According to the Notice of the General Office of the State Council on Centralized Inspection of Work Safety (Guo Ban Power Generation [20 13] 16), the Emergency Notice of State-owned Assets Supervision and Administration Commission on Conducting Work Safety Inspection of Central Enterprises (Guo Zi Fa Zong [20 13]78) and the video conference on the work safety inspection of central enterprises held by the State-owned Assets Supervision and Administration Commission.
First, the overall goal
In accordance with the general requirements of full coverage of inspection activities, zero tolerance in inspection process, strict implementation of safety rectification and pragmatic inspection results, we will comprehensively investigate, find weak links, strengthen measures, implement responsibilities, seriously rectify, further improve the management and guarantee level of safety production of the group company, and establish and improve a long-term mechanism for safety production.
Second, the scope of inspection
The safety inspection covers all subordinate units of the Group Company, focusing on non-coal mines, dangerous chemicals and special equipment. Each unit should further clarify the key inspection sites within the responsibility management scope of the unit according to the actual situation.
Third, check the content.
1. Check whether the implementation plan is formulated, whether the safety management responsibility is implemented, whether the investigation and management of hidden dangers are strengthened, and whether the safety management is fully covered, leaving no dead ends or blind spots.
2. Whether all safety production systems are sound, including safety management, standardization construction, occupational health and safety management system construction and emergency management.
3. Do a good job in the investigation and management of hidden dangers in non-coal mines; Investigation and treatment of hidden dangers in the storage, use and abandonment of hazardous chemicals; The implementation of fire safety responsibility, daily inspection and emergency management; Safety management in construction site.
4, safety accidents and hidden dangers should be in accordance with the principle of "four pass", that is, the reason is not identified, the responsible person is not dealt with, the rectification measures are not implemented, the relevant personnel are not educated, and various preventive measures are not implemented.
5, the investigation of hidden dangers in flood season and the implementation of various safety precautions.
Fourth, the job requirements
This major inspection should focus on seven key work links: making inspection plan, mobilizing deployment, troubleshooting problems and hidden dangers, making rectification plan, implementing rectification measures, summarizing inspection results and establishing long-term mechanism, and adhere to the combination of self-inspection and supervision and inspection, comprehensive investigation and key rectification. In the inspection, leaders should pay attention to it, take effective measures, do not engage in formality, do not go through the motions, do not hide hidden dangers, do not leave dead ends, do not let go of clues, show no mercy, protect weaknesses and be soft, and strive for practical results.
Verb (abbreviation of verb) check method and timetable
Safety inspection is divided into three levels and four stages: first, self-examination and self-correction are carried out in an all-round way with grass-roots operation units as units; Second, all secondary units should check their own operating units; Third, the group company formed a safety production inspection team to conduct spot checks on the secondary units of the whole group. The inspection team consists of members of the safety committee of the group company, members of the safety production office and relevant personnel.
The first stage: make plans and mobilize deployment (before July 20). All units should formulate inspection plans, mobilize and deploy, and organize their implementation in light of the actual situation. Report the inspection plan and liaison personnel to the safety production office of the group company before July 20th.
The second stage: self-examination and self-correction, hidden trouble investigation (July-early August). All units shall conduct a comprehensive, in-depth and meticulous inspection on the work safety of their own units, and the inspection coverage rate shall reach 100%, especially the key places, key parts and key links prone to accidents.
The third stage: make the rectification plan and implement the rectification measures (August-early September). To find out the hidden dangers and problems, it is necessary to truthfully record the inspection time and place, formulate plans, implement rectification, and ensure that hidden dangers are cured. During this period, the inspection team of the group company will conduct spot checks on each subordinate unit and its inspection.
The fourth stage: summing up experience and establishing a long-term mechanism for safe production (September). All units should make an objective, comprehensive and realistic summary of the work safety inspection in time, analyze problems, find deficiencies, make timely rectification, sum up experience, and report the summary report to the safety production office of the Group Company before September 20th.
All units of the Group Company should closely integrate this safety inspection with their own OHSMS and standardization of production safety. Units that have not yet established an occupational health and safety management system should gradually establish an occupational health and safety management system or promote safety standardization. It is necessary to ensure that the responsibility of safety management is carried out by personnel and supervision, so that the safety production work of the group company can be further standardized, systematic and scientific, effectively prevent and contain all kinds of safety accidents, and strive to improve the safety guarantee level of the group company.
