2. As the standard model of shot blasting machine, the hook shot blasting machine has a maximum bearing capacity of 1, kg. This shot blasting machine is an ideal cleaning and strengthening equipment, which is mainly suitable for surface treatment of various medium and large castings, forgings, weldments and heat-treated parts, including fragile and irregularly shaped workpieces.
3. Trolley shot blasting machine Trolley shot blasting machine is mainly suitable for mass production of surface cleaning of small and medium-sized workpieces. The equipment of this specification is suitable for engine connecting rods, gears, diaphragm springs, etc. It is widely used in foundry and automobile manufacturing, and has the characteristics of high production efficiency, good sealing effect, compact structure, convenient loading and unloading and high technical content.
4. Shot peening machine for inner and outer walls of steel pipes uses shot peening technology to clean the inner wall of cylinders. It is a new type of shot peening machine for inner wall of network management. It mainly uses compressed air as power to accelerate the shot to generate certain kinetic energy and spray the inner wall of steel cylinders. When the steel cylinders are positioned in the spray gun room, the spray guns will automatically extend into their respective bottles, and the spray guns will move up and down in the cavity to complete the omni-directional spray cleaning of the inner wall of the cylinders. It is a type selected by the gas cylinder industry.
5. The road shot blasting machine uses the motor-driven shot blasting wheel to generate centrifugal force and wind force in the process of high-speed rotation. When the shot with a certain granularity flows into the shot feeding pipe (the flow rate of the shot can be controlled), it is accelerated and brought into the high-speed rotating shot dividing wheel. Under the centrifugal force, the shot is thrown into the directional sleeve through the window of the directional sleeve (the throwing direction of the shot is controlled), picked up by the high-speed rotating blade, and along the direction. Then the projectile, dust and impurities pass through the rebound chamber and come to the top of the storage hopper. The automatic back-blowing dust collector can automatically clean each filter element at intervals through the back-blowing air provided by the compressor. Finally, in the machine, the pellets and the cleaned impurities are recovered separately by airflow cleaning with a supporting vacuum cleaner, and the pellets can be reused. The shot blasting machine is equipped with a dust collector, which can achieve dust-free and pollution-free construction, which not only improves efficiency, but also protects the environment.