Yongyong Machinery Co., Ltd. was established on 20 10, located in Tianjin Baodi Jiuyuan Industrial Park. Brave Machinery is a corn harvesting machinery manufacturer integrating independent research and development, production, sales and service. The company has been committed to the research of cutting-edge technology of corn harvesting machinery, focusing on the upgrading of product quality and paying attention to the needs of end users.
At present, the number of harvesting rows such as 3 rows, 4 rows, 5 rows, 6 rows, 7 rows and 8 rows has been formed, and the row spacing of the header covers 300, 565, 438+00, 550, 590, 600 and 650 mm The harvesting functions include peeling, straw crushing and recycling, straw crushing and returning to the field, and straw collection and leveling, among which dozens of varieties are combined.
Matters needing attention in the use of harvester
Before operation, the dimensions of related parts of corn harvester should be adjusted according to agronomic requirements. First of all, we should adjust the spacing of the grain separator according to the local planting ridge spacing, so that the grain separator can reliably meet the functional requirements of supporting and feeding, and at the same time, there will be no problems such as straw being pushed down by the grain separator or blocked due to poor feeding. At the same time, the movement speed of the cutter should be adjusted according to the planting density to avoid the phenomenon that the straw can not be completely cut off and dumped because of the slow speed.
Secondly, we should observe whether the speed of the elevator can meet the requirements of corn harvest. If the elevator does not deliver corn in time, it is likely to cause corn ears to accumulate on the elevator and be blocked.
Thirdly, the relevant parameters of the peeler should be adjusted according to the degree of skin protection of corn varieties. If the corn is dry and the seeds are loose, the rotation speed of the peeling roller and the pressure of the ear pressing plate should be appropriately reduced to reduce the loss of corn seeds. If the corn husks are tight, it is necessary to increase the rotating speed of the peeling roller and the pressure of the ear pressing plate to ensure that the corn ears are peeled cleanly.
The above contents refer to Baidu Encyclopedia-Brave Machinery Co., Ltd.