Scheme II: Implementation Scheme of Enterprise Safety Inspection
In order to actively respond to and implement the Notice of Xiaban Town on Printing and Distributing the Implementation Plan of Safety Inspection in Xiaban Town (Zhengzhen Zi [2013] No.27), our company decided to carry out safety inspection activities from July 3 to the end of the year in combination with the actual work and closely surrounding the relevant requirements of the notice. In this inspection, our company adheres to the policy of safety first, prevention first and comprehensive treatment, and further promotes this safety inspection from the aspects of implementing responsibilities, strengthening supervision, advanced prevention, basic management, key links and construction site. In order to ensure the effective development of this activity, the following implementation plan is formulated. as follows
I. General requirements
Organize extensive and in-depth safety inspection activities,
1. In order to strengthen the organization and leadership of this safety inspection activity, our company transferred the members of the Safety Committee to form a safety inspection team, and defined the division of labor to ensure the smooth progress of the safety inspection activity.
Second, the implementation steps
The activity is divided into four stages:
The first stage (June 4th to June 20th) is the publicity and deployment stage, and the specific arrangements are as follows:
First, hold a special meeting to seriously convey and implement the spirit of the town's mid-year work conference on safety in production and the implementation rules for this major inspection.
Two, do a good job in the publicity of safety and quality inspection activities. The company's office issued a notice to the company's subordinate departments respectively, requiring all departments of the company to cooperate effectively to complete the safety inspection. Hang banners with relevant contents on the construction site to create a good activity atmosphere. People-oriented, safety first, quality first, safety creates happiness, negligence brings pain and other banner contents. Security is benefit, security is happiness and so on.
The second stage (June 21~ September 20) is a stage of introspection:
1. During the inspection, the inspection team should guide all departments of the company to fundamentally improve the management level of safety technology, take effective measures to investigate and rectify hidden dangers in production safety, and resolutely prevent production safety accidents. Conduct a comprehensive inspection from the source, process and details, leaving no dead ends.
Key points of safety inspection
(a) the scope of safety inspection and key investigation items
1, safety status of three areas (construction site, living area and office area)
2, should know should be (employees' attention to safety in production, on-site management personnel's mastery of safety knowledge and hidden danger investigation, homework personnel's mastery of this type of work operation procedures and hazard prevention measures).
3. Safety information industry
4. Implementation of various safety management systems of the Project Department.
5. Whether the current on-site process safety measures with high risks can meet the safety requirements.
6. Strictly check the use of safety belts for aerial workers.
7. Check whether there is crossover operation on the construction site.
8, check the stability and safety of scaffolding.
9. Check whether the fire prevention measures for hot spots on site are implemented and whether the fire fighting equipment on site is reasonable and effective.
10, check whether the managers and workers are familiar with the preventive measures for the hazards on site.
1 1, according to the principle of safe production, check whether the site management personnel can effectively perform their safety management duties.
(2) Construction electricity consumption
1. Check whether the field wiring violates the requirements of three-level distribution and two-level protection, and check whether the wiring must be set with a special protection zero line.
2, check whether all kinds of braking settings and equipment match, whether it is safe.
3, check whether all kinds of equipment in violation of the principle of just one brake a box of electricity leakage.
4, check all kinds of box, brake, line for damage, failure, aging phenomenon.
5, check whether there is a phenomenon of private pull disorderly connect, workers' dormitory and damp places whether to use low-voltage lighting system.
6, check whether there is a mixed connection phenomenon between the field protection zero line and the work zero line.
(3) Fire fighting
1, check whether all fire extinguishers are effective and whether fire hoses are complete.
2. Check whether the hot work system is strictly implemented at the site.
(4) Small machines and tools
1, check whether the wiring of small machines and tools is in place safely, and whether there is any special leakage protection and protection zero connection; Check whether the length of primary and secondary wires of electric welding machine meets the requirements, and the number of joints shall not exceed 3, and there shall be no aging phenomenon.
2, check all kinds of hand tools, small machine transmission part must have a protective cover, should have a protective zero and leakage protector, the power cord can't be damaged.
(5) Motor vehicles
1, check whether the motor vehicle is in a safe state and whether the maintenance work is timely and orderly.
2, check whether the motor vehicle driver holds a valid certificate.
3, regular safety training for motor vehicle drivers, it is forbidden to drive with faults, it is forbidden to speeding, it is forbidden to drink and drive, put an end to fatigue driving.
The third stage (September 20th to September 30th) is the rectification stage:
First, according to the problems found in the second stage, formulate corresponding rectification measures and pay close attention to implementation. Strive to achieve the radical cure of outstanding problems, basically eliminate the problems that have not been cured for a long time, and ensure the orderly and controllable safety and quality of the construction site.
