How to set up wireless router for static IP of company LAN?

The method of setting wireless router in the company intranet: the wireless router is used as a switch.

Note: Router a= main router; Router b= wireless router.

1. Router A is set normally.

2. Setting method of router B:

Note: Disconnect the connection between routers A and B first, and then connect after router B is set up.

(1). First, clear the wan port and connect all the wiring to the lan port.

② Turn off the dhcp service of route B. ..

③ Modify the ip address of the LAN port of route B (different from the network segment of router A), and change the IP to 192. 168.200.200.

Turn on the wireless function of the router.

1, select Wireless Settings-Basic Settings.

2. Check to turn on the wireless function, and then click Save.

Set wifi password

1. wireless settings-wireless security settings-select WPA-PSK/WPA2-PSK.

① Authentication type: automatic.

② Encryption algorithm: AES.

3.PSK password is wireless password. Set the required password.