1. Category
Scientific and cultural books
2. Book content
HG/T 3796. 1-2005 agitator types and basic parameters;
This standard replaces Hg/T 2123-1991agitator type and main parameters.
Compared with Hg/T 2123-1991,the main changes of this standard are as follows:
—— In terms of agitator types, the axial-flow flat propeller agitator widely used in recent years has been added, which provides strong support for improving the design level of agitator.
-Expanding the original paddle agitator, providing users with a wider choice;
—— Combine frame agitator and door agitator with similar types and using conditions into anchor frame agitator;
—— For the convenience of use, the model representation method and examples of agitator are added.
This standard was put forward by China Petroleum and Chemical Industry Association.
This standard is under the jurisdiction of the Technical Committee for Standardization of Mechanical Equipment in Chemical Industry.
This standard was drafted by Zhejiang Great Wall Reducer Co., Ltd. ..
This standard was drafted by Institute of Chemical Machinery of Zhejiang University and Tianhua Research and Design Institute of Chemical Machinery and Automation.
The previous version replaced by this standard is:-Hg/T 2123-1991.
HG/T 3796.2-2005 Mixing shaft diameter series;
This standard replaces HG/T 3 167- 1986 Mixing Shaft Diameter Series.
The main changes of this standard HG/T 3 167- 1986 are as follows:
—— According to the design and application of the mixing shaft and referring to foreign similar standards (DIN28 132), the shaft diameter series of the mixing shaft was expanded to 300mm, and five gears were added: 220, 240, 260 and 300.
—— Refined the parameters of shaft series in the old standard, and added four gears: shaft diameter 45, 55, 125 and 150;
—— The first gear with a nominal diameter of 65, which was not recommended in the original standard, was changed to a common option.
This standard was put forward by China Petroleum and Chemical Industry Association.
This standard is under the jurisdiction of the Technical Committee for Standardization of Mechanical Equipment in Chemical Industry.
This standard was drafted by Zhejiang Great Wall Reducer Co., Ltd. ..
This standard was drafted by Institute of Chemical Machinery of Zhejiang University and Tianhua Research and Design Institute of Chemical Machinery and Automation.
The previous version replaced by this standard is-Hg/T 3167-1986 (ZB/TG 92001-KLOC-0/986).
Paddle agitator HG/T 3796.3-2005, turbine agitator HG/T 3796.4-2005, disk turbine agitator HG/T 3796.5-2005, disk toothed agitator HG/T 3796.6-2005, disk toothed agitator HG/ t3799 T 3796.8-2005 propeller agitator.
3. Book catalogue
HG/T 3796. 1-2005 Types and basic parameters of agitator
HG/T 3796.2-2005 Mixing Shaft Diameter Series
HG/T 3796.3-2005 Paddle Agitator
HG/T 3796.4-2005 Start the turbine agitator.
HG/T 3796.5-2005 Disk Turbine Agitator
HG/T 3796.6-2005 Disc-toothed agitator
HG/T 3796.7-2005 Three-blade Reverse Bending Agitator
HG/T 3796.8-2005 Push agitator
HG/T 3796.9-2005 Plate Propeller Agitator
HG/T 3796. 10-2005 Screw agitator
HG/T 3796. 1 1-2005 belt agitator
HG/T 3796. 12-2005 Anchor Bracket Agitator