At this stage, combined with the above inspection contents, the safety inspection team will keep an eye on the hidden dangers, carefully investigate the hidden dangers, take timely measures to rectify the problems found, and immediately solve the problems that can be solved immediately, and formulate rectification plans for those that cannot be solved immediately, and make rectification within a time limit to effectively eliminate safety hazards. The rectification of hidden dangers should be meticulous, not mere formality, not mere formality.
Second, carry out the safety and quality inspection of the project department from time to time to realize the dynamic management of safety and quality. At the same time, combined with inspection, sort out the quality and safety situation on site, thoroughly investigate the shortcomings and loopholes in quality and safety management, further improve various quality and safety management rules and regulations and guarantee systems, strengthen on-site monitoring, and ensure that all quality and safety management requirements are implemented.
The fourth stage (September 30th ~165438+1October 3rd1) is the analysis and summary stage:
After the above three stages, the inspection team carefully analyzed all kinds of problems found in the inspection, and put forward effective rectification measures for the outstanding and universal problems found in the inspection, so as to ensure that the outstanding quality problems are thoroughly cured, eliminate all kinds of quality hidden dangers in the construction site and never leave a blank.
After the inspection activities, all relevant departments should continue to carry out self-examination and self-correction, strengthen the supervision and management responsibilities of their departments for safety production, enhance the safety awareness and ability of operators, organize managers and operators to summarize and evaluate the activities, ensure that the whole team takes this inspection as an opportunity to firmly establish the concept of scientific development and safe development, further work hard on long-term management, strengthen management, implement responsibilities, continuously improve the level of safety production management, and make unremitting efforts to create a good safety production environment.
Scheme III: Implementation Scheme of Enterprise Safety Inspection
In order to conscientiously implement the spirit of the national and provincial teleconference on safety in production on June 7th, the General Office of the State Council's notice on centralized inspection of safety in production (Guo Ban Power Generation No.201316) and the specific requirements of the teleconference on safety in production on the afternoon of June 17, the company decided to carry out a safety inspection from June to the end of September. In order to ensure that the company's safety inspection activities are carried out in a solid and in-depth manner, this implementation plan is specially formulated.
I. Overall requirements and objectives
Conscientiously implement the recent important instructions of the central leading comrades and the spirit of the group company's video conference, regard centralized inspection as the primary task of current safety production, comprehensively and thoroughly investigate and control the hidden dangers of safety production, plug the loopholes in safety supervision, and strengthen safety production measures in accordance with the general requirements of full coverage, zero tolerance, strict law enforcement, and practical results; Firmly grasp the key links such as making inspection plans, mobilizing and deploying at different levels, troubleshooting hidden problems, making rectification plans, implementing rectification measures, summarizing inspection results, and establishing long-term mechanisms. Through the safety inspection, comprehensively find out the hidden dangers and weak links, implement the responsibilities, seriously rectify and improve the system, completely eliminate major safety hazards, enhance the safety awareness of all staff, further improve the management level of safety production, and effectively prevent accidents. Four changes in efforts to achieve practical results, namely: the change of safety production work from passive response to active prevention; The safety consciousness of workers has changed from asking me to being safe; From only paying attention to the investigation of hidden dangers in major dangerous parts to daily inspection of general posts and safety corners at the same time; From the supervision of the competent department and office to the regular inspection by the professional inspection team, the ability of on-site hidden danger investigation will be improved.
Second, organization.
The company set up a safety inspection leading group.
Team leader:
Deputy team leader:
Members:
Under the office, the office is located in the safety and environmental protection department.
Director of the office:
Deputy director:
Members:
Third, the scope of inspection
Conduct safety inspection on all operating posts and key dangerous parts of the company. The key point is:
(a) gas producer, natural gas boiler room;
(2) Liquid ammonia storage tank area, ammonia decomposition room and nitrogen production room;
(3) Underground hydraulic station and hazardous waste storage area;
Fourth, check the content.
(a) the implementation of the responsibility system for production safety and safety operation procedures. As the first person responsible for production safety, whether the top leaders of each unit put safety management in the first place, whether they hold regular production safety analysis meetings, and the implementation of the responsibilities of safety management personnel at all levels. Inspector's mastery of safety operation procedures.
(two) the detection and use of special equipment such as crown block, pressure vessel, boiler and pressure pipeline, including the inspection and test of its safety accessories, and the establishment of accounting. Check the maintenance and inspection of emergency relief materials.
