at the red light ahead, after you release the brake pedal, the automatic parking will start quietly and lock the wheels. Until you step on the accelerator pedal again, the electronic parking will automatically unlock the wheels, which is very fast and much shorter than pressing the electronic handbrake. Electronic parking is not only convenient to use, but also anti-skid, because the function of electronic parking is developed through ES P module. In the process of parking, ECU will judge the levelness of the car body and the torque required for wheel braking through the sensors installed on the car, so as to decide whether braking is needed to prevent slipping.
The electronic handbrake extends from the basic parking function to the automatic parking function AUTO HOLD. The application of AUTO HOLD automatic parking technology makes it unnecessary for drivers to brake for a long time when the vehicle stops. And the automatic electronic parking brake is started, which can avoid unnecessary sliding of the vehicle, that is, the vehicle will not slip behind at all.
Solution to the electronic parking fault: reset the electronic parking, turn on the car key, then step on the foot brake, then press the electronic handbrake down for 5 seconds and then pull the electronic handbrake up for 5 seconds to initialize the electronic handbrake.
(Photo/Text/Photo: Li Xiongwei) @20 19