Labyrinth feature
1, labyrinth runner and oil dripping hole are integrally formed by vacuum hot pressing at one time, with good adhesion and high manufacturing accuracy.
2. Turbulence produces more water and has strong anti-clogging ability.
3. Labyrinth runner design, uniform water outlet, up to more than 85%, laying up to 80 m..
4. Light weight, convenient installation and management, and low manual installation cost.
Patch function
1, the built-in emitter has its own filter window, which has good anti-blocking performance.
2. Turbulent channel design. Uniform irrigation.
3, the transmitter and the pipeline have strong integrity,
4. The distance between transmitters can be flexibly adjusted, and the application range is wide.
5. The price is low.
Applicable conditions
1, used for planting crops in greenhouse, reducing pests and diseases, saving chemical fertilizers and pesticides and improving economic benefits.
2. When used for orchard irrigation, it can effectively increase yield, improve fruit quality and effectively control weed growth.
3. It is suitable for cotton, Chinese herbal medicine, watermelon, field vegetables and other field crops, and improves the intensity of mechanized planting.
4. The drip irrigation belt can be bent and laid around the ridge, which is convenient to operate.
fixed
1, according to the requirements of design documents, comprehensively check the equipment model, specification, quantity and quality, and it is forbidden to use unqualified products. The equipment to be installed should be kept clean, and plastic pipes should not be thrown, dragged or exposed to the sun.
2. Install water meters, valves and filters according to design requirements and flow signs. The filter and the branch pipe are connected by direct thread connection.
3, threaded pipe installation drip irrigation system installation matters needing attention
When the original tape needs to be wound, the through lock nut should be tightened.
4. Before installing the bypass, first punch a hole in the branch pipe with a special punch. When drilling, the puncher shall not tilt, and the depth of the drill bit entering the pipe shall not exceed 1/2 pipe diameter; Then press the bypass into the branch pipe.
5. Cut the drip irrigation pipe (belt) according to the length slightly larger than the plant row, arrange the drip irrigation pipe (belt) along the plant row, and then connect one end with the bypass.
6. After the drip irrigation pipe (belt) is installed, open the valve to flush the pipeline with water, and then close the valve; Install a drip irrigation pipe plug at the end of drip irrigation pipe (belt); Install a branch pipe plug at the end of the branch pipe.
7. The installation sequence of the whole drip irrigation system is: valve, filter, straight-through, branch pipe, perforation, bypass, drip irrigation pipe (belt), flushing pipe and plug.