(three) the integrity rate of fire safety facilities and equipment and the four abilities of employees, and check whether employees are familiar with the use of fire equipment, inspection items and fire control obligations.
(4) Training and drills of emergency plans, check whether each unit has formulated various emergency plans and on-site disposal plans as required, and conduct an emergency plan drill without notice in each unit to check the emergency disposal ability of employees and the inspector's mastery of emergency plans.
(five) illegal operation, illegal command and violation of labor discipline that are easy to occur in the process of employee operation.
(six) to train employees in safety, fire protection and occupational diseases, and to check whether the personal files and training records of employees are true and effective.
(seven) the implementation and record of the standardized post system of the security team;
(eight) whether there are unsafe factors in the placement of materials at the production site, and conduct a comprehensive inspection on the site in combination with cleaner production to see if the existing position and state of materials meet the safety requirements.
(9) Investigate and rectify the hidden dangers of safety accidents, and check whether each unit has established a hidden danger rectification ledger, and whether it conducts acceptance review management according to PDCA management mode.
(ten) to carry out the prevention and control of occupational diseases. Whether each unit has established occupational health files as required, whether employees have received occupational health training, and the wearing conditions of employees' protective equipment, etc.
Verb (abbreviation of verb) checking method
(1) unit self-check. All units must conduct a comprehensive, in-depth, meticulous and thorough inspection of their own safety production. In accordance with the requirements of relevant laws, regulations, rules and technical standards, the key places, key parts and key links prone to accidents are strictly and seriously inspected, a list of hidden dangers and problems is listed, a ledger is established, a rectification plan is formulated, and rectification measures, responsibilities, time limits and accident prevention measures are implemented. The investigation, rectification scheme and rectification results of the unit shall be signed by the principal responsible person of the unit, submitted to the Safety and Environmental Protection Department, and notified at the dispatching meeting of the branch.
(2) professional inspection. Based on the principle of who is in charge and who is responsible, six professional groups, such as crown block, pressure vessel and technical equipment, have been set up in various professional offices to organize their professional groups to conduct safety inspections at least twice a week. Relevant personnel shall be organized to formulate the rectification plan, determine the person responsible for rectification, define the rectification period, and conduct acceptance and reinspection in time. All inspection results shall be notified at the company's early meeting and reported to the Safety and Environmental Protection Department for the record.
(3) Innovative inspection methods. On the basis of comprehensive inspection by the company's professional team, the Safety & Environmental Protection Department will also organize cross-inspection of all units by listening to employees' opinions, surprise night inspection and back inspection, so as to improve the actual effect of the major inspection. For major hidden dangers, it is necessary to supervise them and check them to the end. Hold a safety inspection summary and analysis meeting every half month to summarize and analyze the safety inspection work in the past half month, and report major hidden dangers and rectification.
Implementation steps of intransitive verbs
From June to the end of September in 20 13, it is divided into three stages:
(1) Deployment mobilization stage (June1July-June 20th).
All branches and subsidiaries should organize leading cadres, technical departments, safety managers and workshop directors to hold safety inspection mobilization meetings. All units should formulate the implementation plan of self-examination and self-correction of hidden dangers in their own units in light of the actual situation. And using the time before and after going to work, the implementation plan of safety inspection will be deployed to the team level at the first time to mobilize the enthusiasm of employees to participate in the self-examination of post hidden dangers.
(2) Comprehensive inspection stage (June 17-September 20th)
All units and departments shall, on the basis of thorough investigation, formulate inspection plans according to the principle of division of labor by professional groups and inspection twice a week to ensure full coverage of inspections, and report the inspection plans to the Safety and Environmental Protection Department. We must adhere to the attitude of zero tolerance for hidden dangers, no matter how small the hidden dangers are, we must deal with them in line with the principle of "four don't let go". At this stage, safety management personnel at all levels should go deep into the front line every day to understand the self-inspection of employees and comprehensively inspect the production site.
(3) Comprehensive rectification and consolidation stage (September 21-September 30).
All units, departments and offices should comprehensively rectify the problems and hidden dangers found in the major inspection activities, increase the monitoring and supervision of major hidden dangers, ensure the implementation of responsibilities, measures, funds, time and Plan V, and give the assessment of 1 1,000 yuan to the top leaders of units and departments with no hope of rectification to ensure the effectiveness of the major inspection activities.
Seven. Related requirements
(1) Strengthen organizational leadership and implement work responsibilities. The main persons in charge of all units and departments should personally participate in the deployment safety inspection, do a good job in mobilization, ensure human, material and financial resources, and clarify responsibilities, so as to mobilize and deploy to the team, implement responsibilities to the team, and conduct self-inspection to the team.
(2) Strengthen publicity and guide employees to participate. Give full play to the role of class meetings, Friday safety activities and workshop publicity columns, create a strong safety production atmosphere, ensure the safety production alarm bell to ring, and make the safety culture deeply rooted in the hearts of the people. At the same time, after a long time of safety inspection, the hidden dangers are not in place, and they should be notified and assessed.
(three) strict inspection, in order to achieve practical results. The safety inspection of all units and departments should effectively leave no dead ends, no blind spots and no going through the motions. With a more rigorous style and a zero-tolerance attitude towards hidden dangers and problems, we will stick to our commitments, strictly control the customs, be loyal to our duties, go deep into the scene, make careful arrangements, and pay close attention to implementation to ensure that the inspection is effective.
(four) timely report on the development of major inspection activities. Each unit shall report the hidden danger self-inspection plan to the Safety and Environmental Protection Department, and the team leaders of all disciplines shall make full use of it, refine the inspection plan and scheme, and report it to the Safety and Environmental Protection Department. Report the development of safety inspection activities every Thursday. Report the summary of major inspection of the month on 24th of each month, and report the summary of major inspection activities before 20th of September.
Scheme 4: Implementation Scheme of Enterprise Safety Inspection
In order to conscientiously implement the spirit of a series of important instructions of the CPC Central Committee, the State Council, the provincial party committee and the provincial government on strengthening production safety, profoundly draw lessons from recent major production safety accidents, strengthen the main responsibility of production safety in oil production enterprises, implement the safety supervision responsibility of local governments and functional departments, effectively curb the occurrence of serious accidents, and promote the sustained, stable and improved situation of production safety in oil production enterprises. According to the spirit of the Notice of the State Council Security Committee Office and Provincial Security Committee Office on Comprehensively Carrying out Safety Inspection of Petroleum Production Enterprises, and in combination with the actual situation of our city, we have studied and formulated the Implementation Plan for Safety Inspection of Petroleum Production Enterprises in Jinan, which are hereby printed and distributed to you, please implement it carefully.
I. Work objectives
(1) Find out the base of oil-producing enterprises. Comprehensively find out the quantity, type, scale and basic situation of safety production of production and business units of petroleum production enterprises, find out the living quarters and personnel gathering places around Sangao (high-yield, high-pressure and high-sulfur) gas field, and establish a basic database of basic situation of safety production of petroleum production enterprises (see annex for investigation summary).
(two) in-depth investigation and management of hidden dangers. Strictly control the laws and standards of oil and gas safety production, investigate potential safety hazards by enterprises, identify the weak links and outstanding problems of safety production, formulate feasible rectification plans, implement responsibilities, supervise and inspect, and rectify within a time limit.
(three) the implementation of the two main responsibilities. Implement the Notice of the General Office of the People's Government of Shandong Province on Printing and Distributing the Interim Provisions on the Responsibility for Work Safety of Production and Business Units (Lu Zhengban Fa [2007] No.54) and the Notice of the General Office of the People's Government of Shandong Province on Printing and Distributing the Interim Provisions on the Responsibility for Work Safety Supervision and Management of the Government and Its Relevant Departments (Lu Zhengban Fa [2008] No.22), and earnestly implement the main responsibility and supervision responsibility for work safety.
Second, the inspection focus
(a) the implementation of the main responsibility for production safety in oil production enterprises
1. Carry out the Party's and the State's guidelines, policies and regulations on production safety.
2 the establishment, improvement and implementation of the responsibility system for production safety, safety rules and regulations and safety operation procedures.
3. Safety management organization setting, staffing and safety investment.
4. Post personnel safety education and training, special operations personnel related certificates, direct operation link approval and monitoring.
5. Investigation and management of hidden dangers. The establishment and implementation of the hidden danger investigation and management system, and the rectification of hidden dangers found in the special action of safety hundred-day inspection.
6. Implementation of blowout prevention and hydrogen sulfide prevention measures during drilling and operation. Whether the drilling engineering and geological design meet the specification requirements, whether the equipment and facilities are matched, whether the personnel operation is standardized and whether the emergency measures are complete.
7. Three construction projects will be implemented simultaneously.
8. Establishment and exercise of emergency plan and reserve of emergency rescue materials and equipment.
(2) Implementing the main responsibility of government safety supervision.
1. Implement the guidelines, policies, laws and regulations related to safety production in the oil industry.
2. Allocation of oil safety supervision forces, accident investigation and accountability of oil production enterprises, and handling of illegal acts of enterprises.
3. The rectification of hidden dangers found in the 100-day safety inspection special action.
4. Training the main persons in charge of the production and business operation units of oil extraction enterprises within their jurisdiction and the safety production management personnel.
5. Examination, issuance and management of safety production licenses of oil production enterprises.
6. Design review and completion acceptance of safety facilities of construction projects.
7. Daily supervision and inspection of oil production enterprises.
Third, the timing.
(a) self-examination and self-correction stage (before 65438+February 15). All oil production enterprises should organize experts to go deep into the site to comprehensively inspect the development of enterprise safety work and the investigation and treatment of hidden dangers, and the inspection and treatment area should reach 100%. Decisive measures should be taken to find potential safety hazards and rectify them immediately; For hidden dangers and problems that cannot be rectified immediately, responsibilities, funds, deadlines and emergency preventive measures should be implemented, and follow-up monitoring should be strengthened to prevent production safety accidents.
(2) Supervision and inspection stage (65438+February 16 to 65438+February 25th). The Office of the Municipal Safety Committee will supervise the implementation of the safety inspection of oil production enterprises one by one, and actively prepare for the inspection of our city by the Provincial Safety Committee. If the rectification of major hidden dangers is not in place and an accident is caused, the relevant units and personnel shall be investigated for responsibility according to law.
(3) Summary stage (from February 26th, 65438 to February 26th, 65438 to February 30th, 365438). The relevant county (city) District Safety Committee Office and oil production enterprises should conscientiously sum up the safety inspection of oil production enterprises, and submit a summary report to the Municipal Safety Committee Office before June 65438+February 3 1 2008, including the basic situation of oil production enterprises within their jurisdiction, the investigation and management of hidden dangers, especially the implementation of measures such as major hidden dangers management and cancellation, and emergency disposal.
Fourth, the job requirements
(1) Strengthen organizational leadership. Carrying out safety inspection of oil production enterprises is a concrete action to implement the spirit of the instructions of the CPC Central Committee, the State Council and the provincial party committee and government on strengthening production safety, a deepening of the special action of 100-day supervision of production safety, and an important measure to implement the requirements of the year of managing hidden dangers in production safety. All localities, relevant units and oil production enterprises should attach great importance to it, earnestly strengthen leadership, make careful arrangements and pay close attention to implementation.
(2) Pay close attention to comprehensive management. It is necessary to thoroughly investigate the hidden dangers of oil production enterprises, sort out and classify all kinds of hidden dangers, and pay close attention to governance. Enterprises with prominent hidden dangers and possible major accidents should immediately take measures to stop production and rectify, and strengthen monitoring to prevent accidents. It is necessary to establish and improve the monitoring mechanism of major hazard sources and strengthen tracking and monitoring; Establish and improve the emergency management mechanism, formulate emergency plans, clarify the notification, evacuation and emergency rescue procedures in case of emergency, and establish a joint defense linkage mechanism between enterprises and surrounding villages, factories and residential areas. In case of danger, they should be able to move and evacuate immediately.
(three) to effectively implement the main responsibility of enterprise safety production. Establish and implement the responsibility system for production safety at all levels with the legal representative responsibility system as the core of oil production enterprises, and improve the implementation of rules and regulations and operating procedures; Equipped with corresponding safety management institutions and management personnel; It is necessary to increase investment in safety funds, actively carry out safety science and technology research, and improve safety production conditions; It is necessary to strengthen the safety management of enterprises, and earnestly achieve a sound system, strong implementation, solid foundation, scientific means and effective work to ensure the safe operation of enterprises.
(four) to further strengthen the main responsibility of government safety supervision. Governments at all levels and their safety supervision departments should urge enterprises to conscientiously implement the national laws and regulations on production safety, conscientiously implement the principle of territorial and hierarchical management, strictly implement the responsibility of safety supervision of oil production enterprises, and put an end to the blind spot of supervision. It is necessary to establish a supervision and incentive mechanism, organize professional and technical personnel to go deep into the site for comprehensive and detailed inspection, and ensure that the inspection does not go through the motions and leaves no dead ends. We must strictly investigate and deal with violations of laws and regulations. If the supervision is not in place and the supervision of major hidden dangers is weak, the relevant personnel should be held accountable